Your cart is empty.
Your cart is empty.Product Description
1 spool option
2 spool option
3 spool option
4 spool option
5 spool option
6 spool option
Clamp
2025-08-26 17:46:48
I have a 1957 Ford with a FE loader. The original valve needed replacement, and most tractor replacements are many hundreds of dollars. This matched the specs of the original (close enough) and with some custom hoses made at the local shop the hydraulics now work great.
J Montagne
2025-07-21 11:18:53
I bought this to add a third hydraulic function on my John Deere 2305. I connected it to the rear remotes (where backhoe connects) to control either a hydraulic top link on the 3ph or a grapple on the loader. It didn't come with directions, I contacted the vendor to confirm the port configuration. The vendor emailed me a copy of the directions which were difficult to read due to poor translation into English. All in all, I like valve. My one recommendation is for the vendor to create an installation guide in English with a complete description of the ports and pressure relief adjustment.
Bobby P.
2025-07-12 11:28:29
Looks like a well made unit. Haven't installed it yet. Looks to be good quality.
Jon h
2025-06-22 17:38:01
It works as its designed. Seems to be a good valve. All the ports on it are "o" ring fittings, the 2 workports and the feed/in are 1/2" size and the out- reture is 3/4" if that helps anyone.
Spike
2025-05-28 17:20:58
I bought this valve to angle a snowplow I made for the 3 point hitch of my tractor. It made it through the winter with no issues. Will buy again if the need arises
Tiras Glasgow
2025-05-10 14:28:18
The directional leaver was stuck, would not let the cylinder work. After taking it apart & freeing shaft on inside and putting back together, it works great. Had I not been familiar with how hydraulic valves work would not have been able to figure it out, how to plumb it, there were no instructions whatsoever.
Sue
2025-03-11 16:43:33
My husband has a very old tractor, one he refuses to replace! The hydraulics were slow to react and finally quit all together. I was surprised the valve was on Amazon, ordered it, and it corrected our problem. Yes, we would purchase from this company again, great product!
Dean Palmer
2025-02-14 18:15:40
It is working great after about 2 hrs to take take the old one off and install this. It allows my 3 point hitch to works as well. I used the old levers as they were bent towards the user and the new ones were straight
mel kightley
2025-02-09 17:36:35
The valve worked very good no problems god buy. I used the valve on a new power cell to run a rotary drive wheel FOR AND REV and linear feed system for forward and rev all works better than i expected
Recommended Products
$99.75
$ 46 .99 $46.99