Your cart is empty.
Your cart is empty.Product Description
Customer
2025-09-06 15:30:54
It looks awesome and bolts right up however, tightening them down to torque spec, caused one of the bolts to snap. Now I'm afraid to torque the rest down. Recommend buying/finding better bolts!!!Edit. The company reached out to correct the bolt issue. Great customer service
Js.
2025-08-01 16:21:49
They spacer was perfect with the LS2 spacing water pump I used with my LQ9 truck spacing crank.I had to drill out one hole to make the bolts all line up with the block. One bolt would not thread easily until I drilled the top hole on the drivers side.
Curtis Figurel
2025-06-22 11:18:41
Water pump spacer ls. Nice product came as described easy to install and quick delivery thank you
Nick B
2025-06-07 13:13:24
LS swapping an 85 s10 blazer, needed to swap water pumps for throttle body clearance. These spacers plus a stock camaro water pump and problem solved
Jason
2025-04-24 15:38:37
Made well but steam port thread size is NOT SAE or Metric threads. I tried both 1/8th and various metric size threads and nothing would work. I ended up having to drill and tap the hole with a 1/8th NPT thread tap kit in order to get a 90° A/N #4 fitting to adapt to a hard line for my 4 corner LS cylinder head steam line return kit to work properly. Other than that, everything is good. Comes with appropriate length bolts that add 3/4 inch to bolt length to bolt the water pump and 3/4 spacers and belt tensioner to front of engine block. Single set of gaskets... both types, aluminum and cardboard are included but you will need a 2nd set if you wish to use 1 type for both block to spacer and spacer to water pump. I think the idea is to use the paper gaskets between the water pump and spacers and the aluminum gaskets with the impregnated poly rubber between the spacers and the block but without actual instructions included it is unknown exactly. It is annoying most products do not include instruction sheets these days but it is becoming the norm and searching online for instructions is typical these days.I hope this review helps others in their decision and best of luck with your projects/builds
Customer
2025-04-20 12:42:18
Not going to return it, the spacers themselves seem fine. However, the bolts are no good. Despite torquing to factory specs in two stages, 1st to 11 foot pounds then to 22; two of the bolts began to stretch, nearly snapping and ruining my whole situation. Not sure if I’m going to end up saving money over the name brand here.
Christopher Ence
2025-01-20 14:07:40
Good adapters made it fit right in
James D
2025-01-16 16:02:46
This worked perfectly for my LS swap build I’m running the truck style crank pulley and this helped line up my water pump perfectly
Annie Parent
2024-12-16 18:37:48
2 bolts snapped before the factory torque spec But the spacers fit right and i like the spot for a hose barb/sensor
Recommended Products