Your cart is empty.
Your cart is empty.This Logan Cos-Tools Straight/Bevel Cutter is simple to use - just rotate the angled base block to transform from a 90 degree straight cutter to a 45 degree bevel cutter. Features include adjustable blade depth, ergonomic handle and on-board blade storage. The cutter works on suitable Cosplay material up to an inch thick. A scrap foamboard underlayment is suggested for best results.
Diane M.
2025-08-31 12:14:47
I like the ability to switch from 90 deg to 45 deg, but it is very awkward lining the blade up with a straightedge and keeping a straight edge on the beveled cut. I’ve used it successfully doing mats for miniature artwork, but I went with a 30†mat cutting system with separate vertical and bevel cut blades that lock on the straightedge.
Territoo
2025-08-23 12:28:24
First of all this does not come with any instructions, but I was able to figure it out on my own. But I couldn't get a straight line because the bulk of the cutter blocked the line I had drawn. Also, to get the bevel correct, you have to cut from the front of the mat instead of drawing lines on the back. All in all, it gave a sloppy appearance that I wasn't willing to display. Maybe with more practice, but I didn't want to waste matboard on this cheap cutter.
Doug4.7
2025-06-03 13:35:05
First off, the unit I got was RED, not blue. Second, the design is missing an important part: a slot so their cutter will slide in the rail system they have. That's a stupid flaw that could have been fixed with a simple modification of the design.
Francesco
2025-05-27 12:25:42
Ottimo prodotto per cosplay, taglia molto bene mi serviva un attrezzo che doveva tagliare a 45 gradi, molto semplice da usare
CASAGRANDE ANDREA
2025-01-07 15:54:09
Ottimo prodotto
Recommended Products
