Your cart is empty.
Your cart is empty.This INSERT BEARING has a Spherical Surface. Two Metal Shields to Protect the Bearing from Dust or any Possible Contamination. Bearing is Pre-Lubricated with High-Quality Grease ideal for use in High and Low-temperature settings. Have Oil Hole to Relubricate. Has Eccentric Locking Collar (Self-Locking Collar). - Specification: Item 741-0309, 941-0309, 741-0310, 941-0310, Outside Surface Shape Spherical, Inner Diameter Metric 19.05 mm, Inner Diameter Inch 3/4 in, Outside Diameter Matric 47.00 mm, Outside Diameter Inch 1.850 in, Width with Collar Matric 31 mm, Width with Collar Inch 1.22 in, Width Inner Ring Matric 21.40 mm, Width Inner Ring Inch 0.843 in, Width Outer Ring Matric 14.00 mm, Width Outer Ring Inch 0.551 in, Dynamic Load Rating Cr 12700 N, Static Load Rating Cor 6550 N, Limiting Speed 8500 r/min, Clearance Normal Closures Two Metal Shields (ZZ), Lubrication Type Grease Shell RL2, Lubrication Temperature -20°C to +160°C, Rolling Element Indicator Ball, Material Gcr15, Locking Type Eccentric Locking Collar, Product Weight 0.180 KG.
Andrew Kopchak
2025-09-06 16:18:21
Good product at a good price
Tom B.
2025-07-14 21:41:11
worked fine
Bill
2025-06-23 15:24:56
I needed to replace this main impeller shaft bearing on my 30†Craftsman (MTD) snowblower during a rebuild where I replaced the auger housing. My setup does not use the shaft collar, so I was a little worried it might not come off easily - but the collar is not attached to the bearing so is easily removable.The bearing is fine, especially for the price. I’m dinging it one star cuz it could have been packed with more grease, and given how much you need to disassemble to get at the bearing, it would have been better if it had more grease in it. On the other hand, with global warming, who knows how much use this bearing will get?!??
Steve
2025-06-14 17:20:26
Fit perfect. No problem
TR
2025-06-05 18:17:08
PERFECT FIT
Mike
2025-05-17 17:45:49
Bought it for a 2002 MTD Yard Machines 8hp snow blower [644E series].It is the correct bearing but it looks off and there is too much axial play when on the shaft.I expect some (this does not press fit) but for a new bearing I don't like it. I did not check it for roundness. No accurate measurement tools.I thought this was a Canadian made bearing. Its not. According to the box it was designed in Canada but made in P.R.C. I would rather it be designed in China and manufactured elsewhere. Its hit or miss with Chinese made bearings. The Chinese bearings I installed on my lawn tractor lasted one month.
Sentinel
2025-05-16 17:11:17
For my Troy Built snow blower, the locking collar was not used. It adds aprox 1/2" to bearing stack hieght and would then not fit. The bearing is a press fit with a retaining bracket so it can't move after installation.The instructions / information should explain this. The fit is the same as the original part. Installation was fairly simple.No more grinding or shaking when running.
DONNA WETTLAUFER
2025-04-06 18:00:18
Great product
Customer
2025-03-17 15:18:10
It fits like it's supposed to. You don't need the locking collar, so through the locking collar away. There is no room for it anyway.
Andy Girling
2025-02-17 18:55:08
Perfect fit
Francois
2025-01-23 12:30:39
Parfait
daniel cote
2025-01-11 17:06:05
satisfait du produit et livraison rapide!
Recommended Products
