Your cart is empty.
Your cart is empty.Product Description
- Mornjina misting system is widely used in shopping mall, park, artificial landscape, factory, workshop dry area, can effectively suppress dust, deodorize and improve the environment.
- Spray accessories are mainly used for spray cooling system, cooling, deodorization, humidification, watering, dust removal, gardens, irrigation systems, courtyards, gardens, swimming pools, playgrounds etc..
Installation Step:
- Take the 3M water hose and water inlet filter and put the filter into the water tank totally.
- Fit Misting Nozzles and end plug with Nozzle Fittings.
- Take the black pump, connecting one side with 3M water inlet and another side with 18M misting system.
- Connect power adapter with pump and turn on the power to operate the system for 1 minute to discharge the air inside.
- Check the whole system carefully to ensure there is no water leakage after the system start to work.
- Fix the misting lines by the cable ties and saddle clamps provided.
- Turn on the Power and then enjoy the misting cooling system.
Note : Water leakage proof tape is recommended if found anywhere with water leaking.
Specification
- The Tubing Length between the first mister to the last mister: 49 FT / 15 Meter.
- The tubing length between filter and pump: 11.48FT / 3.5 Meter.
- The tubing Length Between Misters: 29.55inch / 75cm.
Misting Cooling System Accessories
- UV-resistant Misting Hose
- 49FT(15M) hard PE tubing is UV-resistant, leak-proof and anti-rust.
- Water Pump with Power Adapter (Including U.S. regulatory 3-plug conversion head).
- Equipped with 12V 5A 60W AC / DC power adapter; working pressure: 0.8MPa; flow rate: 5L / min. Atmospheric pressure 30PSI (2-3kg); maximum working pressure: 30bar (450psi).
- Filter Szie: 8x3cm / 3.15x1.18inch.
- 20Pcs T-tube Connectors.
- 20Pcs Brass Misting Nozzles Heads, Removable.
- Orifice Nozzle Diameter: 0.4mm (0.016"), thread size: UNC10-24, working pressure: 0.8MPa, flow rate: 5L / min.
- Connect to 3/4 inch (25mm) pipe
- 1Piece Pipe Cutter.
- Cut the hose to any length you like.
- 50pcs Cable Ties.
- 50pcs Saddle Clamps.
- 1 Piece PTFE Tape.
Hose Installation
Step1
- Cut the hose in the right length.
Step 2
- Insert the the hose end to the faucet adapter.
Step 3
- Insert the hose end to the Tee-nozzle.
Step 4
- Insert the misting nozzles on the T-tube pipe.
Wide Application
- Dust Removal in Artificial Landscape
- Watering in Courtyards, Gardens.
- Cooling Outdoor.
- Cooling in Playground, Swimming Pool.
David C.
2025-07-31 16:58:43
When I got this, I was pleased to see the misters were already attached to the 1/4" line and all I had to do was screw in the brass nozzles. Since I wanted to install this in my greenhouse to provide cooling, I decided to uncoil the drip line and attach the pump to see how well the jets sprayed/misted on the ground. I put the filter in a bucket of water and tuned on the pump. I waited over 10 minutes and the first ten misters were spraying (not misting) and the remaining 16 were only dripping at most, due to downstream pressure loss. I was disappointed as it seemed the pump was not powerful enough. I contacted the seller and no response.I started looking at other reviews to see what other folks said and if they had the same problem. In my opinion, I either had a bad pump or the system does not work for more than a few jets. Finally, I saw someone had the same problem and found out that the water source needed to be higher than the pump. That simple. Once I put the water bucket two feet above the pump, ALL of the jets started to mist. Success! It is too bad this was not noted in the instructions. I wonder how many people just ended up returning the system not knowing how it needs to be set up. So I am thrilled that it is working and it does drop the temperature in my greenhouse quickly when operating for just a few minutes, which was my objective. I have the motor plugged into an Inkbird temperature controller that I set at 80 deg to turn on the misters.A few more notes. The drip line that was provided is more firm/sturdy then the typical drip lines. Plenty of straps and fasteners are provided. The only struggle I had was attaching both lines to the pump. It seems like the threads were to tight or out of tolerance. Be sure not to cross-thread them. Push it hard to get it started straight and then you will be fine. As others said, the motor is noisy even with the rubber feet and I even put it on a 2" piece of hard styrofoam and it did not help much. Given my greenhouse is away from my house, that is not a problem but it would be annoying if you have an overhead canopy and are trying to keep cool and talk to other people while the motor is running. The manufacturer should work on a more quieter pump and this would be perfect.
Jon B
2025-06-10 17:04:58
If Amazon is going to allow sellers to list stuff like this, they really should allow the awarding of negative stars. This is not a mister; it is a dripper. Basically, the "mister" holes are too large. As a result, (a) the water is delivered in drops rather than a mist and (b) the pump will not deliver sufficient flow to even get water to the most distant several outlets. Don't know if this is a result of no quality control or don't- give-a-damn design. Either way, it's going back.
J.
2025-06-06 12:59:07
I’ve troubleshooted this for over an hour and a half. I can’t get the pump to prime, it rattles like crazy which is not normal. This pump should operate relatively quietly. Tried the plumbing tape, gaskets, adjusting the height of the motor to the siphon end, etc. Could not get it to run as designed for more than 10 seconds at a time. Will be returning.Edit: for unknown reasons, the pump finally primed itself and now works. It is a bit louder than I would like, but does exactly what I need it to do. Changing my review to four stars.
Nicholas Buchholz
2025-06-04 18:09:40
Took awhile to prime pump but we got it working
A
2025-06-01 10:49:14
It works but it's insanely loud
chouquers
2025-05-28 13:09:16
This system is junk the pump never worked from brand new . Tried everything to get it pumping but the water just barely trickles out . I’ll be returning it when I have time to take everything down that I hung . Oh and the clips your supposed to use to hang the line are weak and the nail is to short they just fall out
Anoniempjexoxo
2025-05-11 13:48:24
Good product, does wat its supposed to do. Only downside is that the hose comes pre cut. Good to know is that the pump has a built in pressure discharge valve.
Christina
2025-04-27 15:53:01
The noise my God it is loud!!! I wish I knew this before, missed my return date by 4 days. Very disappointed, indoor use yeah right its at my back door and I can hear it from my front door
Cliente de
2025-03-07 16:13:55
Llegó usado, con agua dentro de la bomba y el adaptador de corriente quemado. Sustituà el adaptador de corriente y la bomba apenas tiene potencia para producir goteo.
رائع
2025-02-20 17:13:13
أوجد جو من الانتعاش
Chris
2025-02-14 10:45:04
Power supply for the pump doesn't work at all
Mohamed Al Mazrooei
2024-12-24 14:03:51
سهل التركيب والاستخدام ودÙعه للماء ممتاز
Recommended Products