Your cart is empty.
Your cart is empty. Description：
Condition: New
Manufacturer Part Number: 600-202
Replaces Part Number: 4882682, 4506116
Shelf Description: 4WD Actuator
Compatible with:
Fit for Dodge RAM 1500 PICKUP 3.9L V6 1994-2001
Fit for Dodge RAM 1500 PICKUP 5.2L V8 1994-2001
Fit for Dodge RAM 1500 PICKUP 5.2L V8 OHV 2000
Fit for Dodge RAM 1500 PICKUP 5.2L V8 SOHC 2000
Fit for Dodge RAM 1500 PICKUP 5.9L V8 1994-2001
Fit for Dodge RAM 2500 PICKUP 5.2L V8 1994-1996
Fit for Dodge RAM 2500 PICKUP 5.9L L6 DIESEL Turbocharged 1994-2002
Fit for Dodge RAM 2500 PICKUP 5.9L V8 1994-2002
Fit for Dodge RAM 2500 PICKUP 5.9L V8 OHV 2000
Fit for Dodge RAM 2500 PICKUP 5.9L V8 SOHC 2000
Fit for Dodge RAM 2500 PICKUP 8.0L V10 1994-2002
Fit for Dodge RAM 3500 PICKUP 5.9L L6 DIESEL Turbocharged 1994-2002
Fit for Dodge RAM 3500 PICKUP 5.9L V8 1994-2002
Fit for Dodge RAM 3500 PICKUP 8.0L V10 1994-2002
Fit for Dodge W150 PICKUP 3.9L 239cid V6 1990
Fit for Dodge W150 PICKUP 3.9L V6 1991-1993
Fit for Dodge W150 PICKUP 5.2L 318cid V8 1990
Fit for Dodge W150 PICKUP 5.2L V8 1991-1993
Fit for Dodge W150 PICKUP 5.9L 360cid V8 1990
Fit for Dodge W150 PICKUP 5.9L V8 1991 1993
Fit for Dodge W250 PICKUP 5.2L 318cid V8 1990
Fit for Dodge W250 PICKUP 5.2L V8 1991-1993
Fit for Dodge W250 PICKUP 5.9L 359cid L6 DIESEL Turbocharged 1990
Fit for Dodge W250 PICKUP 5.9L 360cid V8 1990
Fit for Dodge W250 PICKUP 5.9L L6 DIESEL Turbocharged 1991-1993
Fit for Dodge W250 PICKUP 5.9L V8 1991-1993
Fit for Dodge W350 PICKUP 5.9L 359cid L6 DIESEL Turbocharged 1990
Fit for Dodge W350 PICKUP 5.9L 360cid V8 1990
Fit for Dodge W350 PICKUP 5.9L L6 DIESEL Turbocharged 1991-1993
Fit for Dodge W350 PICKUP 5.9L V8 1991-1993
Fit for JEEP CHEROKEE 1991-1993
Fit for JEEP COMANCHE 1991-1992
Fit for JEEP WRANGLER 1991-1995
Matthew Yucus
June 27, 2025
01 ram 1500, brass insert part attached to the vacuum chamber that has the o-ring that seals to the actuator housing was considerably too large in diameter to fit into aluminum housing. I had to use a small round metal file to enlarge housing hole, used rtv along with the o-ring to seal. Also, the vacuum ports are angled away from each other so had to saw the truck side vacuum "harness" completely down the center so it could fit each line separately. Could be built better for each specific vehicle, but it was cheap and works good.
Albert
June 20, 2025
Do not buy this. It will not fit into housing. Not happy, because my truck is down. Paid a lot more money for one that will work.
Dr. Dodge
May 19, 2025
Lots of assumptions on the manufacturers part and mineEnded up junking it
Guy
May 9, 2025
Actuator shaft is to fat to fit into housing. Couldn't use
David Lucas
May 3, 2025
Shaft into old housing needed to be pressed in. VERY tight fit. The vacuum line harness also did not fit. I had to split the harness to put the lines on. Also, the hardware only included 2 Clips where 3 are required. Went to Tractor Supply to get the other small C-clip. It does not fit right but you can make it work.
PB
April 11, 2025
Does not fit a 2000 Dodge Ram 1500. The shaft diameter is larger than the original. It will not fit into the actuator housing.
SNOZ
March 3, 2025
this actuator does not fit my 98 Dodge Ram 2500 3/4 ton 4x4, the shaft is too short to move the fork far enough to engage the 4 wheel drive and is not long enough to activate the 4 wheel drive sensor
N/A
January 14, 2025
Did not fit even tho it was a "exact fit" would not recommend. Noticably different parts then the original
pierre.marquis
December 22, 2024
Dodge Ram 1994 J aime
Recommended Products
$31.99
$ 13 .99 $13.99