Your cart is empty.
Your cart is empty.Pulling bridge pins just got a whole lot easier, safer and more fun! MusicNomad's patent pending GRIP Puller's innovative design allows you to easily pull bridge pins. Simply slide under the pin to GRIP and pull straight up. Alternately, use a rocking motion to roll back and lift the pin. It’s that easy. The ergonomic, rubber lined comfort grip design has no moving parts and is a one-handed operation. Metal free construction with a rubber exterior makes it safe on delicate wood and all bridge pin types used on acoustic guitars. That's MusicNomad quality - raising the bar in equipment care.
DS Illinois
2025-09-03 18:23:56
Simplicity is sometimes the most overlooked thing in design. This little tool uses simple leverage to gently roll your pin up and out of the bridge of your acoustic guitar. If you need to get to the pin from another angle the curve has a "nub" on it to place your roll up just perfectly for your guitar bridge. No more accidental slips, damages, or beating up the pin. Very strong and comfortable to use.Amazing no one thought of this before. I'm glad a U.S. Company is inventing this stuff and delivering a quality, build even if it is built somewhere else. I'm tired of poorly made gadgets that don't work from other parts of the world - the good news is this one works well. On this tool I can't see anywhere it could fail or wear down.
Customer
2025-08-30 15:31:03
I bought this after putting several dents in my Alvarez-Yairi guitar top while trying to get the bridge pins out. This is the only bridge pin pulling tool I've found that works safely on the Yairi decoupled bridge design. Rest this thing on the guitar saddle and pivot down to reach the bridge pin. No more
jim p.
2025-08-26 11:26:21
Very easy to use and .removed stings I couldn't budge
VC Alabama
2025-08-21 11:40:21
I usually loosen the strings and reach through the sound hole and press the bridge pins out; however, occasionally one will get stuck and be difficult to remove then the puller is a good tool to have. One of the best bridge pin pullers available. Does not damage bridge.
John P.
2025-08-16 17:07:25
Works good if bridge pins aren’t too tight. The puller pops off the pin if they are too tight.
timmwood
2025-07-24 10:29:00
I hate pulling bridge pins on an acoustic guitar. When it was time to change the strings on my acoustic guitar, I bought this tool in the hopes it would make the task at least tolerable. The first four pins came out easily. The final two were a different matter. I must have pushed the pins in too far when I last re-strung the guitar. After several attempts, one of the pins came out. The final one was even more difficult. I even tried another bridge pin tool I had, but it didn't work. I made one more try with this product and finally got the pin out. I recommend this tool. Unless the bridge pin is improperly installed, this tool makes pin pulling easy. Ultimately, it worked on the tough pins as well.
Mystical Reality Is
2025-07-19 20:06:02
Works well...
David Chall
2025-07-17 16:02:52
Did what it was supposed to. Pins came out easy with no scratches or broken strings. Happy with my purchase.
AldiCoso
2025-07-10 16:44:20
Good quality, works fine.
José Carlos
2025-06-17 15:26:05
Excelente producto lo compré para los pines de una guitarra Fender Electroacústica modelo: CD-60SCE y sin problemas le quedan y seguramente es compatible con todas las marcas 10 de 10
Luciano
2025-06-13 11:47:46
O material da ferramenta é de bastante qualidade, porém não funciona bem para remover pinos muito emperrados no cavalete. Funciona, na maioria dos casos, mas pode ser complicado, na situação descrita acima.
Mr. N. Pearson
2025-06-04 10:17:20
Having used a variety of specialist and improvised tools for this purpose over the years, I have to say this is the best option out there. Removes bridge pins with out requiring you to pull upwards and won’t mark the bridge or pin due to the soft surfaces in the right places,
RunningEd
2025-05-27 17:55:15
Sehr praktisch und macht nichts kaputt.Hat mir als „Anfänger“ das Wechseln erleichtert…
DS Illinois
2025-04-29 16:27:37
Simplicity is sometimes the most overlooked thing in design. This little tool uses simple leverage to gently roll your pin up and out of the bridge of your acoustic guitar. If you need to get to the pin from another angle the curve has a "nub" on it to place your roll up just perfectly for your guitar bridge. No more accidental slips, damages, or beating up the pin. Very strong and comfortable to use.Amazing no one thought of this before. I'm glad a U.S. Company is inventing this stuff and delivering a quality, build even if it is built somewhere else. I'm tired of poorly made gadgets that don't work from other parts of the world - the good news is this one works well. On this tool I can't see anywhere it could fail or wear down.
Customer
2025-04-09 17:59:10
I bought this after putting several dents in my Alvarez-Yairi guitar top while trying to get the bridge pins out. This is the only bridge pin pulling tool I've found that works safely on the Yairi decoupled bridge design. Rest this thing on the guitar saddle and pivot down to reach the bridge pin. No more
jim p.
2025-03-28 10:12:55
Very easy to use and .removed stings I couldn't budge
VC Alabama
2025-03-15 21:19:20
I usually loosen the strings and reach through the sound hole and press the bridge pins out; however, occasionally one will get stuck and be difficult to remove then the puller is a good tool to have. One of the best bridge pin pullers available. Does not damage bridge.
John P.
2025-02-26 15:46:22
Works good if bridge pins aren’t too tight. The puller pops off the pin if they are too tight.
timmwood
2025-02-17 11:44:18
I hate pulling bridge pins on an acoustic guitar. When it was time to change the strings on my acoustic guitar, I bought this tool in the hopes it would make the task at least tolerable. The first four pins came out easily. The final two were a different matter. I must have pushed the pins in too far when I last re-strung the guitar. After several attempts, one of the pins came out. The final one was even more difficult. I even tried another bridge pin tool I had, but it didn't work. I made one more try with this product and finally got the pin out. I recommend this tool. Unless the bridge pin is improperly installed, this tool makes pin pulling easy. Ultimately, it worked on the tough pins as well.
Mystical Reality Is
2025-02-12 18:00:00
Works well...
David Chall
2025-01-30 14:58:31
Did what it was supposed to. Pins came out easy with no scratches or broken strings. Happy with my purchase.
AldiCoso
2025-01-18 16:02:25
Good quality, works fine.
José Carlos
2024-12-30 21:48:26
Excelente producto lo compré para los pines de una guitarra Fender Electroacústica modelo: CD-60SCE y sin problemas le quedan y seguramente es compatible con todas las marcas 10 de 10
Luciano
2024-12-28 15:38:27
O material da ferramenta é de bastante qualidade, porém não funciona bem para remover pinos muito emperrados no cavalete. Funciona, na maioria dos casos, mas pode ser complicado, na situação descrita acima.
Mr. N. Pearson
2024-12-27 16:49:54
Having used a variety of specialist and improvised tools for this purpose over the years, I have to say this is the best option out there. Removes bridge pins with out requiring you to pull upwards and won’t mark the bridge or pin due to the soft surfaces in the right places,
RunningEd
2024-12-19 20:07:38
Sehr praktisch und macht nichts kaputt.Hat mir als „Anfänger“ das Wechseln erleichtert…
Recommended Products
