Your cart is empty.
Your cart is empty.
Versatility in Motion
Many printers can be hefty, and carrying one can place undue strain on your back. This mobile printer cart, with lockable wheels, lets you have a dedicated printing station that rolls across surfaces with ease. Even compact printers take up valuable space that can be used for something else. Add this cart to your office or study and reclaim the space previously occupied by a printer. You can use the additional space for another monitor, a lamp or even more room for writing.
This printer cart is height-adjustable from 19.5 to 24.5 inches, so you can customize the printer shelves to give you room right where you need it the most. Collapse the three-tier cart into two tiers so you can easily hold smaller items. The shorter height lets you simply tuck it away under a desk or table to clear floor space. Use part of the stand on your desktop to keep items organized. This printer stand also includes a cord management system that keeps dangling cords off the floor for extra safety and organization.
The top tier of the cart includes a drawer for holding smaller items such as pens, markers, clips, ink, and other work essentials. The printer cart drawer has compartment spacers that keep items separate and securely in place.
With the capacity to hold up to 75 pounds (34.01 kilograms), this durable mobile printer cart has a two-tier height of 14 inches (35.56 centimeters) and 24.5 height (62.23 centimeters) at the three-tier height. The mobile printer cart is a great gift for people with a home or business office and a student study room.
Mrs Farrey
2025-08-30 12:37:16
This cart is under-sold. Seems a little flimsy for a printer, but perfect for my toaster. When I was growing up everyone I knew had a metal cart in their kitchen near the stove, where the toaster lived. If you were extra fancy, the cart went to the table on Sunday mornings so the kids could butter the toast while Mom made eggs. I wanted one of those handy carts just so I can have more space on my counter. I could only find them on ebay, starting at about $60. More than I was willing to pay. Enter the printer cart. Had 3 different carts in my wishlist, and this one was marked down first, so I ordered it. Does the job. Needs an extension cord. I did adjust the middle shelf, so taller things (like the oatmeal canister) will fit on the bottom shelf. BTW, the drawer is just deep enough for k-cups. One more plus.
FERNANDO
2025-07-19 12:04:30
I was impressed by the positive reviews for this product so I decided to give it a try. I am glad that I did!Upon arrival, the package was HEAVY for something made of plastic! I was pleasantly surprised when I opened the package to see that everything was packed securely and intact and no missing parts. Assembly was a breeze! No screws or bolts or glue....just fit the parts together! Well...they fit perfectly and it took me no more than maybe 10 or 15 minutes...taking my time!The assembled stand was the perfect height and overall size for my space. The Canon Image Class MF4350D fits perfectly on top with the paper tray protruding from the front by about 3 inches. The casters are a big plus allowing me to move it as necessary. The unit rolls easily and does not wobble.The 2 storage shelves below and the small drawer allow for storage of office items, paper, small computer parts, and testing equipment, etc. The back of the unit also has slots for wire and cable management!*****a small note which some may consider a negative BUT I do not: because the many parts fit tightly together without screws or bolts this unit should only be picked up from the very bottom to avoid it coming apart.Good product that I highly recommend!
Will O.
2025-07-07 11:14:11
It's surprisingly sturdy for a plastic unit. 3 shelf unit with a small drawer. Drawer comes with 2 dividers (not shown in the instructions) and divides into 1, 2, or 3 longitudenal spaces depending on how many dividers the user decides to use. It's only about an inch and half deep so it's not going to be much use for 8.5" x 11" paper unless you don't install any of the dividers.I'm replacing an unstable narrow (not meant for printers) wooden shelf unit. The drawer on this unit was good for some paper clips, binder clips, some small packaged labels, and a few pens and pencils.Assembly took about 20 minutes. There are several pieces that all fit together snugly without a problem and there were no missing pieces with this unit. The instructions are only visual, no text. There are also no screws or tools required to assemble the unit.The other two shelves have plenty of space to hold several reams of paper if needed. I use a plastic drawer on one of the shelves to hold odds and ends and the other for paper. There's nothing on the shelves to keep anything round from rolling off.My only complaint is that one of the locking wheels levers will not fully unlock (the lever won't raise up all of the way) and so it doesn't roll as easily as the other wheels. It's a minor issue. I haven't called the manufacturer to see if I can get a replacement yet but will try that next week.The cart doesn't feel flimsy like some plastic carts I've used in the past.
LisaM
2025-06-19 14:20:19
Just bought a 2nd one for my other printer. Couldn’t find a listed part: my bad!! Turns out after a very prompt exchange with their customer service that the drawer rails are already screwed onto the top shelf. The two shelves are great for keeping extra paper. And the drawer while not very deep is a good place for scissors and the like.As a small table on wheels it could be used for other purposes than as a printer stand. For example it might be a nice place for potted plants that would be easy to move around.Well worth the price.
Sardonick
2025-05-29 21:39:08
Zero assembly problems, just pops together, but beware, it also falls apart if you try to pick up with anything on the shelves, so move it using the casters or empty it first. The drawer is only good for small, light thing, like pens, pads, general supplies, and it has no stop to keep it from pulling right out each time, so you have to be careful not to pull it clean out of the shelf. The top shelf will fit most printers, but the majority of them will hand over the edges. Cable management is nice. The middle and bottom shelves will hold paper reams or smaller items. Overall, it's good as a sidecart for an average printer and some paper. It needs a drawer stop, and it needs some sort of locking on the shelves in case someone tries to pick it up to move it, and it could use a rubberized surface instead of the slick hard plastic that lets everything slide around. Consider it a basic cart for smaller, basic items.
Nicholas Leshko
2025-05-10 17:04:32
Yes it's almost entirely plastic, but for 20$ it does what I need it to do. My printer fits on it comfortably, I have storage for the paper on the shelves, and there's some additional storage in the little drawer. For the price it was a simple and effective solution to my needs.
Malcolm Graham
2025-04-18 18:00:56
The item was easy to assemble except for the sliding bars for the drawer. These have two purposes, one to hold the shelfs together on delivery and then to hold the drawer in place. This not clear on the diagram. Finally, structure could be better designed by way of securing the wheels and in terms of mobility
Koh Mui Kiang
2025-03-10 17:26:59
Great trolley to hv to work around.
josé
2025-02-26 15:25:10
il devait entrer dans cette largeur et pouvoir bouger facilement au besoin.et bien rien à dire, pile poil, assez solide pour mon imprimante A3un tiroir en plus.Rien à redire je conseille.
Alejandro
2025-01-29 20:12:55
Me gustó mucho el mueble, fácil de armar y muy práctico espero que dure muchos años. De momento todo bien para impresoras no muy grandes está ideal asà como la mÃa en la foto.
tom
2025-01-13 13:27:15
Easy to put together. Shelves and drawer are hand. Good sturdy design.
Recommended Products
