Your cart is empty.
Your cart is empty.Product Description
With double-sided cooling ,Aluminum alloy material, this M.2 heatsink greatly increase the heat dissipation, with 10°C - 30°C cooling effect , which make sure your new M.2 SSD in a safe temp, avoiding overheating and throttling, improving the performance of your computer.
Features:
Designed for desktop computers;
Aluminum body, Anodic Oxidation Surface Treatment;
with 10°C - 30°C cooling effect;
Compatible with Singel/Double sided M.2 NVME NGFF SSD;
Easy to install, and not damage the hard disk.
Apply to PCIe NVMe M.2 SSD models(Partial list):
Samsung 950Pro/ 960Evo/ PM951/ PM961/ SM951/ SM961/970 EVO /970 PRO etc;
Intel Optane SSD 800P Series, Intel SSD 760p Series, Intel SSD 660p Series, Intel SSD 600p Series;
Kingston: SM2280S3G2 / RBU-SNS8152S3 / KC1000;WD: WD M.2 / WD Blue M.2 / WD Black M.2 SN 850
Plextor: M6GV / M7VG / M8PeGN / M8SeGN; SanDisk: X300 / X300S / X400 / Z400S / X110 / A400Transcend: MTS800 / MTS820;
ADATA: SP550 / ASX7000NP / XPG-SX6000 / XPG-SX8000 / XPG GAMMIX S10 / SU800 / AXNS381E;
Toshiba: Q200 / XG3 / XG4 / OCZ RD400 / THNSNK / OCZ: RD400;
Crucial / Micron: MX200 / MX300 / M510 / M600 / 1100;
Play Station 5 Upgrade with M.2 NVME/NGFF SSD
- With double-sided clip design, 6 adjustable height screws, and 2 spare screws are suitable for M.2 NVME SSD of various heights, stable installation, better protection of your M.2 SSD with good heat dissipation performance.
- Made from Nano Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the M.2 SSD.
- Aluminum alloy, silver plating , anodic oxidation surface treatment; Greatly increase the heat dissipation area of M.2
N. Wong
2025-09-06 15:31:35
The kit come with everything you need. A mini screwdriver and even screw for the SSD installation. Installation took me 2 minutes, easy and quick. This cold down the SSD as expected. Highly recommend for the price.
Petrolhead
2025-07-02 15:22:59
I bought this to use with a 2TB Team Group M.2 SSD. Little did I know, but those SSDs die due to heat. This heatsink installed easily. No need to overthink the lining up of the silicone pads. Just peel off the plastic protection and position them on the SSD. The silicone is somewhat adhesive, but not sticky. It can be repositioned easily. Anyway, the temperature of the SSD held steady even when copying to it at 1-2 GIGABYTES per second. I recommend this heatsink and may pick up another one for the other SSD in my system.
Donald Dougherty
2025-03-16 16:59:48
paired with crucial p3 plus. works great. unsure if it actually helps much. but looks better than standard m.2
CMDiazJr
2025-02-05 17:46:37
These seem high quality but too large for some installations and I'm not sure they do much additional cooling. I had to shave down the corner of one to make it fit a tight spot. And, they add strength to flimsy M.2 cards, like they're in a little suit of armor.
perry
2025-02-03 11:17:20
Super easy to install and lowered temps on a 1TB Samsung M.2 NVME by 5C. This is in a system with an overclocked 9900k + 3080ti so it creates massive heat. I'd imagine it'll lower by a bit more if installed in a system with lower tdp components.
JeffCD
2025-01-14 18:00:21
This is smaller than I was expecting, but it reduced the temps on my 970 Plus 1TB drive significantly. The controller went from reporting 80c+ to a max of around 55c. I did not remove the drive label, Samsung claims that it is a thermally conductive label. I did see a couple spots on the back of the bracket that were within touching distance of electrical hot spots on my motherboard. It might not have touched, but a little kapton tape in those areas will prevent shorting if they do touch.
Cristhian
2025-01-11 18:53:58
Cumple con su función, instalación facil
Wally Wen
2024-12-22 13:45:07
Bought this to match with Crucial P5+ 2TB. Comes with screws and double side tapes. Fit perfectly to my PS5. Installation takes less than 10 minutes
Recommended Products
$6.99
$ 3 .99 $3.99