Shopping Cart

Your cart is empty.

Your cart is empty.

KoolMore 2 Compartment Stainless Steel NSF Commercial Kitchen Prep & Utility Sink with Drainboard - Bowl Size 14' x 16' x 11'

Free shipping on orders over $29.99

$499.00

$ 99 .00 $99.00

In Stock

1.Size:1 Drainboard


About this item

  • HEAVY DUTY STAINLESS STEEL - Built with high quality durable 304 type 18 gauge stainless steel which is rust and corrosion resistant and will withstand the high volume fast pace commercial kitchen environment.
  • DEEP BOWL SIZE - The 11” deep by 14” wide bowl makes it great for washing pots or rinsing vegetables comfortably without taking up to much space, overall dimensions 29”L x 21”W x 44.5”H
  • CONVENIENT DRAINBOARD - The 12” right side drainboard provides just enough space to keep food while prepping or to dry dishes, it has a slanted surface to drain excess water
  • ADJUSTABLE BULLET FEET - The 1 1/2” plastic bullet feet allow you to level the sink and protects your floor from scratches. For optimal stability, the sink should be secured to a wall.
  • HIGH BACKSPLASH AND RAISED EDGES – The 11” backsplash with 8" center holes for faucet mount (not included) will keep walls dry and clean while the raised edges will prevent splashes and overflow


The KoolMore SB141611-12L3 two-compartment stainless steel food prep/utility sink is made of high-grade heavy-duty 18-gauge 304 type stainless steel and is constructed to withstand a lifetime of heavy use. The 14 x 16-inch bowl size is large enough to wash your pots and trays without taking up too much space, a perfect solution for cafes, bakeries, and all types of restaurants, at home in your garage, backyard, or patio as an outdoor sink. A 12 in-left side drain board provides convenient space when washing meat, poultry, vegetables, or fruits, stacking your dirty dishes, or air drying. It is NSF certified which means it meets the standards imposed by the NSF, which focuses on public safety, health, and the environment. The bowl has rounded corners that make it easy to clean every nook and cranny and will save staff precious time. Installation is quick and straightforward; the backsplash has pre-punched 1.2 in. holes to fit standard size 8 faucets (faucets not included). Included with your sink are four galvanized steel legs, one drain basket and strainer, one Allen wrench, and eight screws. Please note, that this sink is designed to be used in a commercial environment. Therefore, you can expect some slight scratches and scuff marks. Features: Adjustable 1 1/2 bullet feet for the best possible stability, Left Side 12-inch drainboards, Rolled edges to prevent overflow, Rounded corners for easy cleaning, Protective backsplash to prevent splashes, Slanted drainboard surface to drain excess water, Stainless steel leg sockets, Corrosion-resistant galvanized steel legs, Stainless steel drain basket included, and a 90-Day Warranty.


Randy Larson
2025-07-03 10:11:27
ORIGINALKLY: I had rated this sink a 3-STAR because it was a week late in delivery and two welds were broken underneath (see 'ORIGINAL' comments below).HOWEVER, after calling the KOOLMORE Customer service department (rep: Menachem) they not only apologized, but they paid for me to take the sink to a local welder and have the welds fixed . . . granted, it was a little hassle, but I needed the sink immediately and I couldn't wait for another sink to arrive.I am very impressed with their customer service and other than the missing set screws and broken welds, the sink is well-built. They are also sending me a new set of set-screws . . . there are human errors that happen and I just want to say again, KoolMore understood my dilemma and made it happen immediately . . . excellent company!ORIGINAL COMMENT -After waiting THREE WEEKS for the sink to be delivered (one week later than what was originally scheduled with me).The KOOLMORE sinks seems like a decently made sink at first blush, but the box was missing the 'set screws' that tighten the legs to the sink base and one of feet that hold the legs had two broken spot welds.I will returning this sink if the maker does not want to pay for the welds to be fixed.Very disappointed.
ekstrom
2025-06-16 13:23:50
Swapped out this sink in the hubby's brew room for the existing counter and double sink. So much better. Easier to keep clean. No dark, icky cabinets underneath. It looks very professional. Delivery was excellent, and the box was very well packed. I was impressed. I had been worried after reading the reviews, but mine was in perfect condition. So glad I bought it.
Customer
2025-06-03 21:53:01
Wish the legs had a large diameter foot pad rather than a small point, and the leg were stainless steel.So far, the only cosmetic problem, --is the visible seam in front of the two sinks and when the plastic film was installed. There are several cut marks on the stainless as the plastic film was installed. Poor workman ship. Plus, there is a weld splatter on the finish surface.Well packed.
Kenny
2025-05-05 10:24:33
The sink made it here with no apparent shipping damage but was missing hardware to attach the legs. I contacted Koolmore support. They answered the phone number and the gentleman was polite... however it's almost a week later and no hardware after I sent pics they requested of the unit. I emailed again asking when they'd get hardware to me or what screw/bolt size or what else was needed and the only reply was 'sorry the parts are backed up'. No explanation other than that, no info on parts, and no timeline.So now I have a sink that I cannot attach the legs to and no further information or assistance.I was not able to figure it out, so had to take the sink to a machinist (luckily I have a truck and can lift a 52inch wide double basin sink by myself) who was able to 'probably' identify what type missing bolts go into the threaded holes on the sink bottom. After driving to 3 places looking for them I gave up. So meanwhile I cannot install this sink and I will try to find some fasteners online at an ADDITIONAL COST TO ME. Also the legs fit loosely into the holes on the sink base so not sure if there is some other hardware component besides screws/bolts missing...the Koolmore guy did not seem to know either which is why I guess he asked for pics.SO, it's a Chinese sink, missing parts when it arrived, and you're on your own. I'd recommend just sticking with Advance Tabco or some reliable brand and buying through your normal local distribution channel.I won't go with Koolmore again. WASTE OF TIME AND MONEY.
S. Estes
2025-05-01 17:19:07
What an amazing sink. It's been really nice to use in our pottery studio. We have been really blown away by the quality, packaging, and responsiveness of KoolMore! Shipping was very fast!
JM
2025-02-18 16:32:14
The welds are weak and the bead is uneven/clumpy. The size of the bowls make it difficult to find a commercial faucet/sprayer with the short faucet. The standar 12” faucet has to be turned almost 45 degree angle so water isn’t flowing outside the bowl.Sink needs to be mount to wall for stability.Would not buy again even at the discounted price I gave.
Bitter Reality Brewing
2025-02-17 13:43:45
Great sink for a great value. I found this sink at the last minute and I'm happy I did! It has been a great sink for cleaning and preparing things I need for home brewing. With two basins it helps for cleaning with alkaline in one and acid wash in the other basin. The side shelfs are a little small, but work great at allowing excess water to drain off as needed.
Shawna Klennon
2024-12-28 10:35:03
I got this sink for my small wine bar. Looks great and was a good price.
Recommended Products