Your cart is empty.
Your cart is empty.Oil Dipstick, Braided Stainless Flex Tube With 1/4inch NPT Fitting Included Will Fit BBC Oil Pans
Mr Plow
September 6, 2025
Really nice dipstick. The flexibility allows you to mount it in many different positions. Well made.
Customer
September 5, 2025
Great product.
Randall gale Kirkman
August 30, 2025
You cannot get the set screw on the knob loose so you can't take the dipstick out itself and cut it to use the factory markings on the bottom of the stick I think Moroso should send me another one anyway I know that's not going to happen next time I'll just get milodon thanks for nothing
NJguy
August 28, 2025
Installed this to retrofit my BMW 135i track car with a custom dipstick. Chased a leak for a while and finally found this was the cause of the leak. Oil was leaking from the compression cover that squeezes the plastic/metal mesh tube against the adapter to 1/4" npt fitting. decided to ditch it all together. quality worse than expected.
Defective
July 27, 2025
This item should not be used. Plastic from inside of dipstick tube come off on the dipstick and could easily be falling in the oilpan. This is far from a quality product and absolutly pathetic for $71. Should be 0 stars
Customer
July 2, 2025
Tried this dip stick on a moroso road race oil pan on a sbc and the angle for the stick to go into the pan is too drastic, making it impossible to slide the stick all the way through because the tip of the stick catches on part of the fitting.
Coreo
June 17, 2025
A perfect fit for my moroso oil pan! And a Perfect fit for my 1959 mercury project!
milano decarolis
June 4, 2025
This is a nice dipstick but the o-ring fit is too loose and keeps popping out causing oil leakage in the engine bay. I have tried increasing my breather size on my engine and I still have the same problem. I wouldn't recommend.
Mr Plow
May 26, 2025
Really nice dipstick. The flexibility allows you to mount it in many different positions. Well made.
Customer
May 18, 2025
Great product.
Randall gale Kirkman
May 13, 2025
You cannot get the set screw on the knob loose so you can't take the dipstick out itself and cut it to use the factory markings on the bottom of the stick I think Moroso should send me another one anyway I know that's not going to happen next time I'll just get milodon thanks for nothing
NJguy
April 14, 2025
Installed this to retrofit my BMW 135i track car with a custom dipstick. Chased a leak for a while and finally found this was the cause of the leak. Oil was leaking from the compression cover that squeezes the plastic/metal mesh tube against the adapter to 1/4" npt fitting. decided to ditch it all together. quality worse than expected.
Defective
March 11, 2025
This item should not be used. Plastic from inside of dipstick tube come off on the dipstick and could easily be falling in the oilpan. This is far from a quality product and absolutly pathetic for $71. Should be 0 stars
Customer
February 21, 2025
Tried this dip stick on a moroso road race oil pan on a sbc and the angle for the stick to go into the pan is too drastic, making it impossible to slide the stick all the way through because the tip of the stick catches on part of the fitting.
Coreo
February 18, 2025
A perfect fit for my moroso oil pan! And a Perfect fit for my 1959 mercury project!
milano decarolis
February 14, 2025
This is a nice dipstick but the o-ring fit is too loose and keeps popping out causing oil leakage in the engine bay. I have tried increasing my breather size on my engine and I still have the same problem. I wouldn't recommend.
Recommended Products
$138.95
$ 65 .99 $65.99
$29.94
$ 15 .99 $15.99
$141.95
$ 64 .99 $64.99