Your cart is empty.
Your cart is empty.Product Description
Fiber Mini Optical Power Meter
Fiber Mini Optical Power Meter
1、Short press can start the machine.
Auto-shutdown function is turned on by default (10 minutes). Auto-shutdown function can be turned on or off by pressing this button. The power icon on the upper left of the screen is turned on or off accordingly.
Long press this key, shut down.
2、LIGHT
1 > Backlight on/off: Short press to turn on the backlight function, then turn off the backlight.
2 > 650nm light source on/off: long press to the open red light - - then flicker at 1Hz - - then flicker at 2Hz - - then turn off the red light, and cycle in turn. When the red light is turned on, the first line of the screen displays 650 nm.
Warning! Do not look directly at the laser light, lest it cause damage to the eyes.
3、d
By short pressing this key, the relative optical power test (insertion loss test) or absolute power test can be realized. After entering the relative power test mode, the insertion loss (dB) is displayed at the bottom of the screen, and the reference value is displayed at the second line of the screen. Open RJ45 test mode in 3 seconds, then display RJ45 in the third line, and then exit RJ45 test mode.
4、REF
Press this key to set the current optical power as a reference value and enter the relative optical power test (insertion loss test) mode. The second line of the display screen will display the set reference value, and the third line will display the relative power value (insertion loss dB).
5、λ
Eight different test wavelengths can be selected, 1310, 1550, 1490, 1625, 1650, 850, 1300 and 980, and the selected test wavelength is displayed on the upper screen.
Matthew D. Rock
2025-08-31 17:56:22
Fast easy to use and very portable. Splice fiber for a living and this is all you need to know the light levels. It doesn't have a red laser to find breaks though which is always nice to have
KCA
2025-02-18 12:58:07
I'm only an amateur user when it comes to fiber optic cabling. I got this for my home, but compared it to one at work, and was pleasantly surprised that the readings were the same.No connection adapters are included, which is a shame, but that's to be expected at this price-point. If you need to test a cable that ends in something other than ST, adapters are available online.
Jason W
2024-11-17 12:33:10
I got this to find a more value priced tester for my work. I'll tell you, this works just as good as our $400 VeEx fiber tester. I got the exact same light readings! at 1/40 the cost this thing is amazing! The only drawbacks are there is no instruction manual, and it does not come with any adapters for smaller fibers. You can buy universal adapters to clip on which are not expensive. Still a great purchase.
Recommended Products
$518.84
$ 99 .00 $99.00