Your cart is empty.
Your cart is empty.Product Description
MOOSUN Performance Cold Air Intake Kit
Applicable vehicle
Fit for 2002-2006 Cadillac Escalade with 5.3L/6.0L V8 Engine
Fit for 2002-2006 Avalanche 1500 with 5.3L V8 Engine
Fit for 2000-2006 Suburban 1500/2500 with 5.3L/6.0L V8 Engine
Fit for 2000-2006 Tahoe with 4.8L/5.3L V8 Engine
Fit for 1999-2006 Silverado 1500 / 1500 HD with 4.8L/5.3L/6.0L Engine
Fit for 1999-2006 Silverado 2500 / 2500 HD with 5.3L/6.0L V8 Engine
Fit for 2001-2006 Silverado 3500 with 6.0L V8 Engine Fit for 2003-2006 Silverado SS with 6.0L V8 Engine Fit for 1999-2006 GMC Sierra 1500 / 1500 HD with 4.8L/5.3L/6.0L V8 Engine Fit for 1999-2006 GMC Sierra 2500 / 2500 HD with 5.3L/6.0L V8 Engine
Fit for 2002-2006 GMC Sierra Denali with 6.0L V8 Engine
Fit for 2001-2006 GMC Yukon Denali with 6.0L V8 Engine
Fit for 2001-2006 GMC Yukon Denali XL with 6.0L V8 Engine
Fit for 2002-2006 GMC Yukon Denali XL 1500 with 5.3L V8 Engine
Fit for 2002-2006 GMC Yukon Denali XL 2500 with 6.0L V8 Engine
Please MATCH your vehicle on the left top before purchasing
Package Content
- High Flow Air Filter
- Smooth Intake Pipe
- Silicone Coupler
- Hose Clamp
- The cold air intake kit comes complete with everything necessary for installation
Dry Air Filter
Each intake kit comes with a huge, highly-efficient air filter which results in better performance and better protection for your engine.
Most new design are now dry filter instead of oil filter. Our filter do not require oil, it is reusable and washable. You can wash it with soap and water, rinse it until it is all dry up and use it again. We recommend you to check every 5,000 miles to see if it needs to be wash / clean.
Premium Silicone Components
Silicone is a premium rubber which seals better and lasts longer. The air filter, couplers and tube seals in our intake kits are made from our premium silicone rubber. This means they won't crack, has exceptional tear strength, and can handle temperatures as high as 400F. Also, with a high friction surface and no oily residue, our silicone filters and couplers won’t slide off the tube.
Easy to Install with Basic Hand Tools
MOOSUN air intakes are very easy to install on your car or truck. A typical air intake installation can be done with a screwdriver, pliers and a ratchet-set in 90 minutes or less!
MOOSUN specifically engineers their intake kits to use existing factory holes and mounting points, making installation simple. The vast majority of MOOSUN cold air induction systems do not require any cutting or drilling.
Our air intake
- Cold air allows to burn fuel more efficiently, comparing to hot air.
Protect Your Engine
- Multiple filtering protection engine
- Increase power high efficiency air intake
- Smooth flow enhance response
- Not afraid of moisture effectively prevent the breakdown of the air filter
Your Engine will GROWL
- A satisfying growl upon acceleration, yet quiet once at speed. Removes stock baffles and soundproofing components from the engine bay.
How to install a MOOSUN High Flow Intake Kit
Step 1 - Make sure your engine is cool to the touch.
Step 2 - Disconnect your battery cable from the negative terminal.
Step 3 - Remove your old air intake.
Step 4 - Attach the silicone coupling that came with the air intake kit to the throttle body.
Step 5 - Secure the coupling by tightening a hose clamp at the end.
Step 6 - Place another hose clamp on the front of the coupling, but don’t tighten it just yet.
Step 7 - Slide the intake tube into the silicone coupling, and ensure that your intake pipe is running from the throttle bay away from the engine bay.
Step 8 - Tighten the silicone coupling and secure all brackets on the tube.
Step 9 - Plug the mass air flow sensor into the new cold air intake system.
Step 10 - Reconnect the battery.Enjoy the new power boosts immediately!
stephen
2025-07-24 11:47:38
I bought this part for my 2001chevy suburban it was very easy to install and when I turned on after installing it it sounded better than I went to test drive and it had a lot more torque and power. thanks ðŸ‘
David o Farley
2025-07-11 16:04:26
The fitment was close, didn't have to trim or anything, just had to bend the lower mount a little bit, bracket to hold radiator hos was off a bit but who uses all those mounts anyhow???!!! Lol jk I'll find a way to get it attached so the hose doesn't wiggle. Great product and cheap too!
Angie McCaulley
2025-07-01 17:20:05
This cold air intake is the exact same as a K&n at a fraction of the cost. Yes, I know I put the wrong logo on. It's a troll. The only difference in quality would be the filter by K&n which you can pick up cheap. To me, it's the same filter. This is such a great deal for the money. My truck is so responsive now. I press the throttle and the response is instant. No more hesitation. Not sure if I gained horsepower, or torque. Don't really care. My gas mileage went up, that's all I care about. Btw, took all of 10 minutes to install.
michael
2025-06-22 13:49:55
The quality of construction and value is great. The fit is not perfect and requires some good mechanic skill. The instructions are lacking. Several OEM parts must be reused but the instructions does not tell you how to make them fit. I like the Chevy orange boots for my Silverado to match the new orange plug wires. I have an overall butter engine performance, plus chrome.
Lonzo S.
2025-06-12 13:58:31
I absolutely love the new up to date air filter . It gives my truck a pleasant look when I pop the hood up. I will mention, this wasn't an easy install. It took me fairly an hour, doing it alone. After following the instructions provided on a YT video that I looked up, I was able to get it installed nice and snug and it gives my truck a little bit more umph and a nice sound as well. I definitely recommend this product. Not to mention, it's cheaper than many of the retail store's prices.
Logan Laney
2025-06-09 13:48:59
It works as intended! Fitment wasn’t 100% perfect. But with a little tweaking it went in just fine. Honestly think if the filter was a tad shorter install would be way easier , as the filter is a little over kill lol!
randall horner
2025-05-09 10:51:57
Fit real good, actually you can tell it's there, easy to install, priced right.
James Pate
2025-04-26 18:02:55
The tube seemed to be to short, or the bracket to the damper was welded on wrong. Overall it didn't really fit well
Manuel ledezma
2025-03-01 16:04:18
No me gustó el calibre, es más delgado que otra marca, los Coples no son firmes, solo me agradó el puro filtro.
Gav
2025-01-31 18:47:44
Decent for the price, nothing special, fits well
Donald Clifford
2025-01-28 18:42:20
Did a perfect job
Jonathon Wyatt Bushey
2024-12-27 20:51:07
It fits ish and the filter’s huge. The bottom bracket for the tube that connects to the box doesn’t work at all. The rubber hoses and clamps are pretty cheapy. And honestly the box and seals don’t fit proper without drilling/cutting but for $95 cad I’m still not complaining… it sounds cool and seems like it picked up power
Jackson
2024-12-14 11:05:24
good for the price
Recommended Products
$31.99
$ 13 .99 $13.99