Your cart is empty.
Your cart is empty.Product Description
Load Your Projects Without Computer
With the Genmitsu offline controller module, you can control the CNC router or Laser Engraving Machine without connecting to a computer. Easily load your projects onto the included SD card and have them ready to go without needing a dedicated laptop or computer.
Jog Each Axis Continuously with a Long Press of the Button
You don’t need to move the axis with small fixed increments by pressing the button repeatedly. It makes the operation easier and saves you time.
Find the Problem Easily with Prompt Messages
This upgraded offline controller can diagnose three types of ERR and nine types of ALARM error prompt messages. You can easily find the problem efficiently and continue your project quickly.
Improved Compatibility with Gcode
This upgraded offline controller can even recognize some non-standard codes, effectively preventing interruptions or misalignment when engraving.
Functions:
- Control X, Y, Z-axis moving
- Control spindle on/off
- Adjust spindle speed, step
- Gcode Running
Package List
1 x Offline Controller
1 x 10 PIN ISP Cable
1 x SD Card
1 x USB Stick
Bill Cunningham
2025-08-29 16:26:44
This allows you to run projects without having to keep the compute hooked up to the cnc. Jogging is much faster than click buttons on a computer screen but the interface takes some getting used to.
Earl
2025-08-26 13:18:59
Easy to use ,price not bad,is it necessary, probably not but makes adjustments little easier,and nice to have it closer to you
Axel D.
2025-08-07 14:14:42
Description says: "Compatible with Genmitsu CNC Router 3018-PROVer V2, 3020-PRO MAX V2 and LC-50 PLUS Laser Engraving Machine. (NOTE: It DOESN'T compatible with 3020-PRO MAX V1)"I have a 3020-PRO MAX V2, I didn't realize mine has an 8 pin cable, this one is a 10 pin cable.Won't work, waste of money.
Tarat
2025-07-29 10:43:52
Works well
Terry B.
2025-06-10 14:31:24
I purchased this controller along with the SainSmart CNC controller to use on my custom 3018, the SainSmart controller has the GRBL 1.1 and works fine, all parameters are adjustable. This Gemintsu offline controller is pre configured with built in parameters such as probe distance, the probe distance is only 50mm and cannot be altered, the select and red/return buttons are cumbersome, the select button actually scrolls thru the display items and not the arrow buttons, the red/return button is actually the select or enter button to select the item on the screen. For my setup I still have to use a PC to get the machine setup prior to running any jobs, the Genmitsu is not worth the money invested.Update; Even though this display is not useful for my setup, it does work. The seller even reached out to me and offered a refund for my troubles, this was greatly appreciated and I do recommend this seller! A++
Ray
2025-05-10 21:43:16
Bought the "Cheaper" Version that was at a lower price to work in tandem with the Control Module. All looked good, except NO SD CARD nor USB drive with supported files to work with Offline Controller. Only received the Offline Controller and Cord to go with it, (That's it). You could possibly use the Files that came with " A " CNC machine you've bought and or previously bought, that comes with an Offline controller, but good luck it's probably a 50/50 chance it'll work. Good Luck trying to find supported files. The Actual Company don't have the files for download; a heads up justttttttttttt incase you didn't get a SD & or USB drive. Would be a 5 start, but selling for a cheaper price and not providing all what's shown to be delivered it quite heart breaking.
Taylor
2025-04-18 11:37:20
Plugged everything in and I’m only receiving a blank screen. Can’t get any use out of the controller.
Customer
2025-01-04 18:48:29
product fine. horrible customer service
Recommended Products