Your cart is empty.
Your cart is empty.The Decora Smart Z-Wave 700 Series Fan Speed Controller is designed for use with modern Z-Wave hubs and makes it easier than ever to add smart lighting control to your home. The ZW4SF Fan Speed Controller is compatible with any Z-Wave enabled network, regardless of the manufacturer, and can also be used with other devices displaying the Z-Wave logo. The ZW4SF acts as a repeater to help increase the reliability of the Z-Wave network. The Decora Smart Z-Wave Plus Fan Speed Controller aesthetically matches Decora in-wall devices and features intuitive on/off and 4-speed fan control with low, medium, high and maximum fan speeds. Add the fan speed controller to a certified Z-Wave hub to enable app commands, scheduling, and voice control of connected lighting.
TechHome
2025-06-14 10:41:12
I needed an outlet installed behind a new backlit mirror and wanted a high-quality option to control it. I'm really pleased with my decision to go with Leviton. I usually use Lutron Caséta for my smart switches, but since they don’t offer a smart wall outlet, this was the perfect solution. It works flawlessly to control the mirror’s backlight and was incredibly easy to pair with Z-Wave JS in Home Assistant.Leviton consistently produces high-quality products that I know I can trust. This outlet is UL-listed, ensuring safety—unlike many cheaper alternatives that compromise on materials and standard certifications. There’s a reason why some products are so inexpensive, and it often comes down to lower-quality components. I can confidently recommend Leviton’s Z-Wave products!This outlet features one smart-controlled receptacle that can be switched via your smart home system, while the other functions as a standard, always-on outlet. When installing, keep in mind that it’s a bit bulkier than a standard outlet and may require a deeper electrical box.
Brittani B.
2025-05-16 13:58:39
These Leviton Z-Wave Dimmers perform well and are one of the best Z-Wave options out there, especially if you want to integrate into a Vivint alarm system. We previously had Lutron Sunnata dimmers which we loved, but they didn’t integrate with our alarm panel so we decided to switch. The build quality is on par with the price (not as good as Lutron but better than Enbrighten/GE). Adding them to our Z-Wave compatible alarm panel was easy via the instructions and YES you can change Z-Wave parameters per dimmer (we turned off the green dimmer status indicator, changed ramp ON time to 1s, and set default value to full brightness vs last used level). Respond time is quick for the dimmer and installation in the electrical box is pretty easy. Some users complain about the new wire pigtails (vs terminal screws); coming from Lutron we were used to this so no complaints from me and the dimmer fits in “most†existing electrical boxes. We upgraded some 2- and 3-gang boxes to deep versions. Overall we are pleased with the Leviton dimmer (and switch) and would recommend it to anyone looking for a Z-Wave compatible dimmer.
Timothy K.
2025-05-03 13:36:06
I’ve gone through two GE JASCO fan controllers in just two years and decided to give this unit a try instead. It paired up to my Home Assistsnt instance without issue and extended well to my HomeLink bridge.I like the increased levels of fan speed and so far it works great with my setup. Hoping it lasts more than a year!
hillcountry
2025-04-18 11:38:40
The outlet failed to turn on after about 20 months of daily use. When it worked, it worked flawlessly.update: I did a factory reset and it started responding to the on-off switch and was able to be controlled by my Hubitat after it was registered to it. However, after it was removed from the hubitat it could not be added back. I am leaving it as 1 star because this happened. Additionally, when it was in the failed state it caused my entire z-wave network to be unstable (probably transmitting continuously). Since this is a wired-in device, fixing the network required removal of the ZW15R (I "fixed" it after it was removed). It is unlikely I will reinstall this device due to the damage to the network if it fails again when I am out of town.Second update:Leviton sent me a replacement. It was dead on arrival. There is a real problem with these. I have one working one installed, but because the failure can crash my z-wave network, I will be removing it and replacing it with a different device. Leviton is usually a good brand, but there is a significant design/QC problem with this outlet.third update:I returned both my original failed unit and the DOA replacement and told them I did not want a replacement since I do not trust them and would not install it. It was a $50 learning experience!4th update:The one remaining working outlet failed and could not be controlled via z-wave OR locally. Resetting the power (breaker off - on) returned it to operation. This is unacceptable!!! Three out of three failed. I will remove and discard this last one and go with plug-in devices like Minoston.
Customer
2025-04-04 10:58:42
I've used a few different Zwave Fan controllers for my house and this is now my go to device. I've used Jasco/GE Fan Controller (58433) and the Homeseer (HS-FC209+) which both failed in under a year. I have two of these and they have been running with no issues for approximately 2 years now. I also love having a separate speed control on the switch which makes it so much easier to control the speed then pressing and holding the up or down paddle.I have integrated this into SmartThings and into Home Assistant with no issues. I can use my SmartThings, Home Assistant, or Google/Alexa to control the fan and the speed without touching the switch.My only gripe with the switch is the inability to control the lights on the switch. I would love to be able to reassign the speed indicator, which lights up green, with notifications such as garage door left open or back door left unlocked (Homeseer allowed this to be programmed).With the limited Zwave fan controllers I would buy this again if I need another one.
Eric
2025-02-28 14:44:43
Works with smartthings. Nice looking Switch has a green led. Also comes with an almond faceplate so u can switch it out. Good Buy!
Logan Dunning
2025-02-18 10:22:55
Easy to install and join to a local hubonce it’s joined to the local pub it’s immediately picked up by Amazon AlexaThe on off button is tactile and responsivevery reliable and quick when issuing commandshighly recommend it
JULIO JACOME
2025-02-17 11:52:15
LO PUDE INSTALAR RAPIDO
Big Abe
2025-02-08 10:37:33
About all there is to say.
SAT
2025-01-17 15:25:19
Muy buen interruptor. Me gusto mucho sobre todo la posibilidad de cambiarlo de apagador cuando quieras y en donde necesites. Mucho mejor que tener un dimmer. Pense en comprar el enchufe de pared pero no me arrepiento en absoluto de este ya que lo puedo cambiar sin ningun ajuste solo lo desconecto y lo conecto en el nuevo enchufe y sigue funcionando. Queria comprar otro pero el precio subio al doble. Se enlaza muy facil al SmartthingsActualización. Con la app de Smartthings en Alexa lo puedes activar o desactivar con ordenes verbales
Richard Forster
2025-01-14 14:11:02
This is not a stand alone unit. You will be on the hook to buy another device to get this working. Just be sure you realize this before buying.
Recommended Products
