Your cart is empty.
Your cart is empty.Product Description
Slim Black Lighted Doorbell Button
A simple lighted surface mount door bell push button switch can be used on stucco or wood surfaces. For use with Doorbell Chimes, Ringers, and Buzzers.
COMPACT SIZE
Measuring 2 3/4 inches high and 7/8 inches wide. Made from sturdy black plastic, can be used with doorbell chimes, ringers, and door buzzers.
STUDY PLASTIC
Slim, black design with a sturdy rectangular housing. Works with any door bell transformer and any wired chime (bell wire is not included).
LIGHTED FOR NIGHT USE
Lighted surface mount push button switch. Can be installed on stucco or wood surface. Easy to see doorbell button at night or in low light.
DianaraPHOTO
2025-08-20 11:04:19
The doorbell is beautiful, never thought I'd say that about a doorbell. It works well too, and even though it did not come with instructions, I was able to common sense it and install it within a few minutes.Let me tell you though, there's nothing like a newly working doorbell to accentuate how many times you order from DoorDash. Lol
Darth
2025-08-06 14:45:01
Easy to install and a good replacement for the original button.
Josie karlovic
2025-07-16 18:12:04
Better than most doorbells I have installed! Thanks!
katerina
2025-06-11 16:18:23
My husband installed it and it works ok! we have the door bell through the camera by the door but its not loud enough. Ordered these to replace an old one and its works.
Sarika dawar
2025-05-28 11:32:52
The doorbell is very bright, and the installation was SO easy. Just had to unscrew the old broken one and screw in the new one. The door chime works. I needed it to replace an old Blink doorbell that we didn't know could only run on batteries, so we needed to get a wired bell.
j riley
2025-04-01 10:58:30
I bought two of these as replacements. I am not a dyi person, however it was very easy for even me to replace my old ones.
BSquared18
2025-02-26 12:20:09
I decided to purchase the unlighted version because (a) the unlighted arrived the next day, as opposed to one week for the lighted one and (b) the fewer features, the less chance there will be a problem. Also, at night at our home, a motion-activated light goes on, so the doorbell button is easy to see. If, as in my case, the screws and threaded screw holes that attach the old button to the wall are a slightly larger diameter than the very thin screws that come with the new button, you will want to bore out the holes in the new button's case to allow the old screws to pass through. The wires coming out of the wall for the original button were bent into a closed circle. Because the wires coming out of the wall are very short, I found it easier to bend the wires into "U" shapes instead of the original "O" shapes to fit the wires over the screws on the switch. The new button is working fine. By the way, the distance between the screw holes in the button's case is 2-1/8 inches, which worked perfectly for my setup. ADDED: Noticed that the doorbell is a bit louder with the new button, which is a nice added feature.
Ben M
2025-02-19 18:03:26
This was super easy to install but not sure if I installed it incorrectly (if that is even possible) since my doorbell is not lighted and I did buy the lighter version. I did confirm there is a light in there. Maybe mine is defective? I might return or try another. 3 stars for now.Update. Woke up to the doorbell ringing all night. Mine was for sure defective and will be returned.
Customer
2025-01-14 12:31:05
good
JoPo
2025-01-13 11:00:57
Original doorbell broke. Plastic on the switch cracked apart and the light stopped working.Found this one, which is an exact replacement.Super easy to install, just 2 wires. Super cheap compared to the local stores.It’s just a little thing, but makes the front entrance look respectable again.
CT
2025-01-09 10:21:20
It's a good cheap doorbell switch to replace an old corroded switch. The lit button is nice while it lasted (a few months) but burns out pretty quick since it's an unregulated incandescent bulb inside that is always lit. The switch still works perfectly fine for ringing the doorbell. I knew that going in from the other reviews so it was expected. Still, it is a great cheap non-fancy replacement for an old broken doorbell switch.
romance reader
2024-12-09 17:52:13
This is a very basic doorbell but works fine serve the purposes I needed it for and I'm happy with it but it's nothing fancy.
ðŸ»ðŸ‡¨ðŸ‡¦ Canadian Beer Is Better 🇨🇦ðŸ»
2024-11-30 18:31:26
I forget what kimd of LED bulb was in it but who cares 😂. It still works after 6 months! I was going to solder a blue LED into it becausée blue is decent and yellow is trash... All well, priorities I guess... Its a great product. Works well. Its super bright. Easy to install. Polarity doesn't matter.. Will buy again.. But i want a blue one! Or red.. Something other than yellow please! I should just buy a ton of these and install different color LEDs 😂. Maybe switch er up a bit eh? Cheers though! LOL
Recommended Products