Your cart is empty.
Your cart is empty.
10 Inch M42 HSS Bi-Metal Variable Pitch Hole Saw
★ 8% Cobalt, more durable and flexible
★ HSS for a longer using life
★ Variable tooth pitch for fast, smooth cutting
★ Chip hole makes plug removal easy
★ Ideal for home-improver and DIYer
Hole Saw Parameter:
☆ Cut Depth: 38mm
☆ Diameter: 10”(254mm)
☆ Wall Plate Width: 1.25mm
☆ Underside Panel Thickness: 6mm
Package Included:
1 * 10 in HSS Bi-Metal Variable Pitch Hole Saw
1 * #4341 Holesaw Arbor
1 * Hex Wrench
3 * Black Drill Bits
Randy O.
2025-09-05 17:02:37
I used this to bore thru 4 joists for a dryer pipe and it held up nicely. Just make sure that you use a powerful drill that has a 1/2 “ chuck.
Blake Baty
2025-06-24 15:38:51
Inexpensive quality product
Nick
2025-06-01 13:20:06
Not the sharpest hole saw around and I would definitely not use it on any metal at all. It did a pretty good job going through 3/4" plywood for making the holes I needed in some cornhole boards. It was way less expensive than the known brands and did the job. Bottom line: if you want to make holes in soft wood that are somewhere near 6" in diameter but don't need to be exactly 6", then this is a good and very inexpensive option.
Pancho
2025-04-22 09:59:18
I loved it , it was sharp , fast and easy to use ! It made a nice clean cut !
timothy ostman
2025-01-05 12:08:48
I have drilled 14 4 1/4 inch holes in 2 layers of Sheetrock and the teeth are still sharp. The package came with not only the Allen key to change out the pilot bit.. but it also came with 3 spare pilot bits as well. Spend 3 times as much and you only get the hole saw.. no arbor or extras.. and it lasts 5 holes
Sebastian
2024-12-08 17:56:45
Cuts holes. Sharp and study. OSB and flooring. Siding sofet fascia
JBeer
2024-12-01 16:43:02
I used this hole saw to install 6" speakers in my boat. It cut right through two layers of marine rug glued over 1/8" aluminum. I put the drill in reverse first to gently cut the outside rug layer. Then put it in forward and drilled through the two other layers. Worked great! I only cut two holes with it so I can't say how long it will last.
Andrew R. Yon
2024-11-22 13:54:37
The blade is pretty dull. I had a hard time cutting holes in 3/4" plywood. Also, the arbor on this thing is larger than the drill chuck on several of my drills. I tried to use a corded drill rather than my cordless and it won't fit. I tried using a Ryobi and Dewalt cordless - won't fit. It fits in my Craftsman cordless, but the blade is so dull I have to really force it to cut and it overheats the drill. I can get two holes cut before the battery is fully drained. It's cheap enough that I'll keep it as a backup, but I'm going to have to buy a better quality one for daily work.
Recommended Products
