Your cart is empty.
Your cart is empty.Upgraded design for a stronger build and increased compatibility Universal design - will mount any microphone or recorder with a 1/4" thread Attaches to most cameras via standard hot shoe or tripods via 1/4" thread Discreet, low-profile design Minimize the impact that handling noise can have on a recording The Movo SMM5 is the perfect shock mount and support for your Zoom portable recorder or other digital microphones. The microphone and recorder shock mount features a four-point suspension system to minimize the impact that handling noise can have on a recording. The MovoSMM5 shock mount has a universal design and will mount any microphone or recorder with a 1/4" thread. Available in the color black or red. Specifications Construction:Flexible ABS Upper; Aluminum Camera Shoe Mic/Recorder Mounting Thread:1/4"-20 male mounting thread Shoe Mounting Options:Standard Camera Shoe or 1/4"-20 female thread Dimensions (LxWxH):3.4" x 2.6" x 2.6" (8.6 x 6.6 x 6.6cm) Weight:1.95 oz (55g)
Jouni-Mikael Turpeinen
2025-06-10 17:14:26
Works well with my Tascam X6. Does not need extra adapters since it comes with a detachable hot shoe mount with a 1/4 nut and a 3/8 nut in its self. I can mount it on my camera or a microphone stand.It removes most of the handling noises.
Ren
2025-06-08 13:39:06
I use this for my tascam 05x and didn't expect much from it, but it's built very well and the quality feels great. It wound up cancelling a lot of vibrations that the recorder would constantly pick up. 10/10 recommendation for vibration interruptions! Works on a number of different mounts too which is very handy.
Dickie T
2025-05-31 16:38:02
Nice little isolation mount. It works fine.
Oleg Ovechkin
2025-05-28 17:11:06
I own a couple of these shock mounts and use them with Zoom H5 and Sony PCM-D100 recorders. The Movo SMM5 does what it is supposed to do: noticeably reduces handling (aka mechanically transferred) noise. I have taken mine to a dozen of field recording outings. So far, they are holding up pretty well: plastic parts look intact, all screws are in place, and the rubber pad on top is still grippy and properly attached to the base.Pros:* Effective in isolating the mechanically transferred noise* Materials and construction are adequate for the price. (Compare it to Rycote Portable Recorder Suspension if you wish 😉)* I like the sliding screw design of the recorder attachment. It really works securing a device at the balanced, center-of-mass positionCons:* I wish MOVO included 3/8" to 1/4" bushing. I use my SMM5's mounted on a tripod ball head, so a tiny 3/8" to 1/4" bushing would be a better alternative to the included bulkier cold shoe adapterNote: I have both Black and Red versions of the Movo SMM5. I am attaching photos of the Red version, but functionally they are exactly the same.
Reasonable Expectations
2025-05-17 14:44:51
I am backing all of my MOVO purchases so far.This shock mount is so solid. It has adjustment capabilities I would expect from a much more costly piece of gear. The mounting versatility is for almost anything you can think of an it works great.
vqworks
2025-04-12 21:41:22
When purchasing the Zoom H1n recorder, I had a choice of choosing a rigid one-piece mount for my digital camera or this Movo SMM5-B.I chose the latter because I wanted the flexibility of being able to position the recorder forward or backward relative to the camera. It certainly allowed for that. The slight springiness of this mount was slightly disconcerting when I mounted it to my camera but it is supposed to do that in order to reduce physical shock. It's also better for your camera's hotshoe. The best part is that my Zoom recorder didn't pick up any extraneous noises when recording through physical movement.So....5 stars!
Mcbeatty
2025-04-03 14:11:09
I wish the plastic as a bit sturdier
Steplander
2025-03-27 18:01:19
This mouth is well made and perfectly fits my Zoom H4N recorder. I like that it mouths in both my video cam and a tripod. The anti-shock design is really nice. Better than I thought it would be looking at the picture.Happy with this purchase
ADH
2025-03-18 10:06:01
This mount is a good match to flat base hand-held recorders with standard quarter inch mounting sockets such as the Zoom H series or the Tascams. The large supporting plate and screw fitting gives a much more secure and compact attachment than the more common "cat's cradle" designs, and this inspires confidence for field use. When fitted to the hotshoe on a camcorder, the raised shape of the mount means it doesn't interfere with operation of the rear controls.But is it effective? When testing it using a sound recorder fitted to tripod stand and inflicting some fairly hefty bumps and drags onto the stand, I found this mount was reducing the noise of the shock events by around 20db. In the same tests, the cat's cradle shockmount was achieving around 22db reduction, so the cats cradle is just slightly better than this mount at the loud end of the range but both designs are very effective when considering more realistic shocks. If you have used the Zoom H1 range, you will know that they are very susceptible to even light handling noise. Using this mount on a short pole completely eliminates that problem and greatly improves the handheld recording quality.This shock mount is well made, more practical than the traditional shock mounts, quick to set up, inexpensive, and highly effective. For me it has instantly become a must-have accessory for the H1 range. Highly recommented.
Samuel Morales
2025-03-17 10:46:46
The media could not be loaded.
Robert Vossen
2025-02-24 12:17:52
Zeer stabiel, geruisloos, perfect om geluidsopnames zonder storingen op te nemen
ML
2025-02-14 17:33:05
Ottimo supporto, ben rifinito!
Barry Callister
2025-02-09 19:59:48
Reduces the noise transmitted to my Zoom H6 created by touching the tripod when panning or tilting during video recording. It's amazing how much it cuts down the noise.
Recommended Products
$89.00
$ 34 .99 $34.99
$47.95
$ 24 .99 $24.99