Your cart is empty.
Your cart is empty.Product Description
Mainly used for coating the specified thickness of wet film to measure the covering power, color and preparation of sample.
Advantages:
- Use advanced stainless steel wear - resistant material, durable.
- An applicator has four thicknesses and four different wet film thicknesses are easily required to convert the angle.
- Suitable for water, acid and alkaline products.
Various Sizes:
Models are as follows:
NO/1:(5μm, 10μm, 15μm, 20μm)
NO/2:(10μm, 15μm, 20μm, 25μm)
NO/3:(25μm, 50μm, 75μm, 100μm)
NO/4:(50μm, 100μm, 150μm, 200μm)
NO/5:(30μm, 60μm, 90μm, 120μm)
NO/6:(100μm, 200μm, 300μm, 400μm)
NO/7:(50μm, 75μm, 100μm, 150μm)
NO/8:(100μm, 150μm, 200μm, 250μm)
NO/9:（250μm， 500μm，750μm，1000μm）
- Effective coating width: 80mm
- Overall Length:100mm
- Please specify model you need, the default choice: NO/4.
Effect display：
METHOD OF APPLICATION:
1. Fix the sample on the platform and it cann't move when the preparer slides over.
2. Select the preparation device according to the required wet film thickness, and place it on the short side of the sample plate, close to the parallel or specified position.
3. Pour about 5 ml of the sample on the front of the preparer, hold the ends with your fingers, and let it slide at a constant speed of 150 mm/sec, then obtain the wet film of the required thickness.
4. After use, wash it with solvent and apply oil or vaseline.
Related to this product:
ASIN:B07G55ZP61
ASIN:B07G5KCZS2
ASIN:B07G4ZWBFL
ASIN:B07G53QY8J
PEDRO
2025-01-25 15:27:37
Gran producto
Recommended Products