Your cart is empty.
Your cart is empty.
【Product Specification】
-Type: MGN12 Linear Rail with Sliding Block
-Material: 304 Stainless Steel
-Slider Threaded hole: M3
【Warranty】
-Every product passed QC before shipment. But if you have problem, we provide free return/exchange in 90 days, pls contact us.
【Packing List】
-1x 800mm MGN12 Linear Rail
-2x MGN12H Sliding Block
Ati
2025-08-20 16:24:05
The rail is a good quality and I've had no issues with it
Quantum J.L. Bass
2025-07-24 14:22:41
The media could not be loaded.
marty marie
2025-06-15 17:49:17
Exactly as described. Smooth, steady movement.I was even able to fit a different bearing on the MGN12 rail, which doesn't always work because of slight differences in manufacturing.
Derek Alan West
2025-06-03 16:48:09
Great rail to carriage fit... but I ordered 800mm and recieved 750mm.
Jason
2025-05-16 16:40:43
This unit came straight and working well out of the box. Smooth glide without additional grease. Packaged well!
Marley
2025-05-07 13:56:56
comes in a sealed packaged oiled to prevent rust. Clean them and re oil with a light lubricant.
Southern Made Simple
2025-04-06 19:06:50
No frills, this is just a standard linear rail and guide.I installed on a laser engraver (Bachin) that was rolling on t-track with bearings and had a lot of play in all axis. The linear rails fixed the issue. They move freely upon arrival with only wiping away the protective oil.4-star because one of the two in the pair was missing the rubber end stops (not a major issue in my situation)
Reid Erickson
2025-02-20 17:35:39
These linear bearing blocks seem to be of decent quality. The surfaces are all ground flat and are dimensionally accurate. They were exceptionally tight on the first linear rail i tried to install them and I was certain that something was wrong with the blocks since the block that came with the rail slides smoothly. I was ready to write a bad review but first thought I should try them on another rail to be sure. I am pleased to report that they fit perfectly on the second rail and it seems my original rail perhaps to blame. Lesson learned: double check all the parts before assuming which part is bad.
Recommended Products
