Shopping Cart

Your cart is empty.

Your cart is empty.

Miuzei 20KG Servo Motor High Torque Digital Servo Metal Gear Waterproof for 1/8, 1/10 RC Model DIY Car Robot, DS3218, Control Angle 270 Degree (4 Pack)

4.6 (13) Write Review
Free shipping on orders over $29.99

$43.99

$ 22 .99 $22.99

In Stock

1.NumberofItems:4


  • 270°Digital Servo: built-in brush motor and stable motherboard, precise angle without deviation.
  • Control System: change of pulse width. Pulse range 500usec - 2500usec for 0° - 270° (90°--1166usec, 180°--1833usec).
  • High Performance: high quality aluminum gear equipped with double ball bearing, less noise, more stable torque. After the upgrade of RC Servo, two functions are added, which can be automatically protected with anti-burning and rotor blocking protection; 5S overload protection, 70 ℃ overheat protection
  • Large Torque: it reacts quickly and the maximum torque is up to 22.8kg·cm (316.63oz·in) at 6.8V.
  • Application Fields: suitable for airboats, 1:8 / 1:10 rc cars, robots, intelligent DIY, also rigid wings, helicopters, and other RC models.


Product Description

Miuzei 20KG Servo Motors High Torque Digital Servo Metal Waterproof Servo for R/C Car Robot

1/10 servo rc steering servo servo motor high torque waterproof servo rc car servo 20kg servo 1/10

High Torque Servo Motor 20kg/20kg Turning Servo/Servo Motor 270 Torque

High torque rc steering servo, servo motors for rc car, commonly use in rc car steering servo like climbing cars, robots, mechanical arms,rock crawler vehicles & remote control toys. 270 degree rotation perfect for robot joint activities. Apply Environmental Condition: Storage Temperature Range(-30℃～80℃) Operating Temperature Range(-15℃～70℃) Operating Voltage Range(4.8-6.8V) Mechanical Specification: Size:40*20*40.5mm Weight:60g Gear ratio:275 Bearing:Double bearing Connector wire:300±5mm Motor:3-pole Waterproof performance:IP66

Electrical Specification: Idle current(at stopped):4mA(5V)/5mA(6.8V) Operating speed (at no load):0.16 sec/60°(5V)/0.14sec/60°(6.8V) Stall torque (at locked):18 kg-cm(5V)/21.5 kg-cm(6.8V) Stall current (at locked):1.8A(5V)/2.2A(6.8V) Control Specification: Control System:PWM(Pulse width modification) Pulse width range:500～2500μsec Neutral position:1500μsec Running degree:180°or 270°(when 500～2500μsec) Dead band width:3 μsec Operating frequency:50-330Hz Rotating direction:Counterclockwise(when 500～2500 μsec)

metal gear servo rc steering servo 1/10 digital servo 1/10 rc servo servo rc 270 degree servo r/c

Waterproof Rc Servos/Rc Waterproof Servo/Rc Servo 1/10 Waterproof

servo for 1/10 rc

1/10 rc servo

servo for 1/8 rc

IP66: This rating indicates that the device is dust and splash water resistant. It prevents small solids from entering the device, such as dust, as well as preventing large amounts of liquid splashes from entering the device. This rating is suitable for indoor or semi-outdoor use.

Warm Tip:

When you use the servo in a water environment, generally 3 to 5 minutes of short time immersion can work normally, but not for a long time immersion; the depth of water should not exceed 0.5 metres.

Why choose 20Kg Miuzei Digital Servo?

High torque output: servo motor 20kg driver has excellent torque output ability, which can provide strong control force and stability, suitable for heavy load motion and fine control applications.

High precision position: waterproof rc servos engines are equipped with high-precision position systems, which can achieve more precise motion control, ensuring stability and accuracy of rc waterproof servo.

Durability & reliability: rc servo 1/10 waterproof is usually made of strength materials and high-quality components, with high durability and reliability, 1/10 rc servo can cope with complex working environments and harsh usage conditions.

Diversified applications: servo for 1/10 rc is suitable for various mechanical structures, aircraft models, robots and other application fields.

20kg servo

Metal Gear Steering Servo/Standard Servo Metal Gear

  • Amplifier type: Digital controller
  • Command signal: Pulse width modification
  • Bearing: Double ball bearings
  • Control angle: 270°
  • Pulse width range: 500～2500usec(0 ~ 270 °)
  • Dead band width: 3 usec
  • Neutral position: 1500usec
  • Stall current: 2100mA±10% (4.8 V) -2700mA±10% (6.8V)
  • Peak stall torque: 20.5kg·cm (284.7oz·in) -22.8kg·cm (316.63oz·in)
  • No load speed: 0.18sec/60° (4.8 V); 0.14sec/60° (6.8V)

SSS
2025-09-03 16:26:44
Been using 2 of these Servos in our Life Cycle Tester, and I am surprised by the Long Life of these motors.They have done about 3 million+ cycles in a very narrow travel band.Wonder what kind of Potentiometer is being used for position sensing.Great Servos at a very nice price!!
WILLIAM C ROBINSON
2025-09-02 18:37:55
The two servos work flawlessly.
Jay Busa
2025-08-21 11:38:48
I got these to replace Traxxas 2075's, They have plastic shells and gears and make 9kg@6v. I'm limited by my stock reciever only being able to take 5.5v.These servo's say 20kg on the case, they have a metal side case and all metal gears. Their claimed actual torque is 18kg@5v and 21.5kg@6.8v.I installed 2 of these in my brushless E-MAXX, which at the low end should double the torque. They are way more powerful but they have trouble keeping center, it's like every time you turn the center moves a little to the opposite side in neutral. The servo's aren't fighting against each other I tuned that sht perfectly.I have 2 of the same brand blue 35kg servo's. I have 1 in my Slash 4x4 and it's "overkill" if there's such a thing. So I'm gonna throw the 2 35kg's in my E-REVO and see how that goes. That truck has plagued me with recentering since I got it. The 2075's in that are so weak.Wish me luck
David G. Surace
2025-08-16 12:32:16
Been using these for a while now. Strong and accurate
ped
2025-08-07 13:30:42
had futaba servos that just didnt work well. replaced them with these and everything is functioning much better. used as throttle servos on gas boats. all these red servos like miuzi or whatever are now in everything I own they just work really good and the price is great.
Bob
2025-07-16 13:04:55
One servo dead on arrival. But otherwise pretty decent.
Kevin w
2025-07-14 10:10:16
seems pretty strong and a lil faster then i thought so far im happy with them cant really beat the price point either
Matt fox
2025-05-12 15:52:52
For the price they work good on my rc10 car.
Tina Velbri
2025-05-11 18:01:26
Exactly as shown. Great quality. My son is excited to use it for his robot.
Allan cole
2025-04-24 16:40:02
Works great so far and for the price I'm amazed
yves cyr
2025-03-28 12:23:01
Rc
Peter yee
2025-02-17 18:14:34
Great product for the price dose what it was intended for.
Scott
2025-01-02 10:05:53
Well packaged and came with metal steering horns