Your cart is empty.
Your cart is empty.M. 2 NVME SSD mounting screws for MSI motherboards Hex head jackscrews Flat Head screws Screwdriver Included Value Pack - Set of 8
Promar
2025-08-01 11:20:55
Easy to install and used for both my samsung m.2 ssds. Good price and has lasted me a year now. Would recommend.
Scott
2025-07-26 18:38:25
I thought I was buying 8 risers and screws of the same size. Instead it was 4 and 4 which turned out to be what I really needed for my project.Great product for the price!
Customer
2025-07-10 18:54:16
I recently bought an additional SSD, only to discover my MSI Motherboard was missing the SSD Standoffs.I reached out to MSI and they suggested this set from Amazon.This worked great for me. Comes with 2 sizes of standoffs (the short ones fit in my case) and I had the new SSD installed 5-minutes later.
AP
2025-06-02 16:43:18
Keep in mind that there are two sets of different sizes and standoffs. Make sure to match them correctly. The set included a slightly magnetized screwdriver, making the installation easier. Overall, everything fit and worked out fine. I would love to see the magnetized tip a little stronger, but this can be adjusted with your magnetizer. A few times, my trembling hands dropped the screw onto the motherboard, but I was able to easily fish it out with the magnetized tip.
Customer
2025-05-28 12:26:48
Bought an MSI B450 Tomahawk (non MAX) second hand and it didn't come with any m.2 mounting hardware. The larger thread standoffs and screws fit perfectly. Just for fun I also checked to see if it would work on my old msi b250m gaming pro and they do.Pros:- Quality machining and materials (all threads are nice and smooth, no imperfections anywhere)- Fit msi motherboards (or atleast the 2 I have)- Comes with magnetic screwdriver- Price (I mean, for 8 screws, 8 standoffs and a magnetic screwdriver I feel like it could be cheaper... but compared to the price of everything else in my build it was literally the cheapest thing I've purchased for it haha)Cons:- Screwdriver is a bit too small (fits very loose in the head of the larger screws, may cause them to strip but you really dont need to be cranking them down) and the magnet is not very strong. That being said though it definitely is enough to get the job done and a nice bonus that it's included.- Would have been nice to see an adapter included for installing the standoffs. (I used the one included with my case for the motherboard standoffs)- Nit picking here, but the smaller diameter standoffs and screws do not match in color or finish. The standoffs are darker and less shiny compared to the screws. Really a non issue but if you're super ocd.... (like me). Luckily I didn't need to use them, just the larger size which do match.
J. Vannoy
2025-04-28 14:41:43
I have an MSI board with two M.2 ports but it was missing one of the standoffs. I was able to determine that the threads on the board are standard metric M3, and one of the two sizes included in this set fits it. The standoff is the correct 6mm length as well.FYI you can make a (temporary or permanent) standoff for these boards pretty easily. All you need are an 8mm long M3 screw and a 6mm length of 3/16 inch diameter styrene tubing. Just put the screw though the tube, let the notch in the SSD slide in between the screw head and the styrene tube, and thread it into the hole in the motherboard.
James Avila
2025-04-17 12:08:29
Came with two different types of screws to use I needed the thicker ones
Justin
2025-03-11 14:15:40
Bought a pre-built using this board from a system integrator and the forgot the spacer and screw for the 2nd SSD slot. This kit did the trick, only thing of note is that I used my own tools for the installation instead of the included screwdriver so I can't speak on its quality.
antonio
2025-02-16 12:40:42
llego en excelentes condiciones y tornillos muy buenos, instale sin problema la memoria ssd.m2 a mi cpu.
Recommended Products
