Your cart is empty.
Your cart is empty. For wood project enthusiasts, hobbyists, and DIYers, the Kreg Drawer Front Mounting Pro Kit is an accessible carpentry tool. Whether you're a professional carpenter or a DIY enthusiast, our kit will simplify the process of mounting and aligning drawer fronts. No more struggling to hold pieces in place with one hand as you work. Our thick steel design features large clamp pads, a GripMaxx anti-slip surface, and ribbed corners to maintain project stability.
The Drawer Front Mounting Pro Tool Kit includes left and right drawer mounting tools and 7 setup and spacer shims, which can be stacked together via magnets to help you set consistent gaps and reveals. The shims come in four sizes: 3/32" for inset drawers, 1/8", 1/4", and 3/4". This versatility makes our kit perfect for drawers for home offices, kitchen drawers, and more.
Our Drawer Front Mounting Pro Kit is a testament to Kreg's commitment to providing high-quality carpentry tools and accessories. With our kit, you'll be able to achieve professional-grade results every time.
At Kreg, woodworking is our passion. We take pride in a project well-done, and we understand how important the tools at hand are to the final product. That's why we craft the very best woodworking tools. We want our customers to feel confident in their ability to finish quality products with Kreg tools in hand.
G. Miller
2025-09-06 17:24:55
This has proven to be pretty darn handy for installing drawer fronts. I had about 100 to do in a new house, and it definitely made getting them aligned much easier. Recommended because it saves you time and frustration, which is a lot more valuable than the cost of the tool.Be aware, these do not not work ideally in every situation. Due to the thickness of the metal, sometimes there was not enough space between the drawer box and the cabinet opening to close the drawer (to get alignment really close). Also, if you have end-panels installed that extend-out past the drawer front, they'll interfere with this bracket (and you can't get the drawer closed as much. Same thing if you have a wall right next to the cabinet. Still well worth the help they provided.
George
2025-09-03 17:52:35
This is a very easy kreg set to use. The 2 clamps attached to the left and right side of the draw box then you close the draw in. Then the outside clamps the draw in place as you align it. Reopen the draw and screw te face on. Took all of 5 minutes to figure it out.One worthy note is you need at least 1/2 inch or so top cleaning for the clamps to slide in. Also it says tou need at least 1 3/4 inches high above the draw rails for it to close in as well. I didn't have to side height on the rail nut had clearance above my draw to shim the clamp 1/4 inch above the box. It works great.Saved me a lot of headache from my old method of installing the pull the drilling into the box. This was faster with better result.
Piotr Bis
2025-08-24 21:03:04
Good,helpful.
P.R Bilbo
2025-08-21 15:24:03
Works like a champ. Makes installing drawer front quick and easy.
Anthony B
2025-08-20 10:54:12
Makes things so much easier on me when doing assembly after refinishing.
Mike Cacuci
2025-08-12 17:42:54
Installation of drawer front is tricky but these make it much easier, only reason for knocking off a star is that the metal for the clamps is a little too flexible and if you tighten the clamps too much it can throw off your adjustment.
Insane
2025-08-11 10:28:13
Follow the simple instructions
Ms. George D. Schultz
2025-08-09 10:06:53
Well designed equipment by Kreg - good equipment helps a good project become exact and precise!
DIYer
2025-08-08 10:25:16
Works good.
Tyger
2025-08-02 16:52:08
Me gustarÃa que fuera más rigido en las esquinas, ya que al apretarla se va doblando, por lo demas bueno, aunque estaria bien colocarle topes laterales para que todas las tapas quedaran igual.
Reuß
2025-07-09 12:47:40
Ist ganz praktisch
Seb
2025-06-28 19:39:33
Excellent produit. Pas encore eu l'occasion de l'utiliser pour le moment.
Customer
2025-06-10 14:41:02
Works really well. A quality product you'd expect from Kreg. A bit pricey but worth the money.
G. Miller
2025-05-19 15:15:05
This has proven to be pretty darn handy for installing drawer fronts. I had about 100 to do in a new house, and it definitely made getting them aligned much easier. Recommended because it saves you time and frustration, which is a lot more valuable than the cost of the tool.Be aware, these do not not work ideally in every situation. Due to the thickness of the metal, sometimes there was not enough space between the drawer box and the cabinet opening to close the drawer (to get alignment really close). Also, if you have end-panels installed that extend-out past the drawer front, they'll interfere with this bracket (and you can't get the drawer closed as much. Same thing if you have a wall right next to the cabinet. Still well worth the help they provided.
George
2025-05-09 16:55:43
This is a very easy kreg set to use. The 2 clamps attached to the left and right side of the draw box then you close the draw in. Then the outside clamps the draw in place as you align it. Reopen the draw and screw te face on. Took all of 5 minutes to figure it out.One worthy note is you need at least 1/2 inch or so top cleaning for the clamps to slide in. Also it says tou need at least 1 3/4 inches high above the draw rails for it to close in as well. I didn't have to side height on the rail nut had clearance above my draw to shim the clamp 1/4 inch above the box. It works great.Saved me a lot of headache from my old method of installing the pull the drilling into the box. This was faster with better result.
Piotr Bis
2025-05-08 18:27:28
Good,helpful.
P.R Bilbo
2025-04-29 10:52:08
Works like a champ. Makes installing drawer front quick and easy.
Anthony B
2025-04-09 16:01:27
Makes things so much easier on me when doing assembly after refinishing.
Mike Cacuci
2025-03-20 18:54:48
Installation of drawer front is tricky but these make it much easier, only reason for knocking off a star is that the metal for the clamps is a little too flexible and if you tighten the clamps too much it can throw off your adjustment.
Insane
2025-03-05 13:27:06
Follow the simple instructions
Ms. George D. Schultz
2025-03-04 16:24:02
Well designed equipment by Kreg - good equipment helps a good project become exact and precise!
DIYer
2025-02-24 13:39:00
Works good.
Tyger
2025-02-10 10:05:24
Me gustarÃa que fuera más rigido en las esquinas, ya que al apretarla se va doblando, por lo demas bueno, aunque estaria bien colocarle topes laterales para que todas las tapas quedaran igual.
Reuß
2025-02-02 16:36:06
Ist ganz praktisch
Seb
2025-01-15 17:05:13
Excellent produit. Pas encore eu l'occasion de l'utiliser pour le moment.
Customer
2025-01-06 17:45:12
Works really well. A quality product you'd expect from Kreg. A bit pricey but worth the money.
Recommended Products
