Your cart is empty.
Your cart is empty.The 115003M Phillips #2 magnetic driver bit features a patented magnetic collar design, strong fastener holding power, Black Oxide finish for added corrosion resistance and a 1/4 in. Quick-change impact ready shaft. Patented magnetic collar design. Strong fastener holding power. Manufactured with high quality S2 steel. Black oxide finish for added corrosion resistance.
wadie
2025-09-05 13:03:33
Solid magnet. It moves up and down the bit shaft ever so slightly to accommodate different screw heads. Used daily for weeks and still going strong with first bit. Magnet will pick up metal shavings if you’re using self tappers through metal.
Gary Riding
2025-08-21 14:09:38
I'm constantly buying these bits, I'm a drywall contractor and these workout really well in my drill, not for heavy duty stuff but for minor stuff these work out really good
epeltz
2025-07-13 14:37:37
Not sure why another poster said these are not magnetic - they come with a magnetic collar that is quite strong. If your use case allows you to use a bit with a collar, then these should work well for you. I would say they work for about 80%-90% of the things I need them for. If I need a regular bit (with no collar), then swap them out.I have owned the Hitachi version and the newer Metabo version. They are the same product, no difference at all. Over time, the collars have a tendency to fall off and the tip does feel a bit softer than some other products, so these may not be the right choice if you are a contractor and need to use them with hundreds or thousands of screws per day. For the consumer/prosumer whose primary need is a home shop or "regular" duty, these work great. Since they have a collar, they are not great for tight spaces, but I have other products to take care of that use case.
Justin D Ozone
2025-06-24 16:20:23
I have used magnetic capture bits from all the usual sources over the past 30 years and these are by far the best of breed. I purchased a pair of square drive and a pair of #2 Philips drive to try and because of their outstanding performance have since reordered quantities of both. Since my original purchase I have built two decks. One 12'x26' using over 1,200 stainless steel Philips screws and another 10'x20' requiring about 700 coated square drive fasteners. These bits worked flawlessly and in both cases I only had to use a single bit that still has a lot of service left in it. Cam outs occurred infrequently, only at extreme angles, and resulted in no bit damage or reamed fasteners. The screws almost seem to jump into place on the bit and I never had one fall off the bit or become misaligned. The powerful magnet and the well designed collar work together to center the screw-head on the bit and keep it there without any play/wobble when you start to drive the screw. I have a sheetrock project this weekend and expect to have many instances where I'm holding the drywall in place with one hand while trying to drive a screw with the other. I expect these bits to be a real time and frustration saver.
Lori and Vince
2025-06-08 11:08:35
They hold screws really nicely. Magnet works great to retain the screw. I have tried others, but like these the best.
Remmy Cornelius
2025-06-05 11:20:42
Using for framing you will damage it so fast.
stan
2025-05-06 19:42:20
Finally, a magnetic bit that really works!
Justin Brought
2025-04-25 16:46:41
This is by FAR, the best driver bit I have ever used!!!For those bad reviews saying it drives the screw too far, it does. But a little bit of skill will stop that.I am using 3†drywall screws driving thru 1/2†drywall, plaster and lathe, then driving into 120 year old studs. Regular Dewalt drivers will not run these screws without major stress. This one holds and bites the screws flawlessly.Thank you for making such a great product!!
Paul Charron
2025-04-18 16:45:07
Very good and strong ðŸ‘ðŸ‘
Trung nguyen
2025-03-22 19:26:48
Very good screw bit, like it
Josue López
2025-03-07 09:27:47
Buen agarre y excelente material
gcamarena
2025-02-20 18:03:40
EN UN PAR DE DIAS SE DESPRENDIERON LOS AROS DE ALUMINIO, NO SON PARA NADA DURADEROS, EL ALUMINIO SE MARCA FACILMENTE AL TRAERLOS EN EL ESTUCHE DE TORNILLOS, LA FUERZA DEL IMAN ESTA BIEN PERO LA CALIDAD NO ES PARA MUCHO TIEMPO DE USO,
mr m j hughes
2025-01-09 10:58:15
Great piece of kit stop the screw going in to far magnet a brilliant idea trying to hold the screw in place in a confined space with your fingers not a good idea just use this you’ll never be with out it
Recommended Products
