Your cart is empty.
Your cart is empty.Secure fit, A true performance product, Tested for function in a real world environment, Quality assured, Designed with the user and installer in mind. , Secure fit, A true performance product, Tested for function in a real world environment, Quality assured, Designed with the user and installer in mind. , Quality assured, Secure fit, Designed with the user and installer in mind, Tested for function in a real world environment.
Anonymous
2025-06-30 15:04:34
Without these speaker brackets I would not have have the mounting depth clearance to install Focal Access 165AC in my Kia Forte. Gave me about 10mm clearance behind the speaker cones for the front doors, enough to install XTC foam baffles that I got elsewhere. I did Focal ICU165 in the rear doors and sealed all speakers against the door cards with acoustic foam strips. Everything fit nice and snug.
Shawn
2025-06-03 14:36:23
Used these for a speaker upgrade on a 2021 Hyundai Tucson. These worked perfect! Mounts were spot on, had the raised lip to clear the magnet from hitting the glass window once mounted. The flat ones that say they are comparable are not! Get these for Hyundai when you see the factory mount is raised. Great quality and well worth the price for ease of installation.
Erik in Sac
2025-05-25 14:01:54
I used these to mount Dayton RS180P-4 woofers in the front doors of my 2020 Kia Telluride. There is just enough clearance for the magnet and window. The only modification needed was removing the inner mounting tabs for smaller speakers and a slight drum sand to open up the cutout for the 7" driver. With a standard 6.5" or 6.75" these should work great without modification. Main thing was they fit the doors properly. I would also recommend using foam rings to seal the speaker to the door panel/card, helps sound.
Ramiro Ledezma
2025-04-07 11:04:23
So the speaker harness did work for my 2017 Hyundai Elantra. However, I did have to modify it a bit by cutting the two plastic plug in pieces. I also had to run the cables into one of the screw holes to connect it to the speaker.
Joe
2025-03-17 15:57:38
Right shape. Didnt fit out the box.had to modify the whole thing to fit a standard 6.5 speaker. Try another brand first
Customer
2025-03-03 18:02:13
They worked to replace factory door speakers. Did have to cut tabs on back so screw hole would line up. But worked great.
Nicolas
2024-12-25 20:54:19
Bought it because amazon said it fit my car, sadly it pushed the speaker almost 2 inches out from the port where the factory speaker goes, and i could not get the door back on with it mounted. I think my Kia Sorento takes the Metra 82-7300 not this 7303.Otherwise, the product is made out of durable plastic and came on time. just didn't fit my car.
alfonso
2024-12-24 13:11:34
I just loved this product, the housing is SAME AS ORIGINAL.OTHER BRANDS do not have this housing, this mean that they do have the "right holes" but NO SPACE for the speaker magnet, HYUNDAI cars NEEDS adapters like this one, to fit correctly the speaker since it "rises" the speaker around 1in (5cm) and its enough to allow windows to go all the way down... if for some reason you are reading this after you buyed the "others (flats)", return ASAP and buy this ones....
Aron Grawberger
2024-11-19 11:47:05
Knowing your speaker size and some bolts from Home Depot and it fits perfectly. Love it.
Recommended Products
