Your cart is empty.
Your cart is empty.Product Description
Application:
The dots are small dots inlaid on the guitar fretboard for the convenience of identifying the different frets. Many guitars have dots marked on the side of the neck in addition to the dots on the fretboard. It is beneficial for guitar beginners to better practice the guitar.
Something else you need to know
Advantages:
Durable and strong acrylic/wooden material, commonly used dots are marked for easy identification of different frets when playing.
How to use it?
Take out the old or damaged fretboard round dot, replace the new one you received, and inlay it.
Tips:
Please confirm whether its diameter and thickness match your guitar fretboard before ordering.
Russell Davis
2025-05-21 19:00:09
I don't care for these. The seem to be clear with a fan of white on one end. If you manage to drill the inlay hole to the perfect depth, I suppose they will work just fine BUT if you have one that sits proud of your fretboard, you don't have much that you can sand off without losing the color.Diameter seems fairly consistent, height might vary by a little bit tho.I won't be buying these again.
Victoria
2025-02-10 09:21:43
The description for the item says these inlay dots are 6.3 mm. The standard holes in a guitar fretboard are tipically drilled either with a imperial 1/4'' bit (6.35 mm) or with a metric 6 mm bit.The holes on my guitar are 6.35 mm so I thought these inlays would work well enough.That's not the case because they are too small to fit a 6.35 hole, they measure 6.1 mm (see photo attached).Whoever is around guitar and guitar repairs knows that the inlays need to be a perfect fit and even a 0.2 mm difference is too much.
John Robinson
2024-11-30 14:35:28
Perfect
Recommended Products
$26.67
$ 12 .99 $12.99