Your cart is empty.
Your cart is empty.Product Description
Saw Blade Cutting Material
Please be careful when cutting:
- Do not touch the saw blade during cutting. Please wear gloves if necessary. Please use different saw blades to cut different materials.
- This miniature table saw is not suitable for cutting materials that are too large, too wide and too thick. It is easy to jam and overload.
- If the motor and power supply are very hot after long-term use, please pay attention to let the table saw stop and rest.
- The working time of the mini table saw should not exceed 2 hours. Please rest for 30 minutes before continuing to work.
- You can use this miniature table saw to make some crafts, small woodworking, diy small wooden furniture and make some toys for your kids.
- Please be careful not to feed the material too fast. Otherwise it will jam the saw blade and cause the table saw not to work.
What kind of material is this mini table saw suitable for cutting?
What kind of material is this mini table saw not suitable for cutting?
- It is a miniature hobbyist table saw and is not suitable for cutting boards that are too wide, too long, too thick, and harder materials.
- Suitable for cutting round bar diameter: within 2 cm/0.79 inches. The small table saw is suitable for cutting width/length: within 10 cm/4 inches.
Shirley White
2025-08-12 16:19:50
I needed a saw to cut very small hard wood pieces and this saw worked wonderfully. I was even able to cut small pieces (1/8" square) of balsam wood. I lay them side by side, taped the back and was able to cut 14 pieces at a time from 12-inch strips of wood. A great little saw.
Cyndy A
2025-05-15 13:01:47
I make small toys and robots so having this mini table saw really helps cutting Popsicle sticks, dowels etc. It sure saves me a lot of time and the sandpaper is really nice. Like I said it saves time and makes projects look a lot better.
SWatty
2025-05-14 13:58:02
This thing rocks....It is small... tiny... but has done a bunch of cutting of teak molding (up to 3/4"... teak 1/2 plywood... even a 2x2!It does everything I have thrown at it.I only wish now... being greedy... that it could cut on 45 degrees... but that might be asking to much.Buy with confidence.... it is not a work-site table..... but does more than I asked.
JOHN
2025-04-06 13:32:42
No blade guard, no way to adjust blade height, weak motor.
Rick B.
2025-02-25 14:13:43
A bit underpowered, but works well on really thin, soft woods. There is no provision for lowering the blade, or cutting angles. Bogs down easily, even with light, thin stock.
Larry Probert
2025-01-11 16:56:01
Dissapointed that I can't adjust the blade height. I have only made one test cut. 45degree angle was right on. Missing the clear protective cover but got a peice of masonite wiith a cutout for the blade but I have no idea what to do with it. The power supply is wonky...bad connection in it somewhere. Sometimes I have to play with it to get it to work. We will see as I work with it. Edit...I would never get another table saw without a blade height adjustment..too dangerous. Working with the sander and having the blade spinning is a combination for an accident.
Recommended Products
$639.00
$ 99 .00 $99.00
$329.12
$ 99 .00 $99.00