Your cart is empty.
Your cart is empty.Moog Problem Solver products incorporate proven design and engineering features for like new steering, ease of installation and longer life. Moog is the preferred steering and suspension brand of professional technicians and NASCAR Crew Chiefs.
‘Yota fan
2025-09-06 18:06:53
Perfect OEM fit, very durable, cost less than half what a factory Toyota swaybar link costs, and it works great with my 3 inch suspension lift (full package with shocks, springs, UCA’s, adjustable rear sway bar links, and adjustable rear trac bar from Iron Man 4x4 America. I replaced the front swaybar bushings with Moog parts as well. I replaced both sides on my 2008 Toyota 4runner limited V8 4 x 4 in action in the video. Solid & quiet, but just like the oems, these have no grease zerts on them, just like most parts sold today.
Kendall Hess
2025-09-02 11:37:33
Fits my 07 FJ fine. Definitely noticed a difference after replacing the old ones (140,000 miles). These also are a far better design than the original part because you can use a wrench to hold the back side while tightening or loosening the nut. The original ones have a hex slot inside of the threaded shaft which will either break or strip if you haven't had them off recently. I had to cut the nut off of my originals and replace them for this reason while replacing my struts.
N. McCann
2025-08-18 12:00:24
FIT ME 4RUNNER GOOD
SilverRSMFJ
2025-08-16 15:34:43
Great replacement for my 2010 FJ stock front sway bar links. One of them started leaking recently after replacing the link with Toyota ones for a 2nd time, the stockers are weak, and once you lift your FJ 3" and do aggressive offroading, the stockers are not going to hold, decided to look into aftermarket for better ones, and found the Moog replacements are way stronger, so far so good, and zero issues with them, perfect fit, plus they have greasable bushings.
Jacob Kovalchik
2025-08-15 15:55:29
Easy enough to install. Disappointed they rusted so fast, especially considering I live in Arizona. Before you install them, hit them with some rustoleum spray paint.
Allen
2025-08-10 11:30:58
for my 12fjcruiser, the new ones mentioned wrench flat for holding the link when i ratched the nut in but I don’t see it. I had to use a torx bit to hold down each bolt shaft to install the nut. it was time consuming, satisfied with the purchase and outcome.
The billy goat
2025-08-02 19:07:48
I’ve had these on for about 3 months and they are starting to rust really badly. The quality seems good but the coating (or lack there of) is quite poor.
Rain Man
2025-07-24 16:53:00
After replacing the upper and lower control arm bushings, sway bar bushings, and upper and lower ball joints there was still a clunking noise when going over small bumps. Decided to replace the sway bar end links since the seals were cracked and the only thing I didn't replace. The noise is now gone and the truck drives like new again. This was all completed on an 06 Toyota 4runner V8.
Sherry Doerr
2025-07-07 18:00:37
perfect
Alex Ustyugov
2025-07-01 17:58:17
I bought 2 as found no position to install in the description. Wrong. Another part No: K90677 is needed now for my T4R's front left side.
Jeff
2025-06-25 18:42:27
Purchased both left an right side sway bar links for my 2007 FJ Cruiser to replace worn OEM parts. Install very easy. Noticed a difference right away. All good I thought until I helped a friend replace his on an 2007 4Runner - same part number and fitment. He purchased his Moog sway bar links from an auto parts store locally. Here is the issue. His are greaseable mine are not. Moog website pictures show greaseable zerks on part and indicate in literature, Amazon does not. Packaging box for my amazon parts is slightly different than what my friend purchased - colors off and slight font difference in text. Mounting hardware different and different size. Visual comparison of finish and appearance is off. Pretty confident I did not get an original Moog part. Moving forward 2 years my sway bar links now have to be replaced again. Joints move both up, down and side to side with an audible metallic clunk at times. These parts lasted 31 thousand KM over 2 years. Who ever is supplying these to Amazon is pulling a fast one. This seems to confirmed by others questioning the same thing. My advice would be to compare what you receive to the pictures on the Moog website before installing. My bad for not doing this in the first place myself.Fortunately, the install is easy and I have ordered replacements - not from Amazon this time.
Xborder
2025-06-15 12:33:25
It comes with a Moog box, however, I don't see the made-in-Japan stamp on the product as other reviewers said. Please see my posted pictures. Even in the one-page instruction, nothing related to the Moog. Anyone can confirm if it is a genuine Moog? Anyway, installed with no problem. time will tell the quality.
