Your cart is empty.
Your cart is empty.Product Description
Fusion Cool 2240
Low Odor, Semi-Synthetic Concentrated Coolant
This fluid is ideal for band sawing, grinding, drilling, milling, reaming, roll threading, tapping, thread forming, and many other machining applications.
An Excellent Lubricity Package to Extend Tool Life
Metalworking fluids are critical to maintaining efficient performance across operations. The lubricity will prevent chips from welding, especially for high-speed milling and turning operations.
General Purpose Coolant for Cutting and Grinding Machine Shop Operations
- Versatile - used in a variety of applications
- Excellent Corrosion Protection
- Safe and Mild
- Long Sump Life- Biostatic
- Good Lubricity
- Cleanliness
Black Swamp.
2025-08-03 19:52:27
I was sceptical at first. But it proved to be way better than expected.I mixed this at 7%. My intended use is on a mill and lathe machine. How ever my first use was on my metal cutting band saw. This performed extremely well. I was cutting 11ga steel 1"x1" square tube at a 45° the coolant kept the blade cool enough that there was little to no vapor from the cut. Previously I had been using WD40 it didn't do nearly as well. The WD40 would smoke and didn't cool nearly as well. The cutting with the WD40 would make a metal fragment past and a mess. The coolant kept things clean and the cut clear. The WD40 didn't allow the cutting to fall free and traveled with the band and would build up in the cut. The cut quilty is really nice. I would say that it is better than the WD40.The $40.00 dollar price per gallon up front seems to be a bit high. Seeing as how it is a consecrate you will get roughly 10 gallons of solution for your purchase price. That makes it around $4.00 per gallon.For this first time use I used a hand held pump sprayer, purchased these at Sam's Club. Worked perfectly. I plan on useing this in a flood cooling system sometime in the future. Should work extremely well. If it works with a hand sprayer it will be even better with the flood cooling system.I would recommend this to anyone who is doing any sort of metal work. Drilling, sawing, milling and lathe turning.
J. D.
2025-07-02 17:11:55
I was machining brass parts from 360 bar stock dry with a quality sandvik tool and inserts. I was getting variations in the finish. After checking everything I could think of I decided to try this product as a flood coolant / cutting fluid. My surface finish is fantastic now! The image is of 3/4†stock parted with the sandvik tool and no post processing aside from rinsing with water.
Paul G
2025-07-01 12:16:35
Cut inside lubricant for drilling or sign seems to work just dandy everything stays cool haven't used it very much but plan to in the future
Customer
2025-05-28 14:01:19
This cutting fluid works very well for lubricity and as a coolant, just like it should. The added factor is this product is a concentrate! It makes a whole lot of cutting fluid. It is unlikely that you will need another gallon anytime soon. A better value than I thought.
Libby Fenner
2025-03-29 15:52:04
Use for cnc on aluminum, bits last longer
Daniel
2025-01-16 12:00:40
Good all purpose coolant.
Andrew lorenz
2025-01-15 15:34:15
Good fluid and lubrication. Doesn’t smell too weird.
Ervin
2024-12-19 12:41:45
Yo, cool stuff off
Recommended Products
$259.35
$ 99 .00 $99.00