Your cart is empty.
Your cart is empty.Mirror Cutting Tool Kit – Not Just Any Mirror Cutter The Amazing Glass Cutter Made In Uk A Manual Glass Mirror Cutter That Lets You Cut Straight Radius And Wavy Lines In Mirror Glass Stained Glass And Glass Tiles. The Scoring Wheel Is Not Sharp, It Is Likely The Dullest Tool You Will Own But The Hardest, This Hardness Along With The Special Angle Ground Into The Mirror Scoring Wheel Allows The Amazing Glass Cutter To Cut Thick Mirror And Cut Thin Mirror And Glass Materials And Hard Tile Without Hurting The Wheel. The Secret Is To Follow The Instructions Exactly. Practice On A Spare Piece In Order To Work Out Enough Pressure To Apply, Usually Not Enough Pressure Is Applied To Start With But Sometimes Less Pressure Is Better So Practice Makes Perfect. Cutting On The Floor Instead Of On A Solid Board At Waist Height Will Fail And Give Uneven Pressure Along The Score Line And May Even Crack The Mirror Before You Start. Not Oiling The Scoring Wheel And Making Sure It Is Turning Very Freely May Cause The Wheel To Bind, Drag And Even Lock Up And Just Scratch The Glass Instead Of Evenly Scoring It And This Will Prevent The Mirror Cutter From Working Correctly. Holding The Mirror Cutting Tool By The Plastic Grips When Scoring With Your Strongest Hand Means That You Are Only Applying Minimal Amount Of Pressure If Any On The Cutting Wheel At The Point Where The Scoring Is Happening. Always Pull Towards You Not Push Away. For Stained Glass, Plate Glass, Picture Framing Glass Or Fused Glass The Cutting Wheel Should Be Oiled Every Single Score, Oil Will Run Down Onto The Glass And Will Not Only Cool Down The Glass And Give A Cleaner Cut It Will Also Extend The Life Of The Cutting Wheel. If You Can Wipe The Oil Off The Glass And There Is No Score Line Visible, Then You Need To Increase The Pressure – Make Sure You Are Holding Close To The Wheel And Use The 2 Handed Method If Needed Especially If You Do Not Have A Lot Of Strength In Your Hands Or Are Cutting A Very Hard Material.
Customer
2025-08-30 12:18:56
So I have been incorporating glass into my woodworking projects for a couple of years now. I always struggle with cutting the glass. When I know I have a project with glass, I worry about it. I have used different types of cutters, and it is always hit and miss. I have wasted a lot of glass. It is probably the result of poor technique on my part. I purchased this product, watched the video on how to use it, and made a flawless cut in seconds. Big game changer for me.
Kathy
2025-08-25 13:13:39
The media could not be loaded.
Peter Kim
2025-08-23 18:17:11
You have to get use to it but it does a good job on thin to medium. If you use it on thicker glass doesnt seem to always run along the score. However does a pretty decent job.
Customer
2025-08-22 10:56:41
So I have been incorporating glass into my woodworking projects for a couple of years now. I always struggle with cutting the glass. When I know I have a project with glass, I worry about it. I have used different types of cutters, and it is always hit and miss. I have wasted a lot of glass. It is probably the result of poor technique on my part. I purchased this product, watched the video on how to use it, and made a flawless cut in seconds. Big game changer for me.
Kathy
2025-08-18 15:12:43
The media could not be loaded.
Peter Kim
2025-08-17 15:53:17
You have to get use to it but it does a good job on thin to medium. If you use it on thicker glass doesnt seem to always run along the score. However does a pretty decent job.
S. Sullivan
2025-08-02 13:11:59
Works great. Easy to use!
SAM
2025-08-01 11:53:39
The description and video make it seem like this cutter is a breeze and is capable of very complex cuts given the large handle. In reality the instructions say not to use the handle for mechanical advantage and to grip as close to the wheel as possible in order to apply the correct pressure. But of course then the handle is in the way which defeats the purpose. None of my cuts followed the score lines at all. It did not matter how short or thin the glass was. The oil only made things worse. The wheel would skip instead of make a solid score line.
Arnieb
2025-07-28 21:15:17
I bought this as an experiment because I needed a way to cut a large, 1/4" thick mirror into three smaller mirrors. The glass shop was really expensive, so I thought this was worth a try. I was disappointed. It works about as well as the less expensive glass cutters, but definitely could not cut a straight edge on the mirror.Perhaps I am not experienced enough, or the mirror was too big. Whatever, the reason, I was disappointed.
TJ Friar
2025-07-25 18:27:59
This tool was excellent on glass tile for our back splash. Instructions were very helpful.
Thomas
2025-07-11 16:31:02
Bulky, not easy to use, not worth the money compared to other glass cutters . Wouldn’t recommend.
CSul
2025-06-26 11:26:48
Cuts well enough but no reservoir so you need to dip by hand. The handles aren’t comfortable to apply the right pressure and the flaps of the pliers part make it difficult to see your cutting line. Not my favourite tool fo cutting glass for mosaics.
Mr almond
2025-06-08 10:46:48
Does the job very well used a couple of times now on 2to3 mm glass no problems
Admac
2025-05-30 13:59:03
Returned a cheaper one after it ruined a pane. This one works every time. It's more expensive but it's brilliant. Don't waste time with inferior, cheaper products.
malcolm Russell
2025-05-28 17:21:08
Tool was not as strong as I expected but plenty strong enough to crack a £200 peace of Glass.That will teach me !
Saifullah
2025-05-06 17:39:45
Amazing … it did the job… lovely, ain’t it for a novice!
S. Sullivan
2025-05-01 14:58:10
Works great. Easy to use!
SAM
2025-04-29 10:13:26
The description and video make it seem like this cutter is a breeze and is capable of very complex cuts given the large handle. In reality the instructions say not to use the handle for mechanical advantage and to grip as close to the wheel as possible in order to apply the correct pressure. But of course then the handle is in the way which defeats the purpose. None of my cuts followed the score lines at all. It did not matter how short or thin the glass was. The oil only made things worse. The wheel would skip instead of make a solid score line.
Arnieb
2025-04-20 11:30:43
I bought this as an experiment because I needed a way to cut a large, 1/4" thick mirror into three smaller mirrors. The glass shop was really expensive, so I thought this was worth a try. I was disappointed. It works about as well as the less expensive glass cutters, but definitely could not cut a straight edge on the mirror.Perhaps I am not experienced enough, or the mirror was too big. Whatever, the reason, I was disappointed.
TJ Friar
2025-04-02 15:47:33
This tool was excellent on glass tile for our back splash. Instructions were very helpful.
Thomas
2025-03-16 14:48:30
Bulky, not easy to use, not worth the money compared to other glass cutters . Wouldn’t recommend.
CSul
2025-03-13 18:02:37
Cuts well enough but no reservoir so you need to dip by hand. The handles aren’t comfortable to apply the right pressure and the flaps of the pliers part make it difficult to see your cutting line. Not my favourite tool fo cutting glass for mosaics.
Mr almond
2025-02-11 10:50:29
Does the job very well used a couple of times now on 2to3 mm glass no problems
Admac
2025-01-24 18:05:12
Returned a cheaper one after it ruined a pane. This one works every time. It's more expensive but it's brilliant. Don't waste time with inferior, cheaper products.
malcolm Russell
2025-01-09 12:52:46
Tool was not as strong as I expected but plenty strong enough to crack a £200 peace of Glass.That will teach me !
Saifullah
2024-12-19 10:50:55
Amazing … it did the job… lovely, ain’t it for a novice!
Recommended Products