Jessica
2025-06-06 15:38:24
Original ones lasted 270k these. These lasted 19k or 11 months. Won't recommend.
‘Yota fan
2025-05-07 16:10:10
Perfect OEM fit, very durable, cost less than half what a factory Toyota swaybar link costs, and it works great with my 3 inch suspension lift (full package with shocks, springs, UCA’s, adjustable rear sway bar links, and adjustable rear trac bar from Iron Man 4x4 America. I replaced the front swaybar bushings with Moog parts as well. I replaced both sides on my 2008 Toyota 4runner limited V8 4 x 4 in action in the video. Solid & quiet, but just like the oems, these have no grease zerts on them, just like most parts sold today.
Kendall Hess
2025-05-02 11:46:20
Fits my 07 FJ fine. Definitely noticed a difference after replacing the old ones (140,000 miles). These also are a far better design than the original part because you can use a wrench to hold the back side while tightening or loosening the nut. The original ones have a hex slot inside of the threaded shaft which will either break or strip if you haven't had them off recently. I had to cut the nut off of my originals and replace them for this reason while replacing my struts.
N. McCann
2025-04-30 10:13:12
FIT ME 4RUNNER GOOD
SilverRSMFJ
2025-04-17 19:38:01
Great replacement for my 2010 FJ stock front sway bar links. One of them started leaking recently after replacing the link with Toyota ones for a 2nd time, the stockers are weak, and once you lift your FJ 3" and do aggressive offroading, the stockers are not going to hold, decided to look into aftermarket for better ones, and found the Moog replacements are way stronger, so far so good, and zero issues with them, perfect fit, plus they have greasable bushings.
Jacob Kovalchik
2025-04-08 16:39:42
Easy enough to install. Disappointed they rusted so fast, especially considering I live in Arizona. Before you install them, hit them with some rustoleum spray paint.
Allen
2025-02-18 12:52:04
for my 12fjcruiser, the new ones mentioned wrench flat for holding the link when i ratched the nut in but I don’t see it. I had to use a torx bit to hold down each bolt shaft to install the nut. it was time consuming, satisfied with the purchase and outcome.
The billy goat
2025-02-08 10:47:59
I’ve had these on for about 3 months and they are starting to rust really badly. The quality seems good but the coating (or lack there of) is quite poor.
Rain Man
2025-01-31 14:02:49
After replacing the upper and lower control arm bushings, sway bar bushings, and upper and lower ball joints there was still a clunking noise when going over small bumps. Decided to replace the sway bar end links since the seals were cracked and the only thing I didn't replace. The noise is now gone and the truck drives like new again. This was all completed on an 06 Toyota 4runner V8.
Sherry Doerr
2025-01-29 11:29:00
perfect
Alex Ustyugov
2025-01-28 18:18:21
I bought 2 as found no position to install in the description. Wrong. Another part No: K90677 is needed now for my T4R's front left side.
Jeff
2025-01-13 16:13:27
Purchased both left an right side sway bar links for my 2007 FJ Cruiser to replace worn OEM parts. Install very easy. Noticed a difference right away. All good I thought until I helped a friend replace his on an 2007 4Runner - same part number and fitment. He purchased his Moog sway bar links from an auto parts store locally. Here is the issue. His are greaseable mine are not. Moog website pictures show greaseable zerks on part and indicate in literature, Amazon does not. Packaging box for my amazon parts is slightly different than what my friend purchased - colors off and slight font difference in text. Mounting hardware different and different size. Visual comparison of finish and appearance is off. Pretty confident I did not get an original Moog part. Moving forward 2 years my sway bar links now have to be replaced again. Joints move both up, down and side to side with an audible metallic clunk at times. These parts lasted 31 thousand KM over 2 years. Who ever is supplying these to Amazon is pulling a fast one. This seems to confirmed by others questioning the same thing. My advice would be to compare what you receive to the pictures on the Moog website before installing. My bad for not doing this in the first place myself.Fortunately, the install is easy and I have ordered replacements - not from Amazon this time.
Xborder
2025-01-07 11:26:14
It comes with a Moog box, however, I don't see the made-in-Japan stamp on the product as other reviewers said. Please see my posted pictures. Even in the one-page instruction, nothing related to the Moog. Anyone can confirm if it is a genuine Moog? Anyway, installed with no problem. time will tell the quality.
Jessica
2024-12-25 10:26:51
Original ones lasted 270k these. These lasted 19k or 11 months. Won't recommend.
Recommended Products
$24.06
$ 10 .99 $10.99
$17.58
$ 7 .99 $7.99