Your cart is empty.
Your cart is empty.Product Description
Tony Mosley
2025-07-28 19:38:12
Fast shipping and good quality works great
Tyler Shattuck
2025-06-29 16:10:07
Bought the part after Amazon confirmed that it would fit my vehicle, and the part does not even come close to fitting. Don't trust Amazon, just go to your local auto parts store
Bman
2025-05-20 17:03:58
The island seem to work very well
Huberto arias-Cruz
2025-05-08 14:41:36
Works as described.. just need to use different O ring
Clayton
2025-04-23 16:08:02
Disclaimer: I gave this 5/5 because I have nothing to say that it doesn't work, but I also have nothing to say that it does work either.Was experiencing rough idle, difficulties starting, and some stall outs periodically on my 2000 Buick LeSabre, and unfortunately there is a laundry list of items that can cause these symptoms. Based on some quick forum research and a handful of YouTube videos, I first replaced the EVAP purge valve with slight improvement to the starting issues but still had rough idle and stall outs.After checking out a few sensors on the car and having the OEM MAP sensor fall apart in my hand, I was hopeful that this was probably the issue. I replace the OEM with this sensor and drove for a few days without much change for the better. After those, I - unrelatedly - replaced the upper & lower intake manifold gaskets as well as the valve cover gaskets which also didn't do anything to aid in this issue. I finally replaced the MAF sensor which seems driving for a couple weeks to let the computer adjust to the new sensor seems to have fixed the problem. As far as install goes, this was a direct replacement for the OEM. I put a little bit of silicone grease on the rubber gasket and it easily went into place. Its a bit looser in the holder than what I would like, but that could also be due to the age of the plenum which the holder is built into.
PAULO SANTOS
2025-01-27 12:36:10
FALSELY ADVERTISED STAY AWAY DOESN'T FIT 02 DODGE DURANGO IT SUCKED DIDN'T FIT DISPITE SAYING IT DOES THE PLUG AREA SO BIG IT BROKE THE CONNECTOR PART COST ME EVEN MORE MONEY
Dan
2024-11-27 18:54:55
The part fit well, but it didn't work with the Dodge. I ended up going and getting a mopar you in it just to be safe
Recommended Products