Your cart is empty.
Your cart is empty.
The C14 metal upgrade parts compatible with WPL C14 C24 C34 C44 B14 B24 1/16 RC Car.
The C24 metal axles made of high quality metal meterial,full metal design,stronger and durable in use.
The B14 portal Axles provide higher ground clearance and reduce the torque on other drivetrain components for improved performance.
Hardened steel gears inside, CNC machined for precision,durable in use.
Upgrade part, lightweight upgrade instantly enhances overall performance in handling and durability.
Easy and convenient installation, perfectly fit for your car;
Replacement the old or damaged parts,a great upgrade part for your rc car
Item Name: Front & Rear Metal Portal Axle
Material:Aluminum Alloy& Steel(Gear)
Rear Axle Full Length: 125mm;
Front Rear Axle Full Length: 131mm;
Color:Silver/Black(Optional)
Weight: 160g/Set
Package List:
1 x Front Metal Portal Axle
1 x Rear Metal Portal Axle
Ordinary Average Guy
2025-07-08 11:55:53
The media could not be loaded.
Darrell S.
2025-07-02 14:42:17
This is A kit. It's casted well but needs cleaning (matching,sanding) always fully disassemble all the parts you get. Shims and micro bolt kit you will want. When I removed the pumpkin covers I could see the inter bearings sliding around. (Matching)
Montana Gunter
2025-06-02 16:31:06
This is an overall decent axel, pretty good quality and great for the price. EXCEPT after installing I went on a test drive and the wheel fell off… only to find the tension screw for the hub was loose, after disassembling and re installing it did it again. 50/50 shot on performance.
Jonas Chanh
2025-05-10 17:40:38
Both differential did not come lube so I used a synthetic grease and the front differential came in reverse assemble. I have to take it apart and flick it around to make it work.The steering pull link came straight so I used another from my other kit and had to bend it to make it fit and work properly.
Bosiaya Espinoza
2025-04-19 14:49:01
They fit my Wpl c14 great!Makes sure to take apart grease them and thread lock the screws :)-any down fallsThey’re lightly greased soo make sure to grease them!They are heavy vs stock so metal driveshafts are a must!Low ground clearance I’ve hit differentials most and the steering linkage. But other than ground clearance I have had no issues yet! Rc on!
CMLeonard
2025-04-07 18:40:43
Bought this as an “upgrade†for my C24. Like another reviewer said, I had a wheel fall off shortly after installing. I found that both set screws on the rear hub had not be tightened. I took it apart to tighten all the screws and reassembled. After about 30 minutes of use, one of the rear wheels fell off again. I’ll have to take apart again to fix it. Maybe I’ll try locktite? While I had the truck flipped over, I found the screws on the front assembly were missing or loose too.There’s no real benefit to adding this. Sure it looks better but functionally, the stock one was better.
Juan Z.
2025-03-23 16:04:15
Cheap quality
Anthony Corveddu
2025-02-08 17:12:16
These would be better if I didn’t have to do so much to them. The finish on these axles are nice. However, there are several things that I would recommend doing before installing them.1) These axles come dry, so make sure you grease them.2) Put blue loctite on the small allen screws that hold the stubs on the rear axle. If you don’t, they will back out, making the wheels wobble and likely fall off.3) Put a nut on one end of the steering / alignment rod on the front axle. It does not come with one, and it’ll spin while driving it over stuff, causing your alignment to get all wonky.4) Metal driveshafts are a must as the stock plastic WPL ones do not fit without forcing them on. Even then, they do not go all the way on.Once all of this is done, they work great. They do seem to improve the steering radius of the truck a little. If I can do half stars it would be a 3.5.
Recommended Products
$79.98
$ 37 .99 $37.99