Your cart is empty.
Your cart is empty.Product Description
Multi-Functional 5 Gang Switch Panel
PD Type C and USB charger+Voltmeter+12V outlet+5 Switches
Product integrated with a PD Type C and USB charger, digital Voltmeter, 12V outlet, waterproof panel, and 5 on/off toggle switches, this 12V/24V electrical panel can meet your various needs and widely applicable for most 12V-24V DC cars, UTVs/ATVs, trucks, trailers, RVs, caravans, buses, marine boats, yachts, airplanes, etc.
- Installation:pre-wired
- Material: Panel: Aluminum, Switch:ABS&PC
- Voltmeter display range: 0- 24VDC
- Cigarette Lighter: 12V DC
Cigarette Lighter Socket
Coming with 12V DC cigar lighter adapter, fits perfectly with compatible devices such as dashcam, GPS, air compressor pump, vacuum cleaner, air purifier, etc. Great choice for 12-24V DC car, SUVs, Vans, boats, motorcycles, RVs, etc.
Voltage Monitoring
Constructed with voltage display, allows real-time monitoring car voltage, safer to use.
PD Type C and USB Charger with LED
PD Type C and USB charger enables you to charge two devices simultaneously at full speed. Makes the charger 40% faster than conventional chargers.
How to disable the voltmeter to prevent battery discharge? -Hook it up to accessory power so it only operates when the key is on.
Safety protection
Pre-wire design with 15A inline fuse providing you with an overload, over-current and short circuit protection.
Widely Use
Available for controlling LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc.
1
Application
This switch is suitable for 12v-24v systems and widely applicable for most DC 12v-24v cars, TV/ATV, trucks, trailer, RV, caravan, bus, marine boat, yacht, airplane, etc.
1
TimG
2025-09-02 15:20:02
This is a nice switch panel that allows individual circuits to be turned on and off. Each circuit is fused ported. Panel also includes a 12 volt socket, a USB socket, and a voltage level indicator. Great upgrade for boat.
widget
2025-08-18 13:20:07
I used this for an 80s era Kubota front loader with a Curtis Cab on it. I needed switches for the flood lights, windshield wiper, and heater.I didn't know what to mount it with, so I used a Ford front license plate holder from a mid 00s Explorer that I cut in half, flipped sideways, and mounted next to the "dash" area on the Kubota...What I didn't like was the default wiring provided a constant power draw when hooked up to a wire directly to the battery, showing me the voltage. So, I simply switched the default wires on the input and output (daisy chain) of the first switch. Now, that switch is a "power on" switch for the entire unit that doesn't draw power until it is engaged.Got to test out the tractor and switches with a recent snow storm and everything worked as it should. So, it was a fun project with a lot of utility and very bright readouts... I'm happy with it.
John B.
2025-08-17 11:07:08
I've bought a couple of these because they're simple, well made of solid aluminum, and easily re-configurable. So when I needed a second distribution/switch panel it was a no-brainer to get another of these. Of note is the fact that the round 3/4" diameter switches are also removable and can be swapped out with 3/4" diameter dimmer switches available on amazon. My order was missing the mounting screws and the label sticker set, which I had to substitute with others, so I knocked off a star.
Isabella russo
2025-08-11 15:21:46
The Good: (1) Solid well made panel with quality switches. (2) Has everything one would want.The Bad: (1) I didn't need the screws as I bolted mine onto a large project box, but I would not have used them anyways because they are not stainless steel. They are black oxide. (2) The area below the bottom switches where the labels go is slightly depressed, but that comes through as a slightly raised section in the back meaning you'll need to cut away that area below for a very flat fit. I would have preferred having more of the panel surface flush with the project box. (3) No pattern is included for your cut-out or hole drill out. (4) The outlets for 12 volts (cig. lighter) and 5 volts (USB) were slightly askew and needed to be realigned (no big deal).Unknown: (1) Water resistance as it hasn't been used yet. But, the fuses and switches all appear to be sealed, although I'm a bit concerned on water getting in behind the switches. (2) Accuracy of the volt meter, but appears to be within a percent (i.e. within a tenth of a volt) based on preliminary check.
George
2025-05-13 14:40:49
Easy to mount, bright led bulb. Mount base seems to be substantial but not metal.
jimmie davis
2025-05-07 14:27:52
great product
Tony
2025-04-15 16:29:13
I've used Nilight switches before and have had good service.Positive -They are overall good quality.Sturdy aluminum mounting plate.The voltmeter is clear and easy to read.Includes inline 20 amp fuses for each circuit.These are very nice looking switches!Negative -Nothing really negative, just a few things to note, see belowThe LEDs are ON when the switch is OFF. This is backwards to me. I solved it by removing each switch and turning it upside down. This isn't a perfect solution because the switches have a small 'key' at the 3 o'clock position (looking at the front of the switch) But I was nevertheless able to mount them 'upside down'. Of course the LED's are now upside down as well, but it looks fine and it's not a reason to deduct a star.Second thing; the terminals aren't the standard 1/4" size. They are the smaller 'audio' style. The regular 1/4" connectors won't fit properly.Last minor thing, the supplied connectors lock on the terminals and you must push a small latch to get them to release. It can be difficult to do without a tool like needle nose pliers because the terminals are close together.The adhesive labels are a nice addition to the product, but if you're not installing it on a boat they're not really appropriate. I made my own with adhesive inkjet labels.
J. Simpson
2025-03-31 11:35:18
I thought I had to figure out switches and relays and wiring in my own but this switch panel does it for you! Literally plug-and-play so easy a kid could probably do it. Only thing I’m not a huge fan of is the rats nest of cable behind the switch. I’m sure smart folks have figured out how to make that look clean and tidy but I’m just gonna hide it in a little box and call it a day!Seriously though, this switch is awesome and I appreciate all of the LED color options it comes in. I can’t sleep with blue/green/yellow glowing lights, only red so it’s perfect that that was one of the options! I loved this switch so much that I’ve purchased several other smaller switch panels from the same company and they’re all just as high quality and easy to install!
Khalid
2025-03-01 16:48:48
ممتاز
Customer
2025-02-28 12:23:51
Good quality! So easy to instal
Rob L
2025-02-24 11:26:06
I put this in my 14 foot fishing boat. Has my lights and a small bilge pump hooked up to it. Very easy to wire, the stick on labels are still attached and easy to read a year later.
Pavel Lebedev
2025-02-22 13:49:22
All switches installed up side down, and wires are not sized correctly. Your combined load should not exceed 15A or you are risking a fire. But for what it's worth all and all it's a pretty good product.
Andrée
2024-12-06 18:10:33
USB connector doesn't work had to replace it !
Recommended Products