Your cart is empty.
Your cart is empty. Package Content : 1 x Cable Drag Chain; Material: Black Plastic
NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward.
Due to manual measurement, and production, the batch is not the same, size, weight, color, there will be a certain error, error within 2% of the normal situation.
SOMETHING ABOUT US- Luomorgo have the customers satisfaction for their first priority. If you have any questions,please feel free to contact us by mail FIRST.we will offer our best service for you.
Making Stuff
2025-08-05 15:42:50
Good quality! I like how the tabs can be removed so cables can be added without having to fish them thru the chain like a piece of pipe. Works great with my CNC plasma.
Chris
2025-05-25 13:55:00
They work, but as stated in other reviews, the tabs are very brittle an likely to break. So knowing this before buying, I just fished the cables thru instead of opening the sections up. other than that, so far they have worked smoothly
Scott Hart
2025-04-22 18:01:11
I used two of these to make my main drag chain for my CNC router. If you use a screw driver to remove the cross braces as it shows, they will break. It is better to use a pair of pliers and just twist them off. They will then easily snap back in with just your hands.
Customer
2025-03-03 18:39:40
Don't buy these, can't even take 1 clip off without breaking them. I've had these out of the box for 5 minutes and threw them all away.
Shane Holland
2025-01-24 17:46:15
Nice chain. Ordered 4. One came in broken. Amazon sent me another right away.
Jeremy Fielding
2025-01-12 10:28:22
After about 5 months of use it has broken in several places. The clips that hold the sections closed are especially prone to breaking. So many have fallen out I am going to replace the whole thing with a different cable carrier.
Wesley lowman
2025-01-10 19:12:16
I haven’t used it yet, but seems great
B. Allen
2024-12-13 17:50:06
I'm satisfied with these in the end and they work great for my large CNC machine.The reason for the 4 star rating is that the little screwdriver icon makes it looks like you press down / pry on the tabs to remove the crossbars to lay in the cables, which results in the brittle tabs breaking off.I figured out that the best way to get them off is to put a crescent wrench in the middle of the crossbar, adjusted tight, then use the crescent wrench to lift one side (not one end) of the crossbar without pressing down on the other side. In other words don't rotate the crossbar in place, lift one side off the tabs (both tabs at the same time). This saved my hands when removing 2 meters worth of crossbars and only about 1 in 10 of the crossbars sustains minor damage.I have no idea what the little screwdriver icon is for. I see no way of prying it off with a screwdriver without doing damage to the tabs and breaking many of them off (which I see many people online saying is what happened to them, and what happened to me until I figured this out).
Recommended Products
