Your cart is empty.
Your cart is empty.Multi-functional Timer delay module is a revolutionary circuit with many commonly used timer delay functions. It is perfect for many applications from hobby to industrial controls. The timer delay module allows delaying power, disconnecting power after a preset period, cycling, and many other functions. Time delay can be set from 0.1 seconds to 400 days. The circuit is utilizing an embedded microcontroller so the time delay is precisely repeated every time. Timer functions are loaded via a separately sold programmer. The programmer can load a set of standard functions as well as custom functions created based on the specific requirements. The circuit can support up to 5 amps. Timer delay module can be configured to delay power, supply power for a period of time or cycle power with preset delay and etc. With external relay control any current or voltage. Great for automotive application, car amplifier control delay, industrial controls, and hobby. We are confident timer will work for your project. Please contact us if you are not sure. Delay from 0.1 sec to 400 days 25+ time functions. External trigger. 6 - 18 Vdc. 5 amp. Version 8. Easy to connect and configure. Configurations are done via phone, tablet or laptop (requires separately sold programmer) We have a number of videos to help connect and configure. 5 amp. Small packaging. 28x23x9mmMade in USA. The programmer is REQUIRED to program the timer and sold separately: Amazon item: B0B6678WTR 10amp version plus programmer Amazon item: B01HNDOCKK
Yomanne
2025-09-05 13:56:50
The media could not be loaded.
Michael E Hinshaw
2025-08-16 11:56:19
I use these in low power mode to extend power by a few seconds to boot up a LoRa device. Works great and really does have background power consumption of only 27 micro amps. Great for use with batteries. Does need a separate programmer, but it is easy to use. Once you have used one of these, you begin to see the many other uses possible. Well-made and worth the money. I do recommend these.
sojourner
2025-07-28 11:52:20
These are a very versatile and cost-effective timing unit. I used two of these to control the siren at our fire station- one for overall cycle length, and the other for the repeating rise and fall within that cycle. Have since added a third to delay siren activation briefly for those responders nearby to hear clearly the radio dispatch before the siren engages.I can find a lot of uses for these!
Randall
2025-07-07 15:08:34
Awesome timer, i just completely missed the you need the programmer to set it up part. Once you have that, it’s not too bad, just lots to weed through because of all the options.
J. M. Padgett
2025-05-19 13:55:06
I set these two timers up for turn signal/daytime running light (DRL) integration. They power my DRLs when I turn the motorcycle on and when turn signal is applied, they deactivate the DRLs and the integrated amber LED’s flash in time with the bike’s turn signal relay. Timers were set to Function 13, 1-second time-delay, trigger option 2, output reversed. Programming them was much easier than I’d feared and took me no more than 10 minutes. Very pleased with these and will buy more in the future. Much smaller and lighter than typical relays and completely waterproof. Highly recommended.
Barry Hudson
2025-05-04 17:55:42
I hate it. When my eyes were good enough I could make simple units that fade a dome light and install go dark when the key is turned on and only required 3 wires to make it work. This little thing is a peace of poop.
David Pavao
2025-03-30 16:34:44
The media could not be loaded.
David P.
2025-03-21 12:01:37
IF YOU FOLLOW THE INSTRUCTIONS TO PROGRAM THIS IT WILL DRIVE YOU NUTS!! THIS IS A GREAT PRODUCT DESIGNED TO TURN ON AND OFF DEVICES ALSO TO FLASH OR MANY OTHER THINGS. I BOUGHT IT FOR A SIMPLE JOB OF .5 SECONDS ON AND 150 SECONDS OFF THEN REPEAT, BOY WHAT A EDUCATION, I FINALLY FIGURED IT OUT AFTER WATCHING THE YOUTUBE VIDIOS AND READING THE BIGGG INSTRUCTION MANUAL. IF YOU ARE A COMPUTER PROGRAMER YOU PROBABLY WON'T HAVE ANY TROUBLE, I THINK, .. WHAT I FIGURED OUT IS THAT WHEN I WANTED THE TIME ON (OR.5 SEC) I HAD TO TOUCH T-1 TO GROUND, BUT WHEN I WANTED THE TIME DELAY THERE IS NO INSTRUCTION ON WHAT TO DO. THE INSTRUCTION SAY TO TOUCH T-2 TO GROUND BUT DOES'T TELL YOU WHAT THAT DOES, AFTER MANY HOURS OF TRIAL AND ERROR I FIGURED OUT THAT THE T-2 TOUCH TO GROUND IS THE TIME OFF INTERVAL AND IF YOU HOLD IT FOR 150 SECONDS IT WILL PROGRAM THE TIME OFF DURATION I WAS LOOKING FOR. BUTTT, IT DOESN'T TELL YOU THAT THE LIGHT IS ON WHILE YOU ARE PROGRAMMING THE TIME OFF. THIS THREW ME FOR A LOOP, JUST SIMPLE INSTRUCTIONS LIKE, TIME ON IS T-1 FOR THE SECONDS OR MINUETS YOU WANT AND T-2 IS THE DURATION OF THE OFF TIME BUT THE LIGHT WILL BE ON TO LET YOU KNOW IT IS SETTING YOUR OFF TIME. THEIR HELP LINE WASN'T MUCH HELP EITHER, THEIR ANSWER WAS WATCH THE VIDIO AND READ THE INSTRUCTIONS. I BET ANY BODY COULD NOW SET THE TIME ON AND DURATION OFF LIKE I DID WUTH THESE SIMPLE INSTRUCTION. YOU DO HAVE TO ADVANCE THE FUNCTION TO 5 FOR THE REPEAT CYCLE, AND EVEN THEN THE INSTRUCTIONS DON'T TELL YOU (DO NOT TURN OFF THE POWER TILL FUNCTION IS SET) AND THE FUNCTION SETTING WILL TURN LIGHT OUT TO ADVANCE WHILE GROUNDING T-1 AND T-2 AT THE SAME TIME, BUT DOESN'T TELL YOU THAT THE LIGHT WILL COME ON WHEN THE WIRES ARE REMOVED TO MOVE ONTO THE NEXT FUNCTION. WHEN DONE YOU MUST REMOVE THE INPUT POWER TO LOCK IN THE SETTINGS. THEN TEST TO SEE IF YOU ARE SET, I WAS AMAZED THAT THE TIMER WENT ON FOR.5 SECOND AND OFF FOR 150 SECONDS AND REPEAT, UNPLUGGING THE POWER AFTER THAT DOES NOT CHANGE THE SETTING UNLESS YOU REPROGRAM IT. THE USE FOR THIS FOR ME WAS TO REPLACE A SET OF POINTS IN A ANTIQUE CLOCK THAT PULSED TO GROUND ABOUT EVERY 150 SECONDS SO I GROUNDED THE POINTS AND PULSED THE VOLTAGE IN WITH THIS TIMER, WORKS GREAT NOW.
Customer
2024-12-18 12:19:41
Glad there was programing instructions to return the device to factory settings............ There is a 31 page instruction guide for a device the size of a postage stamp. Took me several tries, but once programed I was very happy with how it worked.
Recommended Products
