Your cart is empty.
Your cart is empty.Product Description
Tape
Tape & mask off around the area to be leafed to prevent unwanted overspray
Clean
Important !!! Be sure leafing area is smooth and clean of all debris
Glue
Apply 2-3 light coats of LiME LiNE Spray-able sizing glue evenly across the leafing surface
Apply
Apply leafing once the glue is tacky but does not string up to the touch
Spray the glue
- Apply 2-3 light coats of LiME LiNE Spray-able Leafing glue as directed with any airbrush
- Spray on thin and light not allowing the glue to puddle which creates an uneven texture that will transfer to the leaf
Lay the leaf
- LiME LiNE Glue has a 2-5 min dry time
- Apply leafing to the tacky glue surface
- Allow leaf to slightly overlap between sheets
Roll & Burnish
Use the LiME LiNE brush to:
- Remove excess material
- Burnish the leaf to an uniform appearance
Use the LiME LiNE Leaf Roller to:
- Roll leaf to make a solid contact with sizing glue
- Run roller across the border to make a cleaner edge once the tape in removed
No wait time! Leaf is ready for spinning
Spin (engine turn)
- Use LiME LiNE leaf spinner tool with the provided 3000 or 5000 grit sanding pads
- Spin the leaf using 1/4" inch turns
- For best results repeat a 30-40% overlap
No Wait Time!! leaf is ready for clearcoat
LiME LiNE makes automotive leafing easy
Fast, Easy and Effective Process
3-5 min dry time (when applied correctly)
Mark L.
2025-08-28 18:45:52
Nice leaf to work with , price & delivery are very good also.
Stacey F.
2025-08-18 12:39:15
Great product
deborah bergeson
2025-08-15 18:27:45
Adam from (lime line) timewarp customs tested a bunch of different supply companies leafs and this is the best out of all of them. It lays down great and it spins!! What more can you ask for?
Zak
2025-06-02 10:18:42
Take your time and it’ll turn out fine.
John
2025-03-25 13:43:49
Take your time be patient I learned wearing Rubber gloves that fit your hands careful not to get glue on the gloves. The product is awesome works well thank you lime line.
Justin turner
2025-03-03 14:39:32
I’ve had great success thanks to Limeline products and Adam’s TimeWarp YouTube channel that teaches us how to use them. My first try leafing was a success thank to his instructions.
Pinstriper
2025-02-27 11:22:57
I have done leafing/pinstriping for 32 years and had high hopes for this. Well, i have used much better leafing and the spin is not the finish i was hoping for. Going back to my usual stash
Vrs
2025-02-19 15:35:43
Tried the products for the first time and had great results! (Sorry for the reflections in the photos hard to see the finished product with this gold leaf but it turned out great)
Recommended Products