Your cart is empty.
Your cart is empty.
Product Description:
RJ11 or RJ12 6P6C pass through connectors with 3 prong gold plated pins provide a simple and precise way to terminate phone cord for landline, creating custom length telephone cables
Why Us?
NECABLES is not only a brand, we have our own factory which has been engineering and manufacturing these telephone connectors, cables and adapters for almost 20 years
Specifications:
- Connector Style: Pass thru RJ12 6P6C male plug (6 Position 6 Conductor)
- Housing Material: Durable plastic PC, transparent
- Pins Material: Copper alloy
- Pins Surface Treatment: 6 micron gold plating (contact area) on 30 micron nickel plating
- Pins Style: 3 prong type
- Better mechanical and electrical performance than 2 prong type
- Easy to crimp and will hold the wires more tightly than 2 prong type
- Useful life: More than 750 times
- 20 pcs per bag
Attention:
- Before crimping, please make sure that the wires color code are completely correct or exactly what you need
- If your crimping tool does not have a blade for 6P side, crimp it at the 6P side and cut at 8P side (a small tip)
Warranty:
NECABLES offers 30 Days Money-Back and 12 Months replacement service
Jestin
2025-08-22 19:26:11
These save so much time and work amazingly
Thom H.
2025-08-11 14:24:23
I'm not the most patient individual, and prepping RJ connectors brought out the worst in me. This time, my buddy suggested pass through RJs, something I had never tried before. Wow, what a difference! I'll never use anything but pass throughs now.
GaryS
2025-07-16 17:46:28
This review is for the 6P4C version.I happened to use a couple successfully on a test cable, but then I I noticed when looking closely that all 6 pass thru holes are there they are just missing the outer 2 crimp contacts. No issue if you double check before crimping that the wires are centered with the outer most holes empty. I happened to order the 6P6C versions too and since these will be used to terminate cat5/cat6 cables in use for bonded DSL, I think I will use the 6P6C and install the outer 2 wires instead of cutting them off, less chance of making a mistake. I found on the test pc that I made that pulling the outer jacket back and cutting the unused wires off shorter than the cover makes more room to fit the jacket into the end of the connector. It could be tighter on the 6P6C connector.
Hondo2019
2025-07-09 11:06:47
Worked GREAT!
RZRRick
2025-06-23 13:47:44
I had to buy the special crimper/cutter these require, but they work so nice! I'll be ordering more.
David Johnson
2025-06-21 14:36:41
This product had some quality control issues. After putting on the connectors I noticed some worked, some didn't. After visual inspections I found that many connectors were missing some copper contacts in the end that gets crimped so not all 8 conductors were connected.
P. Girard
2025-05-27 12:48:45
These are VERY fussy about the outer diameter of the wire insulation, the pass-through holes are very small, and seem imperceptably smaller than similar designs I've used for RJ45 terminals and cabling. I've tried several vintages and configurations of telco and ethernet wire, of my stock only the Cat6 24AWG8 with 4 twisted pairs and very thin insulation was small enough, leaving unused wire, the RJ11/12 jack only holding 6 max (Cat3 capable, mostly telecom, security systems and the line). I suppose I should try a wire/jeweler drill size to see if they really are smaller.
mike
2025-05-13 16:12:14
Just ok nothing special I would look elsewhere for a different manufacturer
Rino M.
2025-04-27 19:24:35
tks
Paul Hansen
2025-02-07 18:15:13
They look like they work very well they had a change in phone plans
Recommended Products
