Your cart is empty.
Your cart is empty.Product Description
Texas Rancher
2025-09-06 18:05:04
2003 Ford EB Expedition 4.6l engine.Solved the infamous EGR differential pressure sensor problem!!!! Original EGR differential pressure sensor disintegrated and fell apart when I changed spark plugs 2 years ago. Since then, it's been a constant stream of EGR differential pressure sensor failures, 9 at last count, mostly just to pass EPA inspections. Up to now, all replacement EGR diff sensors were expensive FOMOC or Morocraft OEMs. All failed, most with internal water. Additionally, I replaced the sensor hoses/ tubes, cleaned and almost replaced the exhaust EGR differential pressure tube, and even replaced the pigtail connector (cause I was working on it so much it eventually broke).In any case, I solved the EGR differential pressure sensor issue that has confounded Ford engineers for 22 years. And I did it with the cheapest, Amazon sourced, generic, non-OEM, Chinese-made crap differential pressure sensor available on Amazon!!
Ted Hoff
2025-08-24 14:36:17
This was an easy install on my 2000 Ford E150 (4.2l V6). Found on the passenger side, under the air cleaner (must remove air cleaner to access), mounted on a bracket immediately behind the alternator. It’s as simple as one plug, two nuts, and two hoses. The whole job took 7 minutes with tool clean up; and a restroom break. I reset the codes with a code scanner, drove 800 miles, and no issues. This product was cheap and the performance is all Aces. Buy now.
Customer
2025-08-11 18:42:05
Not sure if I even needed it? But I was getting codes for a bad ERG Valve so I decided to change the exhaust sensor and solenoid. Might as well seeing that those part are reasonably priced. I'd hate to change the EGR Valve just to get another bad code.
M. Dimoff
2025-05-01 14:22:23
Sensor was extremely easy to install and has worked perfectly. It would have been much more costly to go to a shop. Even going to a local parts store would have jacked up the overall cost. Very pleased. Not sure what happened to the guys showing melted devises, but I have had no problems.
John Duke
2025-03-22 13:38:58
Is what it is, no more no less.
bob
2025-02-11 14:12:17
Did not work at all.
Charles P.
2025-01-30 11:28:10
No good stick with motor craft
P. Conway
2025-01-11 11:18:10
The EGR Valve Pressure Feedback Sensor arrived earlier than expected, was easy to install and appears to be working as it should, No more OBD II code.
Recommended Products