Your cart is empty.
Your cart is empty."12" Bayonet Inflator Gauge Hose Whip Replacement Milton’s S-527 is the replacement hose whip for the Milton bayonet inflator gauge #522. With ¼” NPT threads, this 12” bayonet inflator gauge hose whip is compatible for use and connection with any of the 4 Milton Bayonet Inflator bodies: #520, #521, #522, and #523. Offers 10-120 PSI or 80-840 kPa. The air chuck has 1/8”-27 NPT threads. This hose whip is free-flowing and cannot be used without the Bayonet Inflator Gauge- Air is turned on/off by the bayonet controller. If connected directly to an air source, air will constantly flow out. Other replacement parts: S-527 replacement air chuck: Milton #500-4. INSTRUCTIONS FOR USE: If using a dual head type tire chuck with an inflator gauge and notice air is escaping through the off-side once connected to the tire’s Schrader valve, simply release the trigger and remove the inflator from the Schrader/tire valve. Point the straight side of the outlet up into the air (make sure it’s not pointed at someone). Squeeze trigger, allow air to flow (gravity will cause the sealing valve to drop), and place the chuck end onto the Schrader/tire valve while air is still flowing. Air will start to flow into the tire. Dual head type tire chucks are unable to inflate a completely flat (zero air pressure) tire. Tire air pressure would normally cause the sealing valve to move and seal the unused side of the chuck. However, if a tire has 0 air pressure, the self-sealing valve has no pressure to react to."
Hector
2025-08-18 16:30:17
Excelente
Brandon
2025-08-01 15:59:16
It's been working good doing what it's supposed to do.
Alan rosenbaum
2025-07-29 09:34:07
Work great make sure that the pipe size is correct
Melanie
2025-07-17 13:15:27
Had to buy an adapter to get it to fit my hose connection but it works great.
Reuben
2025-04-18 11:46:27
Seems like decent quality but doesn't fit my milton S-506 that had a leaking fitting.
C. Becker
2025-04-13 12:40:49
After trying other brands I wont have anything but Milton ever again. Nothing else holds up and is as accurate. as Milton.
Ricardo L.
2025-04-08 13:47:29
New replacement hose leaks at swivel joint and at chuck end. Bought the whole hose because they don't just sell the seal at the swivel joint. Thought this was the good brand.
Leo
2025-02-22 14:54:47
Was nice but could not use, had to return
Jason
2024-11-21 10:08:13
It would be nice to have the fitting size in the product description.This is a 1/4 npt, it is being returned.I needed a 1/8 npt for my Milton inflator.If you need the 1/8 npt buy the Milton 519 part.
Recommended Products
