Your cart is empty.
Your cart is empty.Product Description
MAXPOWER Breaker Bar
MAXPOWER Breaker Bars
MAXPOWER owns a national-level technology center and internationally - recognized certificated laboratory in the hardware tools industry. It is also a unit champion in Chinas manufacturing industry and a member of the China Hardware Standards Committee. And our products have been sold to more than 80 counrties and regions.
We are focused on the performance, service life, and ergonomics of its tools in order to meet the high expectations of professional users.
MAXPOWER Tool
24 inch Breaker Bar 3/4 Drive and 1/2 Drive
Made of forged and hardened chrome vanadium steel construction, which provides superior strength and durability.
With our flex handle in three different types, you always get the extra leverage you need to break loose frozen and stuck nuts and bolts.
- 3/4-inch drive head delivers up to 1412N.m(1041 lb.ft) of torque
- 1/2-inch drive head delivers up to 512N.m(378lb.ft) of torque
- Spring loaded ball bearing ensures sockets are securely held
Dual Drive 3/4 inch and 1/2 inch
360 degree Flexible Drive
Spring-Loaded ball bearing to secure loaded sockets on wrench
Non-slip Knurled Grip
Smoothly contoured, round profile handle for a comfortable grip
MAXPOWER Breaker Bars Various Size
softball#18
2025-09-03 10:15:21
This bar is more than just a bar it's the leverage you need, works for me every time,more than the value
wilfido r.
2025-08-21 12:18:23
T ace aser tu trabajo mas facil a la hora d remover cualquier tornillo
Juan Martinez
2025-08-08 13:02:15
It was what expected
Paul C.
2025-08-06 16:56:03
Ball bearing to hold socket on is a little weak, socket tends to fall off
della
2025-06-11 16:29:57
Last value for a good quality with weight and sized to Ease to remove hard to reach areas of performance
Dan Gottron
2025-05-18 16:26:32
I was working on a pulled engine out of a VW 95 camper and very difficult to get to some of the screws out of the transmission mount because of other parts giving very little leeway between the head of the screw and another piece of metal. These swivel head mounts with leverage breaker bars worked on all nuts almost immediately. Even the hex ones!I got the 24-in just in case but didn't find it necessary. The 18 worked just as well for these spaces on the engine. I'd recommend the 24-in for bolts larger M18/19 and above or really trusty with rust. Regardless remember to use lots of WD-40 before you use anything. Good luck with your project !
NightOwl
2025-04-06 09:43:58
Nice breaker bar. I love the length, price point and the 1/2 or 3/8-inch drive versatility. It is much easier to change a flat tire on your car with this than using a 4-way lug wrench. ðŸ‘
Cameron and Erin Harvey
2025-02-26 13:02:40
Broke with hardly any leverage
Diego
2025-02-02 13:18:54
Esta es una de esas herramientas que una vez la pruebas, se vuelve indispensable.Nunca habia tenido una barra de rotura. Siempre habÃa cogido una llave inglesa o fija y con la ayuda de un tubo, habÃa hecho de palanca. Un diá compré esta herramienta por probar a ver que tal y me ha sorprendido muchÃsimo.Se hace mucho más cómoda de usar que el sistema tradicional. Además gracias a la articulación (la cual se ve bastante fuerte) puedes conseguir llegar a muchos más sitios. Combinándola con los vasos de cualquier estuche de llave de carraca no hay tornillo que se te resista.Yo ya la he usado para hacer varias reparaciones en coches viejos (con sus tornllos y tuercas oxidadas) y la barra está como el primer dÃa, a pesar de que le he dado caña.Como he dicho al principio, no sabes lo mucho que te hace falta hasta que la pruebas.
Tom Mirayias
2025-01-26 12:36:56
Used to replace a seized wheel bearing.. I think says it all. At the beginning I thought it would not handle all that pressure but it worked perfectly for me.. I even used a pipe as an extension to tighten my car’s axle bolt.I hope the quality is consistent.
jtn
2025-01-25 17:38:24
Utilisé pour démonter les disques de frein arrière de ma voiture, la longueur permet d'avoir un bon bras de levier et donc la force suffisante pour desserrer. La prise en main est basique, mais c'est pas le genre d'outil qu'on utilise tous les jours !
Tobi_Be
2024-12-24 10:25:05
Hält, was es verspricht. Trotz meinem Schlagschrauber mit 400Nm habe ich die eine oder andere Schraube nicht aufbekommen. Dieser Hebel Knackt die schwersten Schrauben und Muttern (Nur PKW getestet).
Kaan T.
2024-12-08 13:04:46
Inanilmaz saglam bir parca, atilyelerin vazgecilmezi olabilir
Recommended Products