Your cart is empty.
Your cart is empty.Product Description
2 coil Magneto Stator Plate
Fit Models & Wire indication:
- This product is a wiring harness designed for 4-stroke dirt bike pit bikes, ATV quads, and go karts with engine sizes of 50cc, 70cc, 90cc, 110cc, and 125cc. It is compatible with a variety of brands including TaoTao, Buyang, Roketa, Coolsport, NST, BMX, Kazuma, Sunl, AIM-EX, Baja, Panterra, Kymco, Carroll Stream, and Eagle.
- Installation is made easy with wire indications clearly marked on the harness.
Green wire：connects to the ground in the main harness or frame, or both.
Blue wire with white： connects the pickup unit to the CDI unit.
Black wire with white： connects the CDI unit to the exciter/primary coil.
Red wire with black： connects to the regulator/rectifier to charge the battery.
Yellow wire： connects to the regulator/rectifier to run the AC voltage headlight.
Top-quality materials & Effortless to install
Maximum power and performance with its full copper coils and enameled wire.
Aluminum plate disc and high-density material help to prevent damage and ensure long-lasting durability.
Comes with 2 coil and 6 wires (red,yellow,white,blue/white,red/green,white/green.)
(including 1 removable free wire)
Size
- Plate Bolt Hole Eye-Eye -- 101 mm/ 3.98 inch
- Plate Diameter -- 115 mm /4.52 inch
- Central Oil Seal Diameter -- 18 mm/ 0.7 inch
- Plate Bolt Hole Diameter -- 7 mm/ 0.28 inch
Tips：
- This is a non-original aftermarket part, Please check the pictures and size carefully before purchasing to ensure it will fit your machine.
- Due to lighting and monitor differences, there may be some chromatic aberration, so please understand.
- Manual measurement may result in 1-2 mm errors, so please be aware of that.
Willow
2025-08-21 14:35:03
I got this stator on sale for a very good price and it worked great.
MaksWerks
2025-07-20 13:51:25
Installed this in a '18 Genuine Buddy 125 that had a fried crank position sensor. Bolted in and worked without issue.
J. Johnson
2025-07-16 18:55:29
Works like it should AFTER you move two wires on the 4 pin connector. The yellow and white wires needed to be shifted to different positions. Saved a lot of money compared to the other recommended alternative
Jeff W
2025-06-01 12:00:56
I used this stator on a 2003 XR80R just used the black and blue wiresbolted right up and works great. I think you could add a voltage regulatorand have power to add lights if you wonted to.
Paul Gibson/Ed
2025-05-01 10:19:18
I bought two of them one didn't work and one did work
Tom
2025-03-29 13:49:24
The coil was good, the pick up didn't time my Kasea Skyhawk properly. I had to transfer the old pickup
joel mcneil
2025-01-06 18:15:02
Worked well used on a Tao Tao gk110 go kart
The Beetle
2024-12-21 14:42:24
This works as it should - very inexpensive to get your bike the spark it needs!
Recommended Products
$42.00
$ 19 .99 $19.99
$45.99
$ 19 .99 $19.99
$139.98
$ 60 .99 $60.99