Your cart is empty.
Your cart is empty.E. Johnson
2025-09-03 15:23:45
These blanks might be the right size for your guitar, but I needed to trim them down for mine (which needs to be 2.5" long). The bone cuts very easily with a fine tooth saw, and sanding the bottom to get the height right is pretty easy with medium grit sandpaper (although a bit tedious). Holding it in a clamp while you are sanding makes the job more comfortable. The quality of the sound compared to the original plastic bridge is night and day better. They come in 2's for a reason - you can't go backwards if you take off too much. You may need to sand the top to change the profile to match the curve of your fretboard which is a bit trickier, but worth the effort. A great project to improve your guitar and these blanks are good quality at a fair price.
Gary Groat
2025-07-30 17:35:05
As described. I get much better resonance from bone over plastic.
pemdasefx
2025-06-27 18:57:34
The saddle was thicker than the one I was replacing on my classical guitar (Esteve 7SR). I needed to sand it down quite a bit to make it fit. It's worked out fine for me.
Gee Gnome
2025-06-10 17:53:55
Grestch Guitalele factory saddle and action are too low, the factory stings are too light and there's fret buzz all they way up the neck. This saddle did the trick, easy install, no sanding or shaping at all. Just loosened the strings popped the factory saddle out and this new saddle in and, walla, no buzz. Arrived two weeks early as well, great price and quick shipping over the holidays.
jthut13
2025-06-09 15:42:28
With a little bit of sanding this bone saddle was a great upgrade to the plastic saddle the guitar came with
Customer
2025-06-07 20:37:04
good product.
Noah L
2025-05-13 10:36:00
Measurements were exactly as specified. Yes you may have to shape it a little. This one has a slight radius and will match a radiused fretboard better. After a little sanding to narrow and shorten it, this fit my Cordoba Crossover perfectly.
ari
2025-04-05 10:33:19
Something seemed off with this saddle. I dont know if my original saddle is bone but i know it is certainly better than this quality.
Cliente
2025-03-24 14:09:41
todo perfecto
walbedo
2025-03-18 16:28:36
I was actually looking for a good priced bone bridge saddle part for an acoustic bass guitar rather than plastic. Here you get two. Particularly for my bass I had to cut it to length and file it to my requirements. It was great to work with and now fits my bass perfectly and as low as I had wanted. Being bone it is tough, harder and improves the acoustic sound.
JOSE C.
2025-03-02 15:07:44
Voici les caractéristiques des deux sillets en os que j'ai reçu et qui étaient conformes à la description.Hauteur 9mm (bas plat et haut arrondi - mon sillet plastique fait 7mm de haut)Largeur 80mm (mon sillet plastique fait 56mm)Epaisseur 3mm (mon sillet plastique fait 3mm)Sillets bien lisses et sans défauts apparents.Grace à une petite perceuse sans fil et un disque diamanté j'ai pu ajuster la largeur et la hauteur.J'ai ensuite poncé le bas pour aplanir de façon à ce que le contact avec le sillet se fasse bien.N'oubliez pas de vous protéger avec un masque de bricolage à cartouches car la poussière d'os est extrêmement fine et passait un peu à travers mon masque simple ffp2 de bricolage.Précédemment il avait suffi de desserrer les cordes de mon ukulélé Shiver UCS-51, suffisamment pour pouvoir extraire le sillet plastique du chevalet car en general les sillets de chevalet ne sont pas collés. Je suis, par la suite, arrivé avec mon sillet en os, l'ai placé dans le chevalet, tendu et ajusté les cordes et .........super son, projection et sustain.Donc je donne 5 étoiles à ces sillets en os.
luigi di berardino
2025-01-25 16:11:46
Tutto ok…buona qualità di osso usata. attenzione Alle misure per la compensazione sulla coda di sol.
Customer
2025-01-24 13:03:36
Great item, just what I needed.
Recommended Products
