Your cart is empty.
Your cart is empty.THIS MUST BE PLUGGED IN DIRECTLY AT THE TAIL LIGHT. IT WILL NOT WORK PLUGGED IN ANYWHERE ELSE. IT WILL FIT AT ANOTHER CONNECTOR ALONG THE BED BUT THIS IS NOT WHERE IT GOES. You can use this at either tail light and can use two per vehicle if you want to power a whip on both sides. This listing is only for one but we also sell them in 2-packs. WIRING INSTRUCTIONS: The red and yellow wires are both power wires. You only need to use ONE of them. You can cut off the unused one and wrap the end in electrical tape. Yellow will provide 12v any time the key is on. Red will only provide 12v when the brake pedal is pressed. Use the yellow wire to power accessories such as whips and license plate lights. Use the red wire to power additional brake lights. Use the black ground for all applications. THIS MUST BE PLUGGED IN DIRECTLY AT THE TAIL LIGHT. IT WILL NOT WORK PLUGGED IN ANYWHERE ELSE. IT WILL FIT AT ANOTHER CONNECTOR ALONG THE BED BUT THIS IS NOT WHERE IT GOES.
Kirk W. Space
2025-08-23 18:42:30
This was nice and easy to install and worked great to power my license plate light. I’ll be purchasing another one to power whip lights. It appears to be good quality. I would have no problem recommending this harness.
Oscar cruz
2025-07-12 18:08:41
Works on my polaris sportsman xp1000 2024
S C
2025-06-09 10:52:33
This does NOT fit the RZR 900 Trail. Well let me clarify, it does plug in to the headlight but your headlight will not work. Incorrect description as to what it is.
barefoot1
2025-06-03 17:50:06
I watched the video on the install and it seemed perfectly straightforward. I was installing on a 2017 RZR XP1000. After install the light would NOT shut off even with the key off. It WOULD shut off when you put on the brake---WTF? So I went back to the computer and looked up the customer questions on Amazon. The manufacturer posted the following message in all caps ahead of all the customer questions. Guys it really would have been nice to have this included with the directions that came with it. I attached the harness directly to the tail light connector and now all is good. SEE THE FOLLOWING that was posted ahead of the customer questions on Amazon."THIS MUST BE PLUGGED IN DIRECTLY AT THE TAIL LIGHT. IT WILL NOT WORK PLUGGED IN ANYWHERE ELSE. IT WILL FIT AT ANOTHER CONNECTOR ALONG THE BED BUT THIS IS NOT WHERE IT GOES. You can use this at either tail light and can use two per vehicle if you want to power a whip on both sides. This listing is only for one but we also sell them in 2-packs. WIRING INSTRUCTIONS: The red and yellow wires are both power wires. You only need to use ONE of them. You can cut off the unused one and wrap the end in electrical tape. Yellow will provide 12v any time the key is on. Red will only provide 12v when the brake pedal is pressed. Use the yellow wire to power accessories such as whips and license plate lights. Use the red wire to power additional brake lights. Use the black ground for all applications. THIS MUST BE PLUGGED IN DIRECTLY AT THE TAIL LIGHT. IT WILL NOT WORK PLUGGED IN ANYWHERE ELSE. IT WILL FIT AT ANOTHER CONNECTOR ALONG THE BED BUT THIS IS NOT WHERE IT GOES. "
Snowsleder
2025-03-22 16:20:22
Just plug it in. Hook up 2 whip light wires to it. Stow and go. VERY EZ and FAST. Great price and fast shipping.
Robyn White
2025-02-02 18:39:12
Bought a set of whips light bars for my rzr, then I did my research, and this thing made hookup a 1000% easier. Plug one end into the lights, take back break light plug in other end, then the single end plugs back into the brake light spot, boom, done. Very easy.
Steven D.
2025-01-30 12:28:11
Not only did it come a day earlier than anticipated, but it was really easy to install and they provide everything you’ll need!Took probably 5 minutes and my lights were up and going.PS...Just remember, use the yellow wireThe red wire is only power then you hit the breaks!I made this mistake and reverted back to the page I bought these from and it says it right there!
J. Kindopp
2025-01-15 15:28:50
The cable harness that I received is the same harness that you see pictured in the description of this product. After installing the harness, the 12VDC power line was not available on any of the three pigtails. Using voltage multimeter, I was able to determine that the pin 1 and pin 4 were required for a 12VDC connection on a Polaris Ranger 1000 Premium UTV. I was able to use a small screwdriver to move one of the cable connections to the pin 4 adapter on both sides of the harness to alleviate my issue, but I would recommend for others to purchase a similar adapter harness that includes both the pin1 and the pin4 cables. Everything works after I made the adjustment to my harness, but it did waste time troubleshooting it.
Recommended Products
