Your cart is empty.
Your cart is empty.The 600 Series is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from strip steel and are carefully heat treated. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore. RBC Nice Bearings is a subsidiary of RBC Bearings. RBC Bearings has been providing bearing solutions to our customers since 1919. A publicly-traded company (NASDAQ: ROLL), RBC currently has 23 manufacturing facilities worldwide, with 18 located in the USA.
Robert Sieveking
2025-09-01 17:36:26
Though larger in outside diameter, this is a totally satisfactory thrust bearing for puller and punch applications. This is not a ground face bearing, and is not (probably) applicable to higher RPM applications, but for buffering a .750 (3/4") bolt head mounted in a gear puller or Greenlee style chassis punch I believe it will serve nicely. Ground face bearings are priced considerably higher than this bearing and are foreign made. I see that this is a USA bearing. For my application (as a manufacturer) I see the USA label as a plus, along with the diminished price. Buy a few, try them and if you are satisfied give INA the high sign. They look good to me. I would like to see the .750" thrust bearing in a slightly smaller OD. but the ones I received worked here. Will be ordering again.
Damon
2025-08-22 13:17:56
I use this on my hub tamer to reduce friction while pressing in and out sealed wheel bearings in cars and trucks. It's not designed for this purpose at all, but it holds together very well. I consistently abuse it with my 900 FT LB impact gun and it takes it. I honestly thought it would work once, maybe twice before it grenaded itself so I bought 5 of them. I've pressed 12 wheel bearings in and out with it and the first one is still working great. A spray lube into it before each use, (whatever I have close by) and I've been very impressed with it. I recommend these thrust bearings. I used to have issues with my hub tamer shredding itself because of the pressure it produces, and I was replacing forcing screws and several adaptors over the 15 years I've owned it. This bearing has saved me quite a bit of money not having to replace broken tools. I haven't had a tool failure since I started using the bearings.
MADJACK
2025-06-30 11:13:33
I machine to bunch of custom tools to rebuild my twin cam bottom end and I use this bearing in a bearing race removal and installation tool, it's suited my needs perfectly and is nice and smooth in operation
novalyn gudoy
2025-04-22 17:15:35
Awesome product for the price. Same as INA D5 bearing but only made in USA VS INDA(D5). Great bearing to use as a supplement to any front wheel bearing tool kit such as an OTC HUB TAMER/GRAPPLER.
simple collector
2025-04-11 17:34:05
Great thrust bearing, worked well supporting 600 lbs while swiveling.
MicroMonkey
2025-01-17 14:26:54
Its a little bit larger than the bearing on a harbor freight transmission jack by only a slight amount. The trans jack is .64 bore, but Since that jack isnt the best quality to start with, a set screw fell out and I lost the balls from one of the factory bearings. Used this to replace it. It comes dry, so dont forget to pack the bearings with some grease, like lucas or whatever you prefer to use. The stamp on the race that says "made in the usa" made me alot happier as well.
Dello
2025-01-09 20:34:57
Great quality bearings. Worked great for my application. Much cheaper than any comparable bearings that I priced. Dimensions as described in ad were very accurate.
JRC 21
2025-01-04 17:01:16
Used this bad boy to make a "lift table" out of angle iron with tile top for my patio. Worked great for this purpose. You just need to be sure to grease it well.
Recommended Products
$15.99
$ 7 .99 $7.99