Your cart is empty.
Your cart is empty.
This Koyo TR-series thrust roller bearing washer is designed for use with Koyo NTA-series thrust needle roller and cage assemblies in applications where adjacent components cannot serve as raceways. This thrust washer serves as a raceway surface for the thrust assembly’s rolling elements and can be used as a shaft washer (bore-piloting washer) fixed on the shaft or a housing washer (outer diameter-piloting washer) fixed in the housing. Both sides of the washer can be used as raceways and are flush ground for higher speeds and greater running accuracy than unground raceways. The washer is made of low alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. This thrust washer is for use in various applications including machine tool drive shafts, automotive steering gears and clutches, rotary tables, outboard motor propellers, and household appliances.
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
Koyo Bearings USA manufactures bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009 and headquartered in Canton, OH, meets International Organization for Standardization Technical Specification (ISO/TS) standard 16949 and ISO standard 14001.
Courtney Less
2025-08-10 15:09:09
Worked great on my clutch
Jerry Bruley
2025-07-08 10:56:03
This product has given me years of use with little to no wear. I would recommend this product and have to many of my friends. You will not be disappointed.
Leonard R Chapman
2025-02-24 11:07:58
How do you review a shim?
John
2025-02-19 09:23:26
Rusted and seized after about 10,000 miles.
Omar Elgazzar
2025-02-07 10:56:59
I bought these to "sandwich" a bearing (koyo nta-4052) in between them. They have an inner diameter of 2.5 inch...I am using these as part my suspension setup; They sit between an adjustable sleeve and spring to allow for movement when adjusting my car's ride height...so far so good. When it gets dirty though, it becomes an entirely different matter.
Bill
2024-12-13 17:15:44
Good.
Recommended Products
$25.92
$ 12 .99 $12.99
$29.70
$ 13 .99 $13.99