Shopping Cart

Your cart is empty.

Your cart is empty.

Mofeez Mobile Base Wheels Kit 400lbs Loading Capacity for Moving Woodworking Equipment, 3in Rubber Wheels Rolling Smoothly with Bushings and Bearings

Free shipping on orders over $29.99

$44.99

$ 22 .99 $22.99

In Stock
  • Weight Capacity--- 400 lbs./181kg. Perfect for mobilizing table saw, Lathe, 6" Jointer, radial arm saw or other heavy tools, thick steel panel and strong weld joints is durable enough to hold up your drum sander with ease.
  • Non Marring 3” Wheels--- The wheels are a relatively hard rubber that never scuff up a floor. Rolls smoothly with bushings and bearings, let you move tools with ease.
  • Plywood Thickness Range from 1/2" To 1"--- The plywood base needs to be at least 1/2” thick. If not the bolts will scrape the ground. This kit comes with two sets of screws for different thickness bases. M8-30 machine screws for plywood 1/2”-3/4” thick, M8-40 machine screws for plywood 3/4”-1” thick.
  • Raise Machine about 3/4”--- The height of the bottom-surface when the orange lever is in the locked/flat position is about 3/4”. It does not lift very high but enough to wheel on concrete.
  • 12-month Warranty --- Make sure there are no missing parts and that there is no shipping damage. Any broken or defective unit will be replaced, just contact us through amazon message system.



Product Description

Mobile Base Wheels
Mofeez Mobile Base Wheels
Mofeez Mobile Base Wheels

Mofeez Mobile Base Wheels

Mofeez Mobile Base Wheels Kit

Mofeez Mobile Base Wheels

Mofeez Mobile Base Wheels Kit

Mofeez Mobile Base Wheels Kit

Mofeez Mobile Base Wheels


Customer
2025-07-25 14:15:45
A nice wheel set for a mobile cart.
sdb
2025-06-10 18:25:29
This base appears to be constructed of sturdy material and is easily assembled EXCEPT for screwing bolts into the ink threaded holes. Make sure you have a die set to clear the threads. This is also a problem with the banned brand composition’s base lassembly The bolt holes are drilled and taped before paint is applied. This results in difficulties getting bolts to screw in. When assembling the name brand base I was able to screw the bolts into the mounting plates without trapping them BUT with some difficulty. This product required the bolt holes to be cleared with a tap. Once threads were cleaned out assembly went smoothly.
Carol Legler
2025-05-17 14:06:08
Love it for my table saw
D H I
2025-05-08 10:21:22
Everything was assembled except for attaching to the plywood. As others have stated the screws were a little difficult to get started, but I ran a screw in and out with an impact driver before assembling, after that the assembly was easy. These are great, sturdy and quality paint! I wish I would have found this earlier!
L
2025-05-06 21:20:47
Love it. Works great for tools stand ,, highly recommended
Thomas Miano
2025-03-28 16:48:32
Good product but as most others have noted, the screws are hard to screw through, the tabs of the top plate don’t fit into the slots of the bottom plate ( I had to grind them down smaller to fit) and the feet are far too short to contact the floor (I had to put thick pads on them). Nonetheless, these are easily overcome and it works well after.
Thomas Jellison
2025-02-18 11:56:59
I would like to thank Amazon for replacing the mobile base wheel kit. The holes in the plates were threaded like they were supposed to be. I will be sending the other set back tomorrow.
shannon
2025-01-24 14:13:48
Very solid construction, very easy to assemble. My only complaint is the stationary wheels are too soft they start to flatten if left in the same spot to long. There is not enough lift from the floor with the 360 degree wheels but otherwise great product for the price
Recommended Products

$10.11

$ 4 .99 $4.99

4.3
Select Option

$122.00

$ 57 .99 $57.99

4.8
Select Option