Your cart is empty.
Your cart is empty.Product Description
Product Structure
- LED Power: 39W/PC; Beam Pattern: Spot Flood Combo Beam
- LED Color Temperature: Pure White 6000K-6500K; Operating temperature: -20℃～+45℃
- Material: 6063 Aluminum Profile, High quality Led Chips, PC Lens
- Input Voltage: 9-30V DC (fits 12V, 24V vehicles); Current consumption: 12V/1.5A, 24V/0.71A
Key Features
Heat dissipation
10pcs Cooling fans and High quality Die-casting Alu housing fast heat-dissipation.
IP67 Improve Waterproof Design
The waterproof rubber pad and silicone sealing strip as the second protection the light better handle different kinds of weather
Advanced Chip Techs
High-quality LED chips emit bright and white light. Its perfect combination of flood beams provides wide-spread illumination, light up the darkness.
User-friendly Mounting
Comes with paper model to confirm and mark out the exact holes size and mounting position. Be of great help, labor and time saving!
Strictly Test :
Temperature & Humidity Test
To ensure that the unit can withstand a wide range of temperature without reduce light output safety.
Working Temperature: -20~45 degrees Celsius
Dust Test
To ensure the unit is preperly sealed against harmfull road dust and debris.
Salt Spray Test
To ensure that the unit can withstand against oxidation caused by salt on the coastal area and from winter condition.
Moisture Test
To ensure that the unit do not cause moisture buildup leading to reduce visibility.
Can work as front bumper light, rear bumper light, fog Light and backup light
BigJess
2025-09-04 13:12:13
I am in love with these lights. They are super powerful and light up the darkness, gospel style. I cut them into my rear bumper, and am glad I didn't use mounts. I have the aux switches in my console so they are super convenient to illuminate.A couple of things I wish I'd known after investing two hours:1. They do not come with a rubber gasket so if your surface isn't perfectly flush like my bumper, know that is won't mount flush.2. The wire that is used is probably 18 gauge at best. It's very small and the feeder wire I used was #14 so I had to use some creativity crimping. I wish the wire was a touch bigger.3. If you are drilling through steel, make sure you have good bits and start a large pilot hole. If you remove the light to finish drilling, it won't be perfect as the bit walks a bit as I'm sure you know.4. Obviously make sure you have nothing behind the mount point.5. A nice upgrade would be black mounting bolts, if you are really concerned about the look, you may want to get black bolts.6. When you trace your template (provided) make sure you tape it down as it will move. Also, take the line out with your cut. The template runs a little small / actual and gives you no room to wiggle.Hope these tips are helpful, they are very bright and seem to be good quality.
kellyb
2025-07-05 18:40:47
The OEM halogen reversing and side area lights on our 2006 Travel Supreme Select were more rust inside than intact reflector/deflector. Remarkably, half of them still worked, though they were more like a couple of candles, not halogen lamps.These were easy to install, the template is nice, hardware looks nice, and the lamps themselves are not cheap-feeling. Solid, large metal heat sink. I do wish there were more flood than spot, but that's a personal thing.
Danny S.
2025-05-23 18:17:05
fast shipment-packaged 4 a safe ride-light are bright as hell- gonna mount these in my rear bumper for backup lights
Lee
2025-04-17 17:44:00
Great lights and easy to install.
Michael Lindsay
2025-04-08 11:01:34
Well made product; very involved installation. I chose to place mine in the tailgate of my pickup, which requires cutting holes in the sheetmetal.
Johnathan
2025-03-27 13:42:25
Put these on my trailer for backup lights and they work pretty good
Justin Rockhill
2025-02-06 10:36:12
They’re bright, still renovating my car hauler trailer but they’re on the trailer and I tested them to a battery. They’re bright that’s for sure, we’ll see how they hold up but seem to be well made.
Robert
2025-01-26 12:28:34
I had to modify them to fit my application so I can very well return themThey both came on and looked awesome for a second then one turned off. So, I’m down to 1 light and can’t returnNot super stoked. So, I had to order another set. Ugghh
Len from Edmonton
2025-01-24 18:00:39
I never thought I would say this but these are possibly to Bright !!!! Blinding in daylight Great brightness & fitJust drill between rubber flaps that hold old lights Perfect ! & 6 times as bright as stock
Recommended Products