Your cart is empty.
Your cart is empty.
Features:
3.2 inch color screen, support 65K color display, and the display is colorful 320X240 HD resolution, with touch function(optional) Using Serial Peripheral Interface serial bus, it only needs a few IO to lighten the display card cage for easy expansion of experiments Provides a rich sample program Military technology standard, long - term stable work Provide underlying driver technical support
Specification:
Size: 3.2 inch
Type: with touch function, no touch function (optional)
Driver chip: ILI9341
Resolution: 320*240 (Pixel)
Module interface: 4-wire SPI interface
Effective display area: 48.6x64.8(mm)
Module PCB plate size: 55.04x89.3(mm)
VCC power supply voltage: 3.3v ~5V
Logical IO port voltage: 3.3v (TTL)
The power consumption: Approx. 90mA
Weight: Approx.42g/1.5oz
Interface definition: serial number label Pin description 1 VCC power input(3.3V~5V) 2
GND
Power Ground
3 CS LCD Chip Selection 4 RESET LCD reset 5 DC LCD Bus command/data selection 6 (MOSI) LCD SPI Displays bus data input 7 SCK LCD SPI Displays bus clock 8 LED LCD Backlight control (high level lighting) 9 SDO(MISO) LCD SPI Displays bus data output 10 T_CLK Touch panel SPI bus clock 11 T_CS Touch panel SPI busChip Selection 12 T_DIN Touch panel SPI bus data input
13 T_DO Touch panel SPI bus data output 14 T_IRQ Touch panel interrupts IRQ
Package list:
1 x LCD Display Module
Sadiq Samani
2025-09-02 13:59:46
Update: 3V power has to be supplied to the display's power (VCC) AND backlight (LED). The following PINs had to be connected (first 8 PINs): VCC, GND, CS, RESET, D/C, SDI (MOSI), SCK, LEDI tried using it with multiple power/data sources that work with other TFT displays and it never turned on.
geo
2025-08-16 16:30:22
Great display. Unfortunately mine came with the touch screen attached and it was cracked at arival. Luckily easy to remove with hot air , care and a blade. Still rating 5 since I only needed the display. Cheers!
David
2025-08-10 14:25:48
This display does not properly respond to the LCD CS pin. This makes it impossible to share the SPI bus with another device and therefore it is useless for my project. Easy to test and prove: hard wire CS to Vcc and note that display still works. The display should ignore all SPI data when CS is high and only process SPI data when CS is low.
John R.
2025-08-07 12:21:25
I had a refund because it was broken.
Roger Bigras
2025-07-22 14:37:22
I"m not sure the display chip is the correct one, I can't get the examples for that chipset to work on this display screen.
Witchdoctor
2025-06-11 12:59:52
There was zero documentation with it and it did not seem to be in the LCDwiki website. I did find a youtube video where someone was setting one of these up and despite following the example to the Tee I was still unable to get the display to work. Would not recommend buying this.
Sadiq Samani
2025-05-31 18:10:26
Update: 3V power has to be supplied to the display's power (VCC) AND backlight (LED). The following PINs had to be connected (first 8 PINs): VCC, GND, CS, RESET, D/C, SDI (MOSI), SCK, LEDI tried using it with multiple power/data sources that work with other TFT displays and it never turned on.
geo
2025-05-27 18:43:31
Great display. Unfortunately mine came with the touch screen attached and it was cracked at arival. Luckily easy to remove with hot air , care and a blade. Still rating 5 since I only needed the display. Cheers!
David
2025-05-11 14:37:19
This display does not properly respond to the LCD CS pin. This makes it impossible to share the SPI bus with another device and therefore it is useless for my project. Easy to test and prove: hard wire CS to Vcc and note that display still works. The display should ignore all SPI data when CS is high and only process SPI data when CS is low.
John R.
2025-02-28 13:18:43
I had a refund because it was broken.
Roger Bigras
2025-02-23 10:50:15
I"m not sure the display chip is the correct one, I can't get the examples for that chipset to work on this display screen.
Witchdoctor
2025-02-15 17:26:18
There was zero documentation with it and it did not seem to be in the LCDwiki website. I did find a youtube video where someone was setting one of these up and despite following the example to the Tee I was still unable to get the display to work. Would not recommend buying this.
Recommended Products
