Your cart is empty.
Your cart is empty.Nilight 7/8" Motorcycle Handlebar Switch Plug and play switch Working Voltage: 12V DC. Switch Operation: On/Off. Fitment:: Apply for the diameter of 7/8” grips. This switch fits most 12V DC motorcycles, bicycles, scooters, ATVs, snowmobiles, trucks, tractors for any handlebar of 7/8" diameter. can be used to control Headlights, aux driving lights, LED lights, LED work lights, rear lights, fog lights, driving lights, taillights, off-road lights, etc.
Cheyenne S
2025-08-19 13:15:09
I bought this switch because I got a relay wiring harness for aux lights from the same brand that had a typical automotive switch, and I hoped this handlebar switch would be a direct plug and play with that harness - it was!-Install was easy, 2 screws and it fits snug on my 7/8th inch handlebars without moving around.-the switch has a rubber boot but I would say it is more of a water deterrent instead of a seal as the boot is held in place by the pressure of the switch clipped into the casing.-the wires coming out the back do have a nice thick wire loom or shrink wrap that I expect will protect the wires but there is no silicone or anything keeping water from the inside of the switch. I will probably add a drop of silicone myself, but I was glad they didn’t have it because it allows you to remove the switch from the casing if you need to for any reason.*Update: since writing the original review I have ridden my bike in heavy rainfall multiple times. The only way I could have exposed the switch to more water was if I submerged it in a bucket. No issues, no flickering, still works exactly as it should so I believe it is as water resistant as it needs to be for a motorcycle application.Overall happy with it, looks good on my bike and it works. Very easy install.
Cody
2025-08-15 17:58:02
Works great, fits the regular standard handle bar. I installed on cforce 400 atv for light bar.
Cody Jacks
2025-08-09 20:08:32
Part required machining before it would function. The screws were really short, and the housing demanded longer screws to fit over the advertised handlebar size, so I had to drill out the holes in the housing to shorten the distance the screws needed to bridge. The manufacturing was pretty poor; the part was missing metal, and seems to be poorly molded, rather than milled from a solid piece, but it does function with some modification. Hopefully the threads will hold and it will fare the conditions. Otherwise, the switch functions as advertised. I wish this was an option with the kit I bought so I didn’t have to buy a second switch, which nearly doubled the price of the project (pair of cube lights with controller, cables, and switch were $25, whereas the second switch was an extra $15), but I’m happy with the end result.
Elliott Evans
2025-08-06 21:04:25
Perfect fit for my KTM 390 adventure handlebars, wired in easily to my harbor freight spotlights
Kevin M.
2025-08-02 10:59:58
The switch illuminates when it's turned on I like that feature, But I don't think there's much else you can say about an on off switch it does what it's supposed to do and I'm happy with it.
Scott D
2025-07-23 09:55:38
Switch looks good and seems to be made of good quality very easy install
Aung Thura
2025-07-09 10:44:57
Good
Customer
2025-07-08 16:56:00
The switch mounting bracket was not properly milled, which made it difficult to properly line up to secure. In the process I could not get the second screw on. May have to do some drilling to round out the bracket. 10 min project swap will turn into a 1.5 hour fix.
Michael D.
2025-07-07 15:21:07
Parfait pour bar led vtt
Moieen Baig
2025-06-23 18:40:35
Fits perfectly with Nilight lights, that comes with plug & play wiring kit. Recommended.
Customer
2025-06-19 15:45:18
Legit quality product great 😊🙌
Gordon W
2025-06-16 12:33:40
Much better quality than other similar switches. Great to have a matching connector-- no splicing.
Alain
2025-06-11 14:53:52
Easy to install
Cheyenne S
2025-06-08 15:32:15
I bought this switch because I got a relay wiring harness for aux lights from the same brand that had a typical automotive switch, and I hoped this handlebar switch would be a direct plug and play with that harness - it was!-Install was easy, 2 screws and it fits snug on my 7/8th inch handlebars without moving around.-the switch has a rubber boot but I would say it is more of a water deterrent instead of a seal as the boot is held in place by the pressure of the switch clipped into the casing.-the wires coming out the back do have a nice thick wire loom or shrink wrap that I expect will protect the wires but there is no silicone or anything keeping water from the inside of the switch. I will probably add a drop of silicone myself, but I was glad they didn’t have it because it allows you to remove the switch from the casing if you need to for any reason.*Update: since writing the original review I have ridden my bike in heavy rainfall multiple times. The only way I could have exposed the switch to more water was if I submerged it in a bucket. No issues, no flickering, still works exactly as it should so I believe it is as water resistant as it needs to be for a motorcycle application.Overall happy with it, looks good on my bike and it works. Very easy install.
Cody
2025-06-02 15:25:10
Works great, fits the regular standard handle bar. I installed on cforce 400 atv for light bar.
Cody Jacks
2025-05-23 12:27:29
Part required machining before it would function. The screws were really short, and the housing demanded longer screws to fit over the advertised handlebar size, so I had to drill out the holes in the housing to shorten the distance the screws needed to bridge. The manufacturing was pretty poor; the part was missing metal, and seems to be poorly molded, rather than milled from a solid piece, but it does function with some modification. Hopefully the threads will hold and it will fare the conditions. Otherwise, the switch functions as advertised. I wish this was an option with the kit I bought so I didn’t have to buy a second switch, which nearly doubled the price of the project (pair of cube lights with controller, cables, and switch were $25, whereas the second switch was an extra $15), but I’m happy with the end result.
Elliott Evans
2025-04-20 10:31:15
Perfect fit for my KTM 390 adventure handlebars, wired in easily to my harbor freight spotlights
Kevin M.
2025-04-11 10:02:36
The switch illuminates when it's turned on I like that feature, But I don't think there's much else you can say about an on off switch it does what it's supposed to do and I'm happy with it.
Scott D
2025-04-06 12:18:56
Switch looks good and seems to be made of good quality very easy install
Aung Thura
2025-04-05 13:46:38
Good
Customer
2025-03-20 13:46:23
The switch mounting bracket was not properly milled, which made it difficult to properly line up to secure. In the process I could not get the second screw on. May have to do some drilling to round out the bracket. 10 min project swap will turn into a 1.5 hour fix.
Michael D.
2025-02-23 14:27:02
Parfait pour bar led vtt
Moieen Baig
2025-02-15 18:24:26
Fits perfectly with Nilight lights, that comes with plug & play wiring kit. Recommended.
Customer
2025-02-11 19:57:59
Legit quality product great 😊🙌
Gordon W
2025-02-02 14:35:29
Much better quality than other similar switches. Great to have a matching connector-- no splicing.
Alain
2025-01-25 17:01:23
Easy to install
Recommended Products
