Your cart is empty.
Your cart is empty.Moog Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. Moog is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs.
skidoocruiser
2025-08-19 11:08:05
perfect fit
Northshore McLeod
2025-08-12 16:00:45
I had to redrill some of the holes to match and the supplied bolts were too small, so I had to reuse existing bolts, probably to cover variables in different years that this part covers. But, other than that, this is a good product.Everyone with a f150-bronco and/or explorer needs to examine theirs. These things are prone to cracks and failures, especially where the caustic road de-icer is used.. Replace them NOW if you see excessive rust or stress fractures. You don't want to think about what could happen if one of them lets loose.The price fluctuations on amazon are a bit irritating. This thing went up $15 in price one night then a week later it was back to the price it was at when I started watching it.
Customer
2025-07-11 14:24:51
I have a ford f-150 4x4 and needed to replace the brackets as originals rusted out. I read from other reviews that the bolt holes were too small in comparison to the hole in the frame. And Yep I agree, I used larger bolts that fit the frame holes so I drilled the holes in the bracket a bit bigger and used new hardware. I suppose there is nothing wrong with the holes and the supplied bolt seem like they would work. But I am in the bigger is better group and I would rather have a titer fit. Everything worked great I had no issues replacing both sides. oh I would suggest if you are replacing the bracket to get new bushings while you are doing the job. And if you need to drill out the original rivets get yourself some extra drill bits I used 1/8 the for a pilot stepped to a 5/16 then 7/16 or maybe it was a 1/2 for the head and a good sized metal chisel with a 2 lbs hammer to knock the head off after drilling part way through and a punch to knock the rivet out of the frame. the job goes pretty quick once you get setup. Yes I would buy these brackets again
John D. Taylor
2025-07-08 14:54:18
Moog is a trusted brand and Amazon comes through once again!
Joe
2025-06-27 17:49:46
This worked perfectly to fix my radius arm issues, figured since I was replacing the springs and had to take the arm off anyway, might as well replace everything. I just reused the OE bolts for most of it, though I did have some minor issues getting it on because this part has slightly different sized holes than OE.
Alien Bitflipper
2025-06-26 16:37:12
This is a flange/receiver/attachment that holds a radius arm bushing, not really a bushing kit.New radius arm bushings fit great into this part. My old mounting flange had elongated holes due to privious bushing failure.This part DEFINITELY NEEDS DIFFERENT, STRONGER, LARGER BOLTS than what was supplied!The large metal part is great. Be sure that you research for the correct grade or class of fastener to use when attaching it to your truck. Be sure to use real locking and load distribution design nuts too. Most local hardware stores do not sell the sort of fastener that you need. Be careful not to confuse a Grade 8 bolt with a Class 8.8 bolt - consult an authoritative reference.No instructions, wrong bolts / nuts - minus a star. Othewise, puts life back into the old truck
walter collins
2025-06-25 17:33:38
Installed on a:1992 Ford F-150, XLT, Stepside Pickup.Item fit like a glove, we didn't have to drill anything out at all.We were done in 45 minutes start to finish.This is for the right side.
Sully
2025-06-12 10:27:24
The forward top hole did not match up with the stock frame rail hole.Other than that great price for the item.
Gilles Beauvais
2025-02-14 12:17:28
Great product
Customer
2025-01-22 13:36:58
fits great. thx
Christopher Brown
2024-12-28 12:40:47
Exactly what i needed
Recommended Products
$495.00
$ 99 .00 $99.00
$37.17
$ 17 .99 $17.99